Question about Victory 8-Ball Motorcycles

1 Answer

How do I replace the battery, I am not very mechanically inclined.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 279 Answers

When replacing any battery there are a few simple guidlines that will keep you safe.I assume that you know where the battery is located (most likely under the seat) and you are standing by of the side of the bike looking at it.1)Get a socket or wrench that fits on the terminal bolt snuggly.This is most likely going to be a 10 mm.2)Remove the NEGATIVE cable first.BLACK3) Remove the POSITIVE cable second RED4) Remove or undo the holddown strap.5) Remove battery and position the new battery into place.6) Pay careful attention to the terminal orientation.7) Secure battery 8) Attach positive cable RED to the battery 9) Then attach the negative cable BLACK. This order goes for all batteries in all modern vehicles.Good luck and good riding PS be sure the terminal bolts are tight

Posted on Nov 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sportsart treadmill error 7


Treadmill Parts for SportsArt Belts Motor Brushes SPORTSMITH net
ERR7 Definition: The display board main IC didn't receive the incline variable resistor (VR) value, or the value exceeds the set range. Explanation: The incline VR voltage changes as the incline motor operates, and the display board CPU uses the VR voltage to calculate the incline position. Without this value, the CPU cannot instruct the incline motor what to do, so ERR? appears. Or when the incline set is out of alignment, the VR value exceeds the set range.

The following is a list of possible solutions:

1. Incline Set a) Inspect whether the Incline ERR LED on the drive board lights. This LED indicates that the incline set has exceeded the range. b) Inspect whether the incline set mechanically exceeds range. On DC incline motors, at the 0% position, the line on the thin incline pipe will not align with the end of the thick pipe. On AC motors, at the 0% position, the red line will not appear even with the bottom of the incline window in the incline set. See Incline Troubleshooting Manual for details. c) Inspect whether the incline VR voltage exceeds the range: Put multimeter probes on the incline VR set blue and green wire connectors, while keeping the wires connected. Refer to Incline Troubleshooting Manual for the voltage range for your treadmill. If the incline range is exceeded, either mechanically or electronically, calibrate the incline set. Refer to the Incline Calibration in the Incline Troubleshooting Manual for directions. If the incline set cannot be calibrated electronically, replace the incline VA. If the incline set is stuck and cannot be unstuck, replace the whole incline set. 2. Drive Board Inspect incline voltage on the blue and green wires at the drive board. If voltage is within range, and ERRl appears, inspect drive board component connections and components for wear. 3. Ribbon Cable Inspect ribbon cable for breaks. Inspect connections at the display and drive boards. 4. Display Board Inspect IC connections. Push down to secure connections. Re-insert les.


Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

Feb 04, 2014 | Exercise & Fitness

1 Answer

No flashing LEDs. Joystick and charger indicate full charge.


Time to replace battery - not taking a charge properly.

Aug 21, 2017 | Health & Beauty

1 Answer

Sportsart 3000 treadmill problems


ERR7 Definition: The display board main IC didn't receive the incline variable resistor (VR) value, or the value exceeds the set range. Explanation: The incline VR voltage changes as the incline motor operates, and the display board CPU uses the VR voltage to calculate the incline position. Without this value, the CPU cannot instruct the incline motor what to do, so ERR? appears. Or when the incline set is out of alignment, the VR value exceeds the set range.

The following is a list of possible solutions:

1. Incline Set a) Inspect whether the Incline ERR LED on the drive board lights. This LED indicates that the incline set has exceeded the range. b) Inspect whether the incline set mechanically exceeds range. On DC incline motors, at the 0% position, the line on the thin incline pipe will not align with the end of the thick pipe. On AC motors, at the 0% position, the red line will not appear even with the bottom of the incline window in the incline set. See Incline Troubleshooting Manual for details. c) Inspect whether the incline VR voltage exceeds the range: Put multimeter probes on the incline VR set blue and green wire connectors, while keeping the wires connected. Refer to Incline Troubleshooting Manual for the voltage range for your treadmill. If the incline range is exceeded, either mechanically or electronically, calibrate the incline set. Refer to the Incline Calibration in the Incline Troubleshooting Manual for directions. If the incline set cannot be calibrated electronically, replace the incline VA. If the incline set is stuck and cannot be unstuck, replace the whole incline set. 2. Drive Board Inspect incline voltage on the blue and green wires at the drive board. If voltage is within range, and ERRl appears, inspect drive board component connections and components for wear. 3. Ribbon Cable Inspect ribbon cable for breaks. Inspect connections at the display and drive boards. 4. Display Board Inspect IC connections. Push down to secure connections. Re-insert les.

Treadmill Parts for SportsArt Belts Motor Brushes SPORTSMITH net

Replacement Parts for Fitness Exercise Equipment at SPORTSMITH

Mar 25, 2013 | Sportsart Exercise & Fitness

1 Answer

Error 7


Incline calibration is necessary when: the display shows ERR7, the drive board incline error LED ( LED5) lights or the incline has extended beyond its normal rangeThe goal of calibration is to synchronize the incline set mechanically and electronically. Mechanical calibration sets the incline motor pipe to the 0% position. This happens when the red line on the thin pipe is even with the end of the thick pipe. Electronic calibration sets the variable resistor (VR) value to the 0% position. This happens when the voltage across the VR blue and green wires is 1.20 VDC.
Readings of VR voltage (blue and green wires) should show around 1.20 VDC at the lowest position and around 3.80 VDC at the highest position. If the VR looses calibration or cannot be set to 1.20 VDC, replace the VR. If the incline motor gets voltage from the drive board but fails to operate, replace the incline motor set. If the incline fuse blows again and again, replace the incline motor set.

Jan 19, 2012 | Sportsart 6300 Treadmill

2 Answers

My treadmill is stuck on a 10 incline and will not come down


incline motor is bad or needs calibrated, try this
1. remove safety key
2. press and hold the speed+ and stop keys at the same time
3. Put the safety key in/on and release the keys
4. press stop once
5. hit the incline + arrow and let the incline go the whole way up and down
6. remove safety key and try

Aug 04, 2010 | Nordic Track NordicTrack Treadmill, A2550

1 Answer

Garmin C340 will not take a charge.


The internal battery needs replacement. You can change it yourself if you are comfortable with soldering, and are mechanically inclined.
Search the internet for:
"Replace battery Garmin c330" You'll need a small Philips head screwdriver to open the case, and to remove the battery holder. It is tricky to put the antenna back, so be careful.

Jul 20, 2009 | Garmin StreetPilot C330 GPS Receiver

1 Answer

Alternator replacement


you can get one at a salvage yard pretty cheap. since your not mechanically inclined i would suggest using a repair manual. it will walk you through it step by step, even has pictures. They are about $20 at autozone.

Jun 27, 2009 | 1991 Mazda MPV

1 Answer

When i turn on camera, it says battery empty


ok this happpened to my old kodak once. actually, several times.what i ended up having to do was give it to a mechanically inclined friend to fix. as it turned out, some cable had been fried after one of the times i dropped the camera. so you can either:
  1. get rechargable batteries to save money
  2. buy a new camera
  3. contact a mechanically inclined friend/relative/co-worker

hope this helped!

Apr 04, 2009 | Olympus Stylus 850SW Digital Camera

1 Answer

Car struggling and overheating on an incline


The other mechanic is correct. Your timing belt is due to be replaced. When you have it replaced, make sure you replace the water pump while you're there.

Jul 22, 2008 | 1999 Daewoo Lanos

1 Answer

How to replace internal battery


This website sells a replacement battery and I am going to do it myself. I openned up the unit and it looks pretty easy as long as you are somewhat mechanically inclined and have a sodering tool. i'll let you know if it works out when I do it.

Jul 07, 2008 | Garmin StreetPilot c340 GPS Receiver

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

418 people viewed this question

Ask a Question

Usually answered in minutes!

Top Victory Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Joseph Hoffmann

Level 3 Expert

1706 Answers

Are you a Victory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...