Question about KTM 505 SX-F Motorcycles

Open Question

I need a wiring diagram for a polaris predator 500 2003-2005 for the ignition switch. there is 6 wires and only 4 plugs that connect to a plug that connects to the ignition switch. need to know which ones to put together...ie. which colors your site did not have mt make and model where it says to enter it. but it is the polaris predator 500

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Wiring diagram for Altec Lansing Vs4221 Right Speaker Wire

red-positive . blue-negative and if another colour mostly brown-Earth.

Posted on Jan 17, 2008

robshow
  • 367 Answers

SOURCE: kia optima 2004 transmission selector wiring colour diagram

Try this website www.kiatechinfo.com

This will be far more usefull than me just handing you the diagram

Posted on Jan 19, 2009

michigan man
  • 3533 Answers

SOURCE: wiring diagram Ignition switch

try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 20, 2009

tabbycat282
  • 56 Answers

SOURCE: trying to connect the wires to a 95 ktm lc4 620

This is for a 2000 400/640 ignition for KTM 640 lc4-e. Looking from the perspective of rider seated on motorcycle we have the following colour coded wires going from left to right.: 1. r/w (red/white) 2. bl (blue) 3. o (orange) 4. g (green) 5. ge (Yellow) .6 g/s. (green/black). Hope this can steer you in the right direction Brisenod. From Flabbycat

Posted on Apr 16, 2009

jmgldsmth
  • 1869 Answers

SOURCE: 1980-gl1100-honda goldwing-no spark at plugs-

using a meter check your engine to frame ground
your testlight is completing the missing ground wire connection; allowing the spark to jump to ground

Posted on Jun 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a wiring or instalation diagram for 03 silverado


Download manual from the attached link: https://www.gmupfitter.com/publicat/2004_BB/2003_Beyond_LD_Electric_CK.pdf
http://alarmsellout.com/support/diagrams/vehicle/CHEVROLET%20SILVERADO%201988-2005.pdf

This may help:
http://www.automotivetroubleshootingsecrets.com/2003_Chevrolet_Silverado_1500_4.8L_No_Start_Stall.html

This may help:
2003-2006 Chevrolet Silverado Wiring Diagram:
Listed below is the vehicle specific wiring diagram for your car alarm, remote starter or keyless entry installation into your 2003-2006 Chevrolet Silverado . This information outlines the wires location, color and polarity to help you identify the proper connection spots in the vehicle. Please be sure to test all of your wires with a digital multimeter before making any connections.

PART COLOR LOCATION 12 VOLT CONSTANT RED (+) @ IGNITION SWITCH HARNESS STARTER YELLOW (+) @ IGNITION SWITCH HARNESS STARTER 2 N/A IGNITION 1 PINK (+) @ IGNITION SWITCH HARNESS IGNITION 2 WHITE (+), SEE NOTE #2 @ IGNITION SWITCH HARNESS IGNITION 3 N/A ACCESSORY/HEATER BLOWER 1 ORANGE (+) @ IGNITION SWITCH HARNESS ACCESSORY/HEATER BLOWER 2 BROWN (+) @ IGNITION SWITCH HARNESS KEYSENSE N/A PARKING LIGHTS ( - ) GRAY/BLACK (-) @ BCM, BROWN PLUG, PIN B2, SEE NOTE #3 PARKING LIGHTS ( + ) BROWN (+) IN DRIVERS KICK PANEL POWER LOCK SEE NOTE #1, (for BASE MODEL TRUCKS, SEE NOTE #4) POWER UNLOCK SEE NOTE #1, (for BASE MODEL TRUCKS SEE NOTE #4) DOOR TRIGGER GRAY/BLACK (-)(DRIVERS) and BLACK/WHITE (-)(PASSENGER), SEE NOTE #5 @ EACH DOOR MODULE, IN EACH DOOR DOMELIGHT SUPERVISION GRAY/BLACK (-) @ BCM, BLACK PLUG, PIN E, SEE NOTE #3 TRUNK RELEASE N/A SLIDING POWER DOOR N/A HORN BLACK/YELLOW to BLACK (-) @ STEERING COLUMN HARNESS TACH Any wire NOT, PINK, BLACK or BROWN (AC) @ IGNITION COILS or FUEL-INJECTORS WAIT TO START LIGHT DK. BLUE (-) @ INSTRUMENT CLUSTER, PIN A2 BRAKE WHITE (+) @ BRAKE PEDAL SWITCH FACTORY ALARM DISARM LT. GREEN (-) @ DRIVERS DOOR MODULE, IN DOOR, BLACK 26-PIN PLUG PIN 15 ANTI-THEFT GM'S PASSLOCK 2 ANTI-THEFT SYSTEM, SEE NOTE #1 @ IGNITION SWITCH EXTRA INFORMATION NOTE #1: This vehicle uses GM'S PASSLOCK 2 ANTI-THEFT SYSTEM that requires a 791 Bypass Module to Remote Start, if you are using a REMOTE STARTER ONLY, use the 791. IF you are installing a REMOTE STARTER with KEYLESS ENTRY you MUST USE the INTERFACE BYPASS MODULE, Part # DB-ALL or XK09, EITHER Bypass will do the Anti-theft and Keyless entry. If connecting a keyless entry only you can use the GMDL-BP. NOTE #2: The IGNITION #2 wire WHITE must be connected to prevent a CHECK ENGINE LIGHT from turning on and to prevent DAMAGE to the TRANSMISSION on this Vehicle. NOTE #3; The BCM is located under the Drivers Side of the dash, the BCM has 6 plugs on it, with the PURPLE plug on the back. NOTE #4: On BASE model truck the DOOR LOCK INTERFACE MODULE is not necessary, the LOCK wire is a LT BLUE (TYPE B) @ the BCM, LT BLUE PLUG, PIN B5, and the UNLOCK wire is a WHITE (TYPE B) @ the BCM, LT BLUE PLUG, PIN B10. NOTE #5: On BASE Model trucks, the Door Trigger wires are @ the BCM, LT BLUE PLUG, PINS B4 and A5. On 4-Door Trucks the LEFT REAR Door is a LT BLUE/BLACK (-) PIN A3 and the RIGHT REAR Door is a LT GREEN/BLACK (-) PIN A2, located in a PURPLE PLUG at the BCM, use all 4 wires and diode isolate when installing an alarm system.
03 silverado wiring diagram-dfydxumns33ohqc3bsmt22yf-2-1.jpg

2011-03-23_212446_1-dfydxumns33ohqc3bsmt22yf-2-4.gif

2011-03-28_044351_brakes_lamps_circuit_2003_2500_siverado-dfydxumns33ohqc3bsmt22yf-2-8.gif

2012-06-07_153513_starter1-dfydxumns33ohqc3bsmt22yf-2-13.gif

chevroletsilveradohorncircuit_thumb-dfydxumns33ohqc3bsmt22yf-2-19.jpg

chevrolet-silverado-wiring-diagram-wire-diagram-dfydxumns33ohqc3bsmt22yf-2-26.png

collection-fuel-2003-chevy-silverado-wiring-diagram-estimation-information-standard-work-therefore-straight-swapped-dfydxumns33ohqc3bsmt22yf-2-34.jpg

drivers2-dfydxumns33ohqc3bsmt22yf-2-43.jpg

igniton-black-2003-chevy-silverado-wiring-diagram-neutral-before-position-begin-switch-know-scheme-unsure-pairs-dfydxumns33ohqc3bsmt22yf-2-53.png

passen2-dfydxumns33ohqc3bsmt22yf-2-64.jpg

sensor-primary-2003-chevy-silverado-wiring-diagram-fuel-pump-plugs-solid-conductors-important-looking-more-channels-dfydxumns33ohqc3bsmt22yf-2-76.png

2011-03-07_083537_3-7-2011_12-28-24_am-dfydxumns33ohqc3bsmt22yf-2-89.png

2011-03-23_212446_1-dfydxumns33ohqc3bsmt22yf-2-103.gif

2011-05-14_175028_2003_stop_lamps-dfydxumns33ohqc3bsmt22yf-2-118.gif

2012-06-07_153513_starter1-dfydxumns33ohqc3bsmt22yf-2-134.gif

igniton-black-2003-chevy-silverado-wiring-diagram-neutral-before-position-begin-switch-know-scheme-unsure-pairs-dfydxumns33ohqc3bsmt22yf-2-151.png

Apr 16, 2017 | Cars & Trucks

1 Answer

Brake light stays on


Leslie, Check rear brake connection, pull down on the rear spring to turn the brake light on and off..repeat until it gets worked out..you can spray some light oil/WD40 on it to help clean it out. Could also be a faulty switch, which will need replaced. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

ATV Connection
polaris predator 50 brake wiring diagram Google Search
http://pi54.com/corp/manuals/Parts/9918787.pdf

Apr 27, 2016 | Polaris 2006 Predator 50

1 Answer

I have a 2003 Predator 500 put all new electrical parts on it there is no kill switch on it and it's not getting spark


Hi, Chris and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose.
6. Faulty ignition coil or ignition / electronic module
7. Faulty CKP, CMP, or BAS sensor.
8. Faulty ignition switch.
9. Tilt sensor needs a reset.
10. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
predator 500 no spark Polaris ATV Forum
ATV Connection
03 Predator no spark Polaris Pro Riders
https://www.tradebit.com/filedetail.php/278862898-2003-atv-polaris-predator-500-workshop-service

Apr 18, 2016 | Motorcycles

1 Answer

My predator 500 los park it will spit a spark and then quit could it be my CDI box


Hi, Chris it may very well be your CDI otherwise the usual suspects are:
1. Fouled spark plugs.
2. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
3. Loose connection at ignition coil or plug between ignition sensor and module.
4. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose.
5. Faulty ignition coil or ignition / electronic module
6. Failed CKP, CMP, or BAS sensor.
7. Faulty ignition switch.
8. Security alarm failing to disarm needs reset
For more information about your issue and free downloads that you will need please visit the websites below. Good luck and have a nice day.
predator 500 no spark Polaris ATV Forum
ATV Connection
https://www.tradebit.com/filesharing.php/search/0/polaris+predator+500

Jan 24, 2016 | Motorcycles

1 Answer

Very little spark


bad plug? bad plug wire boot ? dirty pickup coils inside eng.. bad grnd @ coil ? loose wiring ? bad wiring ?start w/these and you will prolly find dirty or loose @ 1 of the above. check plug gap?

Jul 12, 2014 | Polaris 2005 Predator 90

2 Answers

Spark plug wire diagram for 2005 mazda 6


2.3L 4 cylinder? After removing the plastic engine cover, look at the top of the ignition coil.

changesparkplugs003.jpg
It should be numbered 1 through 4.

This is plug number 1 on the engine:

changesparkplugs004.jpg
Just wire them 1, 2, 3 and 4 to the corresponding numbers on the ignition coil.

best wishes

Jan 01, 2011 | Mazda MAZDA6 Cars & Trucks

4 Answers

My 1999 polaris explorer will not go into 4 wheel drive. The speedometer also does not work. I am told that it wil not go into 4 wheel drive if the speedo does not work. If this is the case can I bypass...


If your speedometer is broken then your AWD will not work. You can do 2 things

1. Replace the Speedometer
2. Remove the 6 pin plug from your speedometer
On the plug, short the brown/Brown White wires together and
tape it up good.
Do not reconnect the plug.
You will lose the function of the speedometer but your AWD will work.

Oct 30, 2009 | Polaris ATV

1 Answer

I broke a bunch of the wires on the wiring harness


You need to get yourself a shop manual and rewire the harness in accordance with the wiring diagram in that manual. I bet if you look online you can download it for free like I did.

Oct 02, 2009 | Polaris ATV

1 Answer

I need the diagram to put the spark plug cables


2003 Chevrolet Malibu 3.1L SFI OHV 6cyl
Spark Plug Wires - Removal & Installation

3.5L Engine
  1. Before servicing the vehicle, refer to the Precautions Section.
    NOTE Twist the spark plug boot one-half turn in order to release the boot. Pull on the spark plug boot only. Do not pull on the spark plug wire or the wire could be damaged.
  2. Remove the intake manifold cover, if required.
  3. Disconnect the left side spark plug wires from the spark plugs.
  4. Disconnect the left side spark plug wires from the ignition coil.
  5. Remove the spark plug wire clips from the Manifold Absolute Pressure (MAP) sensor bracket and the heater inlet and outlet pipe tab.
  6. Remove the spark plug wire assembly.
  7. If replacing only one plug wire, open the retaining clips and remove the appropriate spark plug wire.
  8. Disconnect the right side spark plug wires from the spark plugs.
  9. Disconnect the right side spark plugs from the ignition coils.
  10. Remove the spark plug wire assembly.
  11. If replacing only one plug wire, open the retaining clip and remove the appropriate spark plug wire.
To install:
  1. Install the spark plug wire assembly.
  2. Connect the right side spark plugs to the ignition coils.
  3. Connect the right side spark plug wires to the spark plugs.
  4. If replacing only one plug wire, open the retaining clip and install the appropriate spark plug wire.
  5. Install the spark plug wire assembly.
  6. Connect the left side spark plug wires to the spark plugs.
  7. Connect the left side spark plug wires to the ignition coil.
  8. Install the spark plug wire clips to the MAP sensor bracket and the heater inlet and outlet pipe tab.
  9. If replacing only one plug wire, open the retaining clips and install the appropriate spark plug wire.
  10. Install the intake manifold cover, if required.

Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
74d742b.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
306b531.jpg


Fig. 3.5L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
9313fa7.jpg


Fig. 2.4L Engine Firing order: 1-3-4-2 Distributorless ignition system
2c9af72.jpg


Fig. 3.1L Engine Firing order: 1-2-3-4-5-6 Distributorless ignition system
d929c16.jpg


Fig. 2.2L Engine Firing Order: 1-3-4-2 Distributorless ignition system
f357cd3.jpg

Fig. 3.5L & 3.9L Engines Firing order: 1-2-3-4-5-6 Distributorless ignition system
09e9db9.jpg

I really hope help you with this (remember rated this help) Good luck.

Sep 23, 2009 | 2003 Chevrolet Malibu

1 Answer

Ignition wiring


firingorder6a.gif firingorder6.gif 1991-1994 2.9L and 3.0L Engines Firing Order 1-4-2-5-3-6 1995 And Later 3.0L V-6 With DIS Ignition System Firing Order 1-4-2-5-3-6
4.0L Engines Firing Order: 1-4-2-5-3-6 DIS Ignition System

Nov 22, 2008 | 1995 Ford Ranger Supercab

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

452 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...