Question about kawasaki ZZR 400 Motorcycles

1 Answer

The bike starts and idles perfect gives a smooth ride but after 6000rpm the bike lags and does not want to rev up, i can not get more than 100km on 6th gear it is really annoying me, through pull off right up to 6th gear it just does not want to perform, the bike has 15 000km and its been serviced every year by the agents and they can not tell me or do anything about it, it just got back from a service they cleaned the aif filter and did an oil change and welded the exhast and thats the best they could do even tho the bill was over R3000,00 please give me advise and a guided repair on how to fix this problem because i really do not want them to touch the bike again.thank you Neran

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 134 Answers

  1. if u need more fast .. then don't change air filter and otherthings except oil...
  2. remove the BORE and give that to bore service centre they adjust it ,how much speed you want, only in bore don't go beyond that...

Posted on Jan 01, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

WHY DOES MY BIKE NOT REV THROUGH 6000RPM


Manual free - 2005 Suzuki Address V100 '2005 ... - offou

www.offou.com/manual-free-2005-suzuki-address-v100-2005-suzuki-a...
Aug 21, 2015 - Question Product: 2005 Suzuki Address V100 Question Details: Manual free - 2005 Suzuki Address V100 View Answers Search Related.

Sep 25, 2015 | 2005 Suzuki Address V100

1 Answer

Engine revs while constant acceleration


some of the computer have a rev limiter built in and it would give you what you are writing about there my not be anything wrong

Apr 04, 2014 | 2001 Chevrolet Impala

1 Answer

Just bought a 1993 suzuki gsxr 750. has been sitting in a garage for 2 years. we took the carbs off and cleaned them really well, changed the oil, and air filter and we added new gas. bike starts up and...


If is runs better with full choke, then the bike is lean, check for air leaks at the carb manifold, vacumn cracked hoses, non standard exhausts, perhaps the mufflers have rusted out while sitting

Apr 24, 2011 | 1993 Suzuki GSX-R 750 WP

1 Answer

Hi I have a GSXR 750 K7, I did an oil and filter change plus needed a new battery. since starting the bike all running smoothly i noticed the revs running at 2000rpm plus f1 light. went for a short ride...


You might have a leak in your tube mount between the carb and head. Let the bike idle and spray some starting fluid on the front of the carb. If the idle shoots up, you have a leak. Either cracked/weatherd or not tight enough

Apr 18, 2011 | Suzuki GSX-R 750 F Motorcycles

1 Answer

Bike back fires at 6000RPM and has no power, only doing 55MPH at 6000RPM in 3rd gear


try playing with the choke a little bit. give it some choke, bout quarter on or less. if it smoothes out the carbs are probably dirty.

Apr 08, 2010 | 1990 kawasaki ZXR 750

1 Answer

Bought a 2004 klx125 and the bike starts very hard and won't idle. My son doesn't ride it as much as he would like to because of these problems. Are there changes I can make to the stock carb. that will...


hi mate just turn the idle screw in on the carb until it starts and runs smoothely dont screw it to much though it will rev right up else just do it a quarter turn each time until it eventually stays running good luck buddy

Mar 15, 2009 | 2004 kawasaki KLX 125

2 Answers

No power at low revs but works a treat at higher revs.


maybe its your carburetor it might need adjusting.

Jan 14, 2009 | 2000 Yamaha DT 125 R

1 Answer

Screaming sound


its quite normal for these bikes to scream at high revs its what they do at the high revs though it becomes more apparent with engine age and thrashing into the high revs maybe a good service is due hope this helps

Jan 14, 2009 | 1990 Honda CBR 250 RR

2 Answers

Rev limit light flashes when reved over 6000 rpm!


No, the rev limiter resets to 6000 rpms when the battery goes dead or is changed. You have to reprogram the rev limiter to allow it to rev to 11,500 or more, but i am sorry to say that i can't recall the sequencevof buttons to reset it, which shold be in your owners manual. This is not an upshift light!

Nov 20, 2008 | 1999 Aprilia RS 250

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

128 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...