Question about 2006 Yamaha V Star 1100 Classic

1 Answer

Won't start.Get a ckicking sound when starter button is engaged..light goes on, but no rumble to the engine at all. It's my first bike..don't even know where the battery is located..!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 22 Answers

#1 GET A GOOD SHOP MANUAL[The 30+dollars will save you a heck of a lot more as long as you own the bike #2 good chance the battery is low even though a battery will light a headlight it will not necessarily crank the starter..The clicking you hear is starter solenoid telling you this is the case so charge the battery.If the problem persists check the batteryat your local auto parts for a load test its usually free.The battery could be as old as the bike and life expectancy is at limits here.If the battery is ok check the solenoid [at end of the battery red heavy wire] I really think these are your two trouble makers..Hopefuuly a Happy New Year





















#1

Posted on Dec 31, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

GS550 Electrical Problems.


try carefully shorting a screw driver accross solenoid the two big nuts with ignition on . try a meter on continuity starter casing to earth

Jul 18, 2013 | 1980 Suzuki Gs 550 L

1 Answer

Bike won't start but has a tic tic tic sound


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty kickstand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, or solenoid faulty.
9. Main fuse or circuit breaker may be blown or faulty.
10. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
Re 2002 Star Custom Won Start Road Star Forum Yamaha Road Star
Bike won start ticking noise heard motorcycles
http://www.sloneservices.com/SilverBack/Other-Stuff/V-StarShopManual99-07.pdf
OEM parts for Yamaha
http://www.starmotorcycles.com/assets/service/manuals/2000/LIT-11626-13-36_96.pdf

Jul 02, 2012 | 2000 Yamaha V Star 1100 Classic

1 Answer

Bike would not start.


If you are hearing the clicking sound that means that your starter motor's relay is trying to engage. Probably you don't have enough juice in your battery. Charge your battery very good and give it a try again.If still nothing happens then you must take out the starter motor and have it repaired. That spinning sound also suggests to take a closer look to your starter motor and your starter clutch which is located behind the stator's rotor.

Feb 03, 2012 | 2007 kawasaki Vulcan 900 Classic

4 Answers

My 92 600 katana wont start. It wont even turn over, when i press the start nothing happens. the battery is good i charged it up and all the lights work but it still wont turn over.


If the clutch switch, the neutral safety switch, and the side stand switch are all working correctly, then test the starting system. When you push the starter button you should hear a click , so you know the button is working.Follow the positive battery cable to the starter solenoid. Disconnect the two wires that activate the solenoid, test the two wires from the harness make sure the needle on your voltage meter jumps when you push the starter button, this means the button is good. Take a wire and jump the two posts on the solenoid or touch the two cables together. If your starter works, then you need a new solenoid. If you hold the starter button and tap on the starter with a plastic hammer and the starter works you need new starter brushes. Anything else wrong with the starter and you need to replace the starter assembly , the manufacturer does not make replacement parts for the starter.

Jul 28, 2011 | 1992 Suzuki GSX 600 F (Katana)

1 Answer

The tranny on my 883xl will shift through the gears but it won't engage. It will go into neutral. I don't have to engage the clutch to get it to shift through but even with the clutch it wont...


Sounds like your final drive belt is broke. Put the transmission in low gear with the engine off and try pushing the bike. If you can push the bike with the transmission in gear and the belt is not broke, it could be the front belt pulley is stripped in splined area where it goes on the countershaft. to check that take the rear master cylinder loose and remove the front pulley cover. Put the transmission in low gear with the engine off and push the bike. If the front pulley turns and the countershaft does not, the pulley is stripped.

Good Luck
Steve

Jun 18, 2011 | 2004 Harley Davidson XL 883 Sportster

1 Answer

I have a 2006 Suzuki GS500F the bike ran fine and started fine for 2 weeks after i bought it used, and it started fine all day until the bike wouldn't even try to start. I thought the battery was dead so i...


Hi, I would still suspect the battery. Lights and ignition do not really draw much current neither does the bike when running.. Your battery goes almost flat when the starter is engaged lots of amps are required. Try this check: remove the battery (undo negative lead first please) then connect a high wattage bulb across the terminals see how long it takes for the bulb to dim. If the bulb is still bright after an hour re charge the battery (please use a dedicated bike charger max output 1 amp). Re-fit the battery (connect positive lead first please). If bike still does not start check starter solenoid is activating it should click when you press the start button. Hope this helps.

Feb 24, 2011 | 2006 Suzuki GS 500 F

1 Answer

Starter clicking noise, bike won't start


start relay should be checked, if cables are loose or corroded they do not deliver enough power.if jumping the start relay will engage the starter replace the relay.

Apr 29, 2010 | 2005 Honda VTX 1300 R

1 Answer

Fault with electric start on my Suzuki GSF 250 Bandit


Check that the clutch is in, kick stand up, and neutral light ablaze. Then try your start button. When you had it running and hit the button, the starter engaged at a slower speed then the bike engine was turning, which led to the stall. The stall means your starter works. If the starter works when the engine is running then it is wiring. Check your kick stand wiring along with the clutch wires which plug in on the handlle bar or where the clutch cable enters the engine.

Oct 18, 2009 | 1995 Suzuki GSF 250 Bandit

1 Answer

05 katana new bat new starter new relay still won,t start when I push the srart button when i push the starter button head light goes dim.


check these things: is the engine run/stop switch pressed? is the bike in gear? is your safety switch always depressed?

Apr 05, 2009 | 2006 Suzuki GSX 750 F (Katana)

Not finding what you are looking for?
2006 Yamaha V Star 1100 Classic Logo

208 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...