Question about 2007 Aprilia Pegaso 650

1 Answer

All my electrics went down on my strada 05 plate, rev counter resets itself and the immobiliser light flashes but the digital screen does not show any signs of life, has it broken?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Insert the key in the ignition switch, switch on as if to start the bike. Pull the wire up and down that comes out of the bottom of the ignition switch. The pegaso's engine vibration tends to dis the solder joint inside the ignition switch. resoldering it doesn't solve the issue. Those units are expensive and I bypassed mine with a toggle switch. Be sure to install it out of the rain. They cannot start the bike without the coded ignition key, but the can open the tank cover and steal your fuel or throw something in it, so beware.

Posted on Jan 12, 2014

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 2 Answers

SOURCE: how can I reset the service light on my aprilia pegaso strada.

DIAGNOSIS
This menu interfaces with the systems fitted to the
motorcycle to carry out diagnosis. To enable the menu, a
password is needed that is available only to aprilia service
centres.
• Insert the service code
It is a 5 digit code, for Pegaso the code is: 25973
If code is wrong, appears the message:
• Incorrect code
The instrument panel goes back to main menu; if not, the
menu appears:
• EXIT
• ECU ACTUATIONS
• ECU PARAMETERS
• ECU ERRORS
• DASHBOARD ERRORS
• DELETE ERRORS
• SERVICE RESET
• DISCONNECT
• UPDATE
• UPDATE KEYS
• KM / MILES
Once the operation is over, the instrument panel goes back
to main menu.

Posted on Jul 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Egine light flashes rev counter went haywire then stopped working opel astra 1.7 litre diesel 03


know more about toyota but try a speed sensor-trans related-good luck-I know no more about that vehicle-JT

Nov 04, 2014 | Opel Astra Cars & Trucks

1 Answer

How to reset counter


Waste ink pad typically captures ink waste when the printer cleans itself (print head). Resetting the counter without replacing the absorbent material can cause ink leakage and a profound mess.Epson suggests servicing the printer, but it may be more cost effective to replace it.

Aug 18, 2014 | Epson NX200/SX200/TX200

1 Answer

Rev counter not working


This shows that a variable current is being given to the rev counter as it should beCheck all connections for dirt , corrosion & fastness especially the rev counter earthIf all the above are good then the rev counter itself has blown

Dec 29, 2011 | 1990 Yamaha FZR 600

1 Answer

After a few seconds the lamp light began to blink red, its a panasonic pt-lb10svu, show no pic at all has a new lamp


Hi, Replacing the lamp in a Sharp LCD projector requires the lamp indicator to be reset. When the lamp needs to be replaced, the indicator becomes red. Resetting the counter for the lamp hours to zero will also reset the indicator to green.
  • Attach the power cord to the projector and plug it into an electrical outlet.
  • Step 2Locate the buttons on the top of the projector and simultaneously hold down the "Enter", "Menu" and "down arrow" buttons, then press the "Standby/On" button.
  • Step 3Continue holding all four buttons depressed until the lamp indicator light begins flashing green.The counter is now reset. Zero hours will now be displayed on the screen.
  • Aug 03, 2010 | Panasonic PT-LB10SVU Multimedia Projector

    1 Answer

    Jaguar 2004 x-type will not start


    its an electrical problem so u r advised to meet ur mechanic

    May 03, 2010 | 2004 Jaguar X-Type

    1 Answer

    Car alarm went off while unlocking the door, now


    you need to reset alarm/immobiliser.lock car with remote, hold button down for 30 secs,then press/hold down unlock button,should reset.another way is with key in ignition/turned on, press alarm button down and hold for 30 secs.this resets immobiliser.toyota
    systems vary..depending on market.

    Mar 30, 2010 | 1991 Lexus LS 400

    2 Answers

    Engine warning light , battery light, warning light , rev counter , speedo and temp gauge going on/off intermitantly and speedo not working on digital screen on ford focus can you help. the battery is new...


    My 04 Ford Focus the battery light keeps coming on & going off, have fitted a new alternator belt but it didn't solve the problem. The battery connections are good. Also the rev counter, speedo & mileage clock keep going haywire when the battery light is on. Do you think it is the alternator? Or is it some other common problem?

    Jan 21, 2010 | 2003 Ford Focus

    1 Answer

    First: alarm went off on its own.(mazda 6 2003). Now when locking and unlocking car sometimes indicators flash and sometimes not. Now red immobaliser light is flashing on dash when driving, then stops...


    there is often a small back up battery in the immobiliser unit itself, if you can locate this unit and replace the battery with the ignition on / engine running, then it should not need recoding and work fine after that. The other thing that could be wrong is the key battery (if the fob has one) or the transponder chip in the key head. If the key signal is low the immobiliser lamp will light during driving, but this does not explain the alarm going off. That is more likely either a poor vehicle battery, alarm / immobiliser back up battery, or another electrical fault such as water leakage into a tail-light or even the alarm unit itself when it rains. A lot of alarms are voltage sensing and when the vehicle is parked they will alarm if the battery voltage changes for any reason, though not during driving so the battery in the immob is my first choice to look at.

    Oct 24, 2009 | 2003 Mazda Mazda6

    Not finding what you are looking for?
    2007 Aprilia Pegaso 650 Logo

    200 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Aprilia Experts

    yadayada
    yadayada

    Level 3 Expert

    75066 Answers

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4514 Answers

    Gino Cussen
    Gino Cussen

    Level 2 Expert

    216 Answers

    Are you an Aprilia Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...