Question about 2003 Harley Davidson FLHRCI Road King Classic

2 Answers

Whats the voltage on a 2003 roadking battery - 2003 Harley Davidson FLHRCI Road King Classic

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 298 Answers

Hi and welcome to fixya,

The voltage on a 2003 roadking battery is 12volts nominal. 13.8 volts DC on charge. 10 amps.

Hope this info helps

Posted on Dec 29, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Will it start with 10 - 11 volts?

Posted on Apr 22, 2011

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Rear fender off 2000 roadking fit a 2003 roadking


Hi Anonymous, my guess is probably with minor modifications if any maybe. The 03 fender would fit a 01 and 02. The 2000 would fit a 99 Good luck

Apr 03, 2014 | 2000 Harley Davidson FLHR-FLHRI Road king

1 Answer

2003 harley davidson roadking, no spark...checked coil, ecm, crankshaft sensor..all checks out okay..can a bad oil pump cause no spark...?


Hi Anonymous, on twin cams the CKP sensor needs compression to send correct signal to the ICM/ECM, make sure both spark plugs are in heads and use a grounded third plug to check for spark or hold spark plug cable close to spark plug in head. If still not getting spark the usual suspects are:
1. Fouled spark plugs.
2. Battery voltage below 8.7 volts, loose or broken battery cables especially ground cable to frame.
3. Loose connection at ignition coil or plug between ignition sensor and module.
4. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose.
5. Faulty ignition coil or ignition / electronic module
6. Failed CKP, CMP, MAP or BAS sensor.
7. Faulty ignition switch.
For a prime suspect please visit the website below and good luck.
Big Twin Carb EFI DTC Intructions codes Harley Davidson Forums Harley...

Feb 03, 2013 | Harley Davidson FLHRCI Road King Classic...

1 Answer

My 2003 roadking just stopped running and the oil light is on. Can you tell me why it might be on? I've been riding for about half an hour and am now pulled over on the side of the road.


Did the oil light come on while the engine was still running? Do you have power to the rest of the bike? If not, have you checked the battery cables yet to be sure that they are tight? Is the "RUN" switch in the RUN position? Is it carburetted or fuel injected?

Nov 04, 2010 | 2003 Harley Davidson FLHR Road king

1 Answer

How do you take the wiring off for a tach on a 2003 harley roadking


How much wiring and just from the tach or off into the harnesses?

Sep 15, 2010 | 2003 Harley Davidson FLHR Road king

1 Answer

Electronic clicking...won't start...??..


Dead/low battery, system won't engage the starter because there isn't enough voltage

May 04, 2010 | 2003 Ducati 749

1 Answer

03 ford focus no fire


Check that you have a good engine ground and that all battery connections are clean and tight. If you are not getting fire and the coil is good, then I would suspect a faulty crankshaft position sensor. Hope this helped and best wishes.

Aug 10, 2009 | 2003 Ford Focus

1 Answer

Ford Explorer 2003 shift motor


there is a module behind the glove box try unplugging it and reconnect it if that doesn't work it might need a new module

Nov 21, 2008 | 2003 Ford Explorer

Not finding what you are looking for?
2003 Harley Davidson FLHRCI Road King Classic Logo

Related Topics:

266 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...