Question about 2005 Honda VT 1100 C Shadow Spirit

1 Answer

85 VT1100, no power to start switch. I think I've checked/bypass all safety switches. Tried different start switch. Fuses all check out. Any advise on where to go from here or a wire diagram would be great! Thanks for your time...

Posted by Anonymous on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

Have you tried the side stand cut out switch? its a commonly missed one. if not heres a link to the wiring diagram. hope it helps
cheers

http://circuitwiringdiagram.com/2010/03/1985-1995-honda-shadow-vt1100-electrical-wiring-diagram/

Posted on Jan 05, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My raypak 106A analog pool heater stopped working. There is usually a clicking sound when the water pressure switch activates.


Chances are when you bypass the switch the machine knows it's not there, therefore safety kicks in. Check continuity through all your safety switches. Good Luck.

Apr 23, 2017 | Heating & Cooling

1 Answer

98 grand prix won't start battery good tried jump start nothing removed glove box relay clicking ? checked fuses under hood in fuss box all good will not turn over clicking noise from relay...


Better check with a test light for power to the small wire that goes to the starter from the key switch. If no power need to check for a neutral safety switch or fuse. Or the starter you got is bad. Alternator will not cause not to crank over

Aug 03, 2013 | 1998 Pontiac Grand Prix

3 Answers

Brake Lights don't work on the back of our 2003 Ford Windstar


Did you actually check the brake light switch for power in and out ?
There are two different fuses, one for each side. And the circuit includes the turn signal switch.
The third brake light bypasses the turn signals.

Mar 01, 2013 | 2003 Ford Windstar

1 Answer

I have a 2001 chevy suburban that has no power to the pressure switch for the a/c. i've checked fuses and relays nothing. I also tried a different control head also. thanks


this control is controlled by the computer. make sure your a/c relay is good along with fuses. check the high pressure switch connection on back of compressor it may need to be put on a tech 2

Jun 28, 2012 | 2001 Chevrolet Silverado 1500

3 Answers

85' chevy manual truck ignition issues. won't start. i think its in the collumn somewhere. new keyswitch, starter,alternator, battery and cable ends.


When you say it won't start I assume you mean it will not turn over. Have you replaced the ignition switch? Not the key tumbler but the ignition switch. Have you checked the clutch safety switch?

Oct 02, 2011 | 1985 Chevrolet Chevy

1 Answer

Have a 05 shadow aero vt750 that will not turn over the battery is good but when the key is turned on and start button pushed there is absolutely no sound at all. tried a brand new battery with same...


Check the clutch safety switch and the neutral safety switch.
If the bike thinks the clutch is not in, or that the engine is not in neutral, you will get no click from the solenoid.
You can try bypassing the safeties to see if that is the issue too.
Get an ohm meter and measure resistance to ground on the solenoid inputs.
One will read dead short (ground) and the other will read ... well.... something else.
the other lead is the positive.
Make sure you are measuring on the skinny leads on the solenoid and not the thick ones.
Now run a shunt wire from the positive of the battery to the positive of the starter solenoid.
It should click and the engine should turn over.
If it doesn't click, or if when you measured the leads, one was 0 ohms and the other lead was totally open, then you probably need to replace the solenoid.
If it clicks and turns over, and the switches are good, start checking your fuses with the ohm meter.
You may actually even want to check the fuses first.

Apr 24, 2011 | 2005 Honda VT 750 Shadow Aero

1 Answer

I tried 2 start mt 2005 toyota camry & i,ve got full power & when i tried 2 start it it just wouldn't do anything @ all. The battery is fully charged, everything comes on but headlights, dash...


Check the user manual for the kill switch location. At times, these models are equipped with a removable key that will cause the same problem.

Jan 08, 2011 | 2005 Toyota Corolla

2 Answers

Riding lawnmower will not start with key. I tried a new key switch and a new solenoid. I checked all safety switches and they checked out OK. I don't know if the wires for the solenoid are hooked up...


Depend on the make and model of the mower....the safety switches usually are the seat, pto, shift lever, brake and clutch. If any of these are bad...the switch won't work. Can you cross the starter and have it start? With these safety switches....you can't just disconnect them to bypass. Most require a loop and running a wire from one side of the switch to the other will usually help you find the one causing the issue.

The solenoid comes in about 4 different models. Some ground to the frame and some don't. Not all key switches are the same either...we stock over 25 different switches and I could show you 7 that look identical but are different.

Personally I would start testing from the starter and work my way back...starter, solenoid, safety switches, starter switch. www.nnyparts.com

May 30, 2010 | Craftsman 42 in. Deck 19.5hp Lawn Tractor

3 Answers

My 1997 dodge caravan won't start. has no power to starter wire or to engine. battery ok stater ok switch ok fuses and relays ok


there is an interrupt switch, called neutral safety switch. When it fails or goes out of adjustment, no start, and essentially no protest or indication. Try foot on brake, shift to neutral, turn key to start and slowly move shifter out of nuetral in each direction. If starter actuates, look into switch adjustment.

Sep 06, 2009 | 1998 Dodge Caravan

Not finding what you are looking for?
2005 Honda VT 1100 C Shadow Spirit Logo

546 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75822 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...