Question about Harley Davidson XL Sportster 883 Motorcycles

1 Answer

I have a 2000.harleydavidsonsportster and i need to rewire the hole thing.were do i start

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

You start by making a rough drawing of how the wiring looms are routed along the frame of the bike. Do the wires go under or over this tube? That's the question you'll be asking yourself when you get started with the wiring. If you go over the tube only to find that the seat is going to be resting right on the bundle, you'll have to unwire everything to reroute the wires under the tube.

The next thing is to order the new high quality wiring harness and get a schematic. Make sure you know how to read an electrical schematic.

Good Luck
Steve

Posted on Dec 29, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I got a 1990 ranger 2.3lt 2wd. that had been sitting i tried starting it but wouldn't catch, finally someone rewired the solenoid but now it keeps blowing fuses usually the fuel fuse.


Take it to a ASE certified repair shop . No one on here is going to know with out looking at it , How do we know what was rewired an how they did it, who rewired it ? You don't mess with things if your not sure what an how they work ! . It blows fuse # 1 in the power distribution box ? This is the fuel pump fuse ! What solenoid ? or do you mean a relay ? fuel pump relay ?

Jun 16, 2015 | Ford Ranger Cars & Trucks

2 Answers

I have a 2000 kia sportage that cranks but will not start what might it be?


When en engine won't start, there could be a number of things wrong. An engine requires air, fuel, and spark to start. You need to start by checking for spark. Take out one of the spark plugs and plug it back into the wire. Have somebody else turn the key while you hold the plug up to something metal on the engine, right next to the spark plug hole will be fine. You should see a bright blue spark, if you don't then you probably need to replace the spark plugs. You can do this same thing with any of the spark plugs. If you don't have spark on any of the plugs, get back with me and we'll go from there.

Jun 22, 2011 | 2000 Kia Sportage

1 Answer

I am having issues with the kay pass. sometimes it doesn't start until I move the steering wheel or tilt the steering wheel. then when it doesn't start a wait a few minutes and use the other ignition key...


sounds more like a bad key u said when u use the one key it starts. Use that key all the time if u still have problems then u probley need a new lock cylinder as far as eliminate system being as this is a anti theft system they make close to impossible to eliminate not to say it cant be done but take alot of rewiring and to pay a mecanic to rewire it for you will cost more than the defective part

Jun 11, 2010 | 1997 Chevrolet Lumina

1 Answer

Diagram for spark plug rewire sequence


i have a complete Chrysler workshop manual in pdf if you want..
b536f61.jpg

Nov 11, 2009 | 2000 Dodge Caravan

1 Answer

I have a 2000 Buick Lesabre inwhich my blinkers aren't working Could this be due to when they rewired my drivers door after the wires were cut


if its a mirror blinker yes,, if its on the car front and back only on one side, the rewire was a bad one and only one side of the car is not working,, ie the side that was rewired its likley they missed it out, if both sides are out try changing the flasher relay first

Nov 05, 2009 | 2001 Audi A4

1 Answer

Rewireing 93 harley davidson FXLR to 96 Handle bar


On the handlebar switches, Harley hasn't changed the color code scheme very much over the years but you really need a good schematic to know exactly how they are wired up. If you can find either a Harley service manual for a 96 model or a Clymer's manual, it would be helpful. I have a schmatic for a 94 FXDWG that should be alright for your 93 FXR but you need a schmatic for a 96 model bike.

Oct 07, 2009 | 2000 Harley Davidson FXD Dyna Super Glide

4 Answers

My check engine light is on and flashing & my car is shaking bad!


sound like you need a tune up the light flashing is a misfire take it to autozone and have the codes read

Jun 11, 2009 | 2001 Nissan Sentra

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

110 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...