I was working on a 400 kodiak and found that the wire bundle under the battery bracket was chaffed and shorting out and blowing fuses and running battery down the wire went to my cdi
The most common reason on ATVs with no spark is the pickup coil in the stator. There are test for the ignition system and if you will give me your email I will send you the procedure as decribed in the manual. I cant copy teh images to this format but can through email..
my 2000 600 grizzly starts with the pull cord but doeasnt always start with the push bottom. i replaced the starter and ran new ground lines. some times it will start and some times it wont, i push the botton and its either dead or it makes a noise like the battery is low. any ideas.
Check the switch look particularly at the wires that contact the button. They may be corrided or cracked and only making contact every now and then.
i was working on a 400 kodiak and found that the wire bundle under the battery bracket was chaffed and shorting out and blowing fuses and running battery down
My 2002 Yamaha Kodak 400 has gone through three coils. Could that be wiring short, too?
×
2,737 views
Usually answered in minutes!
no power at 90s model yamaha grizzly coil
×