Solution: Install the print head and ink tanks correctly iP3000 / i560
Seat the print head
Below is the procedure for seating the print head and ink tanks:
Note: Gently open the paper output tray while holding it.
Note: If the top cover is left open for more than 10 minutes, the print head holder will move to the right. If this occurs, close the top cover once and then re-open it.
<1> Electrical Contacts and Print Head Face's Nozzle Area
<2> Ink Supply Filters
Note: To avoid any damage, do not touch the print head face's nozzle area, electrical contacts, and ink supply filters. After removing the protective cap, set the print head into the print head holder immediately. Do not re-attach the protective cap after it has been removed.
Next, install the ink tanks.
Note: Remove the orange tape completely. If the orange tape is not completemy canon pixma ip1300 is - set_print_head_5.jpgnterfere with printing.
<1> Removed correctly
<2> Removed incorrectly
Note: Remove the protective cap whmy canon pixma ip1300 is - set_print_head_6.jpghat fingers will not be stained by the ink.
my canon pixma ip1300 is - ip3000_tank_seat_correct.jpgnk tank is installed in the correct position:
Properly installed:
my canon pixma ip1300 is - ip3000_tank_seat_wrong.jpgmages/ip3000_tank_seat_correct.jpg" alt="ip3000_tank_seat_correct.jpg" class="h_mi" />
Improperly installed:
<Left Image> The M ink tank is not fully seated.
<Right Image> All ink tanks are not fully seated.
574 views
Usually answered in minutes!
×