Question about Suzuki UH 125 Burgman Motorcycles

1 Answer

2010 LT 160 quadrunner sounded like it had an engine knock, drained oil and had iron filings in the oil, sent the bike to the shop where it was purchased from and report from mechanic states flywheel and key broken and automatic clutch broken due to driver negligence, is this in any way possible??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,909 Answers

I am no lawyer but they are internal parts so how can the driver be neglegent.

Contact the manufacturer straight away with the report and your findings. I am sure they will be interested enough to avoid a law suite!
Don't let them cover anything up and mention a law firm is interested in taking it up, which I am sure they will.

Posted on Dec 30, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Engine knock


Hi Anonymous, take a ride or drive over to your local dealers service department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary and offer professional advice and assistance concerning your issue. Have a nice day.

Jul 08, 2013 | Harley Davidson Motorcycles

1 Answer

Engine knocking


engine knocking sound like worn engine bearings or low oil level. if oil level okay more likely oil pump has failed or engine bearings worn out or engine oil diluted with antifreeze or gasoline causing viscosity oil to be too thin.if oil and filter been changed.if you see check engine light flashing code scan for faulty knock sensor. if you see low oil light flashing engine knocking damaged to engine done.

Oct 13, 2012 | 2006 Chrysler PT Cruiser

1 Answer

1995 toyota corolla knocking in motor after no oil


Somehow or another (missing or loosened oil pan drain bolt, excessive oil usage, etc), you lost oil and therefore, oil pressure. Running a car with little or no oil, even for a few seconds, most likely ruined your engine. The knocking sound means you probably threw a rod. Unfortuneately, the only fix is a major engine overhaul or a new engine. Sorry for the bad news.

Jul 15, 2012 | 1995 Toyota Corolla

1 Answer

Honda cmx250 rebel 7000miles engine noise what could it be??


Were you the original owner? How was the break in prosses? What kind of sound do you hear? If its a knocking sound try putting some Sea Foam in the oil. Run the bike for about 15-20 miles if the sound is starting to go away run it for a little longer untill the sound goes away but dont go over 50 miles. Then change you oil and oil filter. Your also due for for an service of the bike. So take it in to your shop and have them look it over making sure that if the bike didnt get broken in just right they can maybe set it right. If you dont want to do that i would deffanently try the Sea Foam they sell it at any auto parts store. Good luck feel free to email me
A.J. Weaver

Mar 29, 2012 | Motorcycles

1 Answer

Hi I wanted to adjust the clutch 883 of my iron, I opened the cards came out transmission oil, not having consulted the service manual I thought it was engine oil is doing to change that after closing the...


If your bike is a 2010 model, you can use the same oil in both areas, the engine and transmission. If you are in doubt, simply drain the oil in both places and put the correct amount and kind of oil back it. No Problem. Italian, I hope.

Lei non sbaglia dovrebbe causare alcun problema poiché il modella tardi le marche di Harley di motocycles usano lo stesso olio nel motore e la trasmissione. Se lei è riguardato, cambia semplicemente l'olio in entrambe le aree. Non credo che lei avrà alcun problema. Spero questi lavori di programma di traduzione.

Buono Steve di Fortuna

Jul 15, 2011 | 2010 Harley Davidson Sportster XL 883N...

1 Answer

The other day we heard a knocking sound whick sounds like it is coming from the enigine we checked the oil and it was low so we went ahead and did an oil change but when we start the car up still it is...


stacey_jo219, You dont state here where the sound is coming from. Does it sound like the top of the engine? If it is, then you could have a bad lifter or two. This usually happens when the engine is run with not enough oil in it. This sounds more like a ticking sound than a knock as you state here. This will sometimes go away with time when you have the proper oil level in the engine. If it doesn't then the affected lifters will have to be replaced which is hard to diagnose which ones are bad so they are usually all replaced. If the sounds like it is from the bottom of the engine (this is more like a knocking sound) then it is usually a bad bearing on the crankshaft and the engine will have to be replaced. This is cheaper than rebuilding the engine. These are just two possibilities of what your problem could be. If you wish, resubmit your question and try to be more specific about where exactly the sound is coming from. Good luck with this.

May 22, 2011 | Mitsubishi Montero Sport Cars & Trucks

1 Answer

My '94 Suzuki Intruder 800 returned from bike shop where they changed battery. on my first ride noticed that it;s loosing power and noticed that there is no oil in. have put 3 1/2 q of 10W-40 synthetic...


>>> Please leave feedback so I can continue helping You & Others
Hi,

You made a mistake sorry, should have not put oil in. Take it straight back to shop, ask them on phone what type of oil they put in, say you want it in writing. Don't tell them why yet. Then, with a witness, drain some oil as a sample, get witness to keep it. Then take bike to shop and tell them what happened. Drain oil sample at shop to compare, if they don't rebuild your motor, tell them you have a sample to take to analyst etc etc.

Thanks,

Adam.

Feb 19, 2011 | 1994 Suzuki VS 800 Intruder

1 Answer

Knocking in 1150gs engine, When riding loud knocking happened,returned staright away. Re-set valve clearances and did an oil change, saw some iron filings in oil. Took off r/h head and all looked OK....


take out con rods and check big ends i gess there now burt out though, if the oil pump packed up when you were riding it and you kept riding it its now a full engine rebuild, i gess this is were the iron filings come from or its from a piston tearing up and the rings have been ground up and forsed into the sump eather way its a big job now

Dec 06, 2009 | 2002 BMW R 1150 GS Adventure

3 Answers

Have a 1990 Z71 4wd that with loud engine knock.


I'd consider some fresh, clean oil & filter change first of all, if it hasn't been done . drive it for a while providing it isn't too bad, & see if it goes away, if not get back to us.

May 18, 2009 | 1990 Chevrolet C1500

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

139 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75797 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...