Question about Suzuki Rg 400 Motorcycles

3 Answers

My 2005 Suzuki Eiger 4x4 ATV will shift into neutral, but it does not detect that it is in neutral, and will not start. The neutral light is not on, and I cannot start it with the electric start or manual start. Is there a sensor that tells the bike that it is in neutral that could need changed?

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 8,909 Answers

There is a slip ring type of switch within the gearbox housing that lets the ignition produce a spark.
Not the easiest thing to fix but a broken wire maybe the problem if you have no gear indication either.
Hope this helps.

Posted on Nov 15, 2010

  • specialistel Dec 12, 2010

    The engine will not start unless it is in neutral. Similar to automatic gearbox vehicles.
    Trace the wire from the starter relay back to the gearbox, you may find a break or faulty switch. More likely a break in the cable at a tight corner in the loom.
    Hope this helps.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My suzuki has same problem all my fuses wer blown dont know or why plz help

Posted on Jan 21, 2012

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 19 Answers

I have the same problem did you ever fix it? what was the issue? adamfrontuto@gmail.com

Posted on Dec 11, 2010

  • jenny elaine Dec 11, 2010

    did you ever fix it? what was the issue. I have the same problem. adamfrontuto at gmail.com thanks

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Suzuki eiger starter button doesn't do anything


Hey Brad
With the info you have provided, it seems to point to the ignition switch as the problem. (the clicking you should hear comes from the solenoid contacts - not the starter button). There is probably one wire in the switch that has broken or come unsoldered or other wise not making the right connection.

Jun 12, 2017 | Suzuki 2004 Eiger 400 4X4 Manual

1 Answer

How to change antifreeze in 2005 suzuki eiger 400 and refill the antifreeze


Hey Perry, there should be a drain plug near the bottom of the water pump hsg.. just look carefully .. the drain will be at or near the lowest point of the coolant system.

Nov 10, 2016 | Suzuki 2005 Eiger Automatic 400 4X4

1 Answer

My 2007 Suzuki eiger quadrunner 4004 4x4 won't go into reverse.


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
4x4 LT250 Quadrunner wont shift Suzuki ATV Forum

Aug 05, 2015 | Suzuki Motorcycles

1 Answer

I got a 2005 Suzuki eiger 400 I was riding and a


its bent, stripped or broke the gears inside. not an easy repair.

Oct 12, 2014 | Suzuki 2005 Eiger Automatic 400 4X4

1 Answer

How to change the oil on Suzuki ATV Eiger 400


here is a link showing oil change proceedure https://www.youtube.com/watch?v=WbvPG0ow3aw

Oct 09, 2014 | Suzuki 2006 Eiger Automatic 400 4X4...

1 Answer

Where do the vaccum lines on atv 400 eiger suzuki gooff the carb.


The vacuum line goes to the smaller of the two fittings on the fuel petcock. Suzuki used a vacuum controlled auto shut off mechanism in many of their fuel petcocks.

Oct 06, 2014 | Suzuki 2006 Eiger Automatic 400 4X4...

1 Answer

Eiger problems suzuki


Make sure you didn't accidentally move the Run/Stop switch to the Stop position!

May 18, 2013 | Suzuki 2005 Eiger Automatic 400 4X4...

1 Answer

Atv will not start.i have checked all the fuses and inspected wiring harness.all the connections are in tact.could the relay be the problem?


I assume you mean it wont crank with the starter? It could be the solenoid, the neutral sensor, kill switch or the key switch.

May 18, 2013 | Suzuki 2005 Eiger Automatic 400 4X4...

2 Answers

My 2007 suzuki Eiger 400 4X4 will not move when shifted into gear forward or reverse


if its a CVT the belt might be broke or worn. If a manual then it could be the centrifugal clutches

Apr 14, 2013 | Suzuki 2007 Eiger 400 4X4 Semi-Automatic...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

1,007 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Ed Nelson
Ed Nelson

Level 2 Expert

149 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...