Question about 2004 kawasaki KX 250 F

1 Answer

How to clean carburator - 2004 kawasaki KX 250 F

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 11 Answers

Take it off and take the float bowl off and take a air and blow out all ports the the use carb cleaner and spray the inside of carb then put it back together and put back on turn the gas on to let the bowl fill up then start the bike

Posted on Mar 13, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant start my craftsman leaf blower


Chances are your carburator has dirt in it.
It doesn't take much to clog those little carbs.
Empty the gas tank and clean it.
Purchase a can of small engine carburator cleaner. Comes in a spray can for about $5 at Home Depot or Lowes.
Remove the carburator and disassemble it.
Soak the body in clean gasoline for about 15 minutes if you can, agitate it to help the gas disolve any clogs.
Clean the ports with the spray cleaner to blow out any debris.
Reassemble and remount the carb.
Remove, clean and gap the spark plug
Refuel the gas tank with new clean gas

May 16, 2011 | Craftsman Garden

1 Answer

Very hard to start, i pull and pull and pull on the cord but it wont start i do prime it every third pull any ideas?


Chances are your carburator has dirt in it.
It doesn't take much to clog those little carbs.
Empty the gas tank and clean it.
Purchase a can of small engine carburator cleaner. Comes in a spray can for about $5 at Home Depot or Lowes.
Remove the carburator and disassemble it.
Soak the body in clean gasoline for about 15 minutes if you can agitate it do so to help the gas disolve any clogs.
Clean the ports with the spray cleaners to blow out any debris.
Reassemble and remount the carb.
Remove, clean and gap the spark plug
Refuel the gas tank with new clean gas

May 07, 2011 | Ryobi Garden

1 Answer

It wont run without chokeing


one of the cause for not run right is dirty fuel filter or your carburator need to be clean in that case remove carburator and cleaned inside with carburator cleaner and try again

Apr 22, 2010 | Troy Bilt Tb70ss Gas Trimmer

1 Answer

Can i buy a carb cleaning kit at lowes, h depot or ace. i have a troybilt tb70ss, and am having some of the same problems, but my trimmer wont run at full speed. have to run the choke on mediun, instead of...


you can buy on any auto parts carburator cleaner. And make sure you have a clean filter inside the fuel tank use a little hanguer or any kind of wire for catch the filter be careful came loose easy some times. Cleaned with carburator cleaner and let dry or use air. another think is could be yor carburator is dirty inside in that case you need to remove the cover and remove the 2 screws. Mark your lines top and bottom them removed, now remove carefully the carburator be careful with the gasket remove the 4 Little screws and remove carefully the black Gasket spray carburator cleaner inside the holes and line tubes. Second remove the 1 Big screw on the other side of the carburator be carefull with the gasket spray carburator cleaner and do the step for installed

Apr 18, 2010 | Troy Bilt Tb70ss Gas Trimmer

3 Answers

My weed eater wont start.


One of the problem could be is you have one of the line in this case top line in the carburator clog. For clean the carburator You need to remove first the cover for the filter 2 screws on front of the carburator remove lines mark the lines top and bottom remove slowly the carburator be careful with the gasket. The carburator have 4 little screws removed and remove the black gasket (diaphragm) clean with carburator cleaner and air, blow air thru the top line tube, now on the otherside remove the screw and clean the gasket and the carburator inside do the same step. Make sure you clean the fuel filter inside the tank with carburator cleaner.

Apr 05, 2010 | Troy Bilt Tb70ss Gas Trimmer

1 Answer

4390 15kw, it will start but only run for 15-20sec. Cleaned and replaced air filter, good oil qty. It's a negative 10F, I have cleaned around the pressure regulators. Again, it starts just fine, does not...


remove the carburator sediment bowl just on the underside of the carburator and see how much sediment is in the bowl,if theres a lot you may need to flush out the carburatror to rid it of these contaminents,also pull out the choke part way when it wants to die,if this keeps it running,this also is an indication of a dirty carburator restricting fuel flow through carburator to the engine intake,sometimes if you can keep it running,spray some carburator cleaner into the throat opening of the carburator and see if this helps

Jan 02, 2010 | Electrical Supplies

1 Answer

Won't start


you have to performany of these:
1. open the sparkplug & clean it,or you can replace if it is not firing.
2.Clean the carburator,get a compresor or a manual air pump with pin (For ball) and triger directly to the tiny holes inside the carburator.
clean the gas filter becos it already might not flow the gas towards the carburator.

Nov 26, 2009 | Drills

1 Answer

Will not stay running


I cleaned the carburator on mine. That did the trick. Make sure you remove the bowl from underneath and clean the bolt. The bolt has holes in it that may be clogged. Clear it with a small wire. I then sprayed the carburator down with starting fluid. You may use carburator cleaner on the carburator, but I didn't I just used a brush.

Sep 27, 2009 | Oregon Scientific Gator Mulcher 3-N-1...

2 Answers

Will not start


If it has been in storage for some time it may have water in the fuel due to condensation in the tank, if so remove old fuel from tank and lines and refill with fresh fuel

May 01, 2009 | Garden

1 Answer

No power


Hi There,

If your car was running good and suddently it became like this and getting then I think your car either having a carburator or fuel injection problem. If it is a carburator I sugess go to shop for carburator cleaning and check for leakage, if it is a fuel injection then replaced fuel filter and one of the fuel injection cleaning stuff in gas tank for cleaning those fuel injection......

KK

Sep 14, 2008 | 1996 Suzuki Sidekick

Not finding what you are looking for?
2004 kawasaki KX 250 F Logo

Related Topics:

119 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...