Question about Honda NF 100 Wave Motorcycles

1 Answer

I turn ON the switch but the front light right side stay solid not blinking and the rear side has no light at all.I swapped the rear bulb to the left side,turn switch ON then bulb was function and blinking.The bulb on the rear side means was not busted.What was the problem on this, it is on bulb or on the electrical wiring?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,267 Answers

I suspect that your battery is low on charge. If this is an older model, then it takes about 11 volts or more to operate the flasher unit on older bikes. Not so with more modern bikes as the flasher is electonic. My Yahama does the same thing when the battery is low. You may want to check that the flasher is really working as the contacts inside the flasher unit stick or burned. You may have to replace the flasher. Just for fun recharge your battery for a few hours and try again.

Posted on Jan 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alpha Romeo 156 My Left hand indicator light stays on continually, does not flash. and when I turn the hazard light switch on both indicators continually glow.


Generally speaking, symptoms of a bad or failing turn signal bulb are usually the culprit...in your case, either it's the front left or rear bulb. Varies for different vehicle makes...common signs include:
  1. turn signal light staying on solid
  2. or blinking very fast
  3. or either sides of the bulbs stop blinking altogether.
To test this, make sure you reconnect everything you disconnected.
Turn the left signal light on; go to the front of the vehicle, is the turn signal bulb illuminated? If it lights up, even though it is not blinking obviously the bulb is okay. If it doesn't, replace it- problem solved. You'll do the same procedure for the rear turn signal Is that lit up? If not replace the bulb and the problem is solved.
Another common failure is when the turn signal blinks really fast, same procedure as mentioned above.
If both bulbs for the left side and right side illuminate but don't blink, the problem is in the steering column turn signal switch.
If the left or right side blinkers don't work properly at all...then check the integrated hazard warning/turn signal flasher relay- that may be defective; again, that's usually the case if both sides of the signal light don't work.
If you are blowing any fuses related to the flasher system, you have an electrical overload in the turn signal circuitry.

Feb 12, 2017 | Cars & Trucks

2 Answers

1999 buick lesabre my right signal doesnt blink it stays solid , my left turn signal blinks fine i have to manually blink the right side every turn , i put the hazard lights on and the front left and right...


The easiest thing for you to do would be to replace the bulbs that are on that circuit. You should have one or two bulbs with a double filament, one for the brake and turn signal and one for the tail light.
If that does not fix the problem, someone will need to check the circuit for power from the turn signal switch. It takes all of the lights on one side to make the turn signal flash.

May 16, 2013 | 1999 Buick LeSabre Custom

1 Answer

Kia turn signal works but blinks fast on right side when parking lights are on


turn on park lights and signal on right side and take a good look at the front and rear light , see if one is dimmer than the other this may be due to a bad ground and when the park lights are on and drawing more power it also needs better ground, check the sockets front and rear try wiggling the bulb to see which one is causing the problem

Jan 04, 2013 | Cars & Trucks

1 Answer

One of my turn signals flash but the other stays solid


could just be a faulty relay, if you have not had a problem before i would think it was the relay.

Jul 15, 2017 | Cars & Trucks

2 Answers

My right rear turn signal stays solid, won't blink, in the vehicle the right blinker light blinks excessively fast, I have a 1999 surburban


Sounds like a bad ground to me, although i am no expert.
i would be checkinh all connections and take it from there, a little wd40 might just solve it short term.

Nov 26, 2011 | 1999 GMC Suburban

1 Answer

83 Chevy S10 - the right blinker just stays lit, won't blink and no lights come on the right side at all.


put the hazard lights on and see if they all blink, if not, check the bulbs that dont blink. if all blink, (front and rear), the turn signal switch could be bad. putting the hazard lights on, checks the bulbs and wiring.

Sep 16, 2011 | 1983 Chevrolet S-10

1 Answer

Left turn signal comes on and flashes but not the right one


If the arrow stays on on the dash, you have a burnt bulb on the right side. If the front right bulb stays on and the right rear is out, the rear bulb is burnt. If the rear is on solid, the front is burnt. If both front and rear is on, either you have a bad connection at the sockets, bad turn signal relay, or a bad multifunction switch - which is usually the turn signal switch in the steering column.

Dec 19, 2010 | 1996 Ford Windstar

1 Answer

Turn signal light staying on in front driver side and back turn signal light blinking too fast on driver side in back. All bulbs good.


Double check your front drivers side bulb sounds to me like the bulb is bad. It may look ok but could be bad. You might try swapping bulbs between the right and left front lights to test it. If the problem moves to the other side then you've found your problem. Good luck.

Nov 03, 2009 | 1998 Buick Century

1 Answer

Right blinker does not blink


check your bulbs one is not working properly it can be either the front bulb or the rear bulb you can swap then with the left side and see what happen

Mar 27, 2009 | 1995 Plymouth Acclaim

2 Answers

When lights are on. Right blinker stays on sollid.


you need to change the bulb in either the front or back on the side thats not working

Jan 11, 2009 | 2002 Chevrolet Impala

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

144 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...