Question about 2008 Harley Davidson FLHR Road king

1 Answer

Security system doesn't seem to turn off when you try to start it. It acts as if you forgot your wireless key. It is necessary to turn it off and on several times before it will finally turn the security system off so you may start it, It takes longer to start it each time.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Harley Davidson Master
  • 3,506 Answers

Check your fob battery first off. Then are there any codes set?

Posted on Nov 16, 2014

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
goalie39
  • 469 Answers

SOURCE: Cannot start my 2004 Sportster 1200 Custom due to security system

Check the battery, try jump starting it with another battery. If the battery voltage drops too low, i believe the alarm default is to disble the bike. (Greasy little criminals will cut battery cables to disarm the alarm) so although you may have enough power to operate the lights and alarm, it may be droppoing too low to start.

Posted on Apr 13, 2009

bozcro
  • 867 Answers

SOURCE: 2007 hd flhx. left turn signal and security light on all the time

may be a short in left handlegrip, remove and inspect wiring

Posted on Aug 21, 2009

  • 221 Answers

SOURCE: After installing new turn singal / security module

after replacing the tssm the ecm and tssm have to be married to comincate

Posted on Nov 23, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Chevrolet Tahoe, still can`t disable alarm system It`s remote radio system, NO PASSLOCK ! Only 3 buttons remote has - Close/Open and Panic All remotes is ok, all buttons are working, but car accept only...


Not sure of the year of your Tahoe but I can tell you the standard procedure to program your key for say like a 1999. First make sure your battery has a full charge. Next if you have any security related trouble codes stored in your computer, you will need to clear the codes either by clearing them with a scanner or disconnecting the battery for at least 10 minutes to clear the codes. The first step is to turn the key and just let it turn over quick but not enough to where the vehicle starts and shuts down again. Just kind of tap the key as if starting it so the starter turns the engine for a second. When you do that just release the key so it stays in the "Run" position. Lights will be on in the instrument cluster including the security light. The security light may flash on and off. Leave the key in the run position for 10 minutes. After 10 minutes the security light usually goes out but not in all cases. After 10 minutes in the run position, turn the key to the off position but do not remove the key. Wait 10 seconds and do the first step again (Tap again let key stay in run position for 10 minutes). You will need to do this 3 times totally about 30 minutes. On the 3rd time when the 10 minutes is up, turn off key, do not remove the key and then start the vehicle. This procedure should work to progam your key. If it doesn\'t you may have another problem with the security system. Let me know how it turns out and I hope there isn\'t another problem and the computer just lost the transponder code. there is a security relay/module that sometimes goes bad in those Tahoes but try programming the keys first. If that doesn\'t work and you need further help as far as that relay/module & to let me know how it turned out,

Sep 30, 2013 | Cars & Trucks

1 Answer

Valet Key Doesn't Start Engine


Sounds like the chip in the key is not allowing the security system to allow the car to start. You may need a new key from the dealer.

Jun 25, 2012 | Volkswagen Jetta Cars & Trucks

1 Answer

Acer doesn't connect to protected wireless internet


It looks like you've keyed it in once, but you keyed it in wrong, so the system thinks the security key is there.

Which Operating System?

You can try connecting to another secured network and see if it asks for a security code, then try going back to your network.

Try getting to the security code by going to the wireless network connection and highlighting your network then click properties.

Apr 04, 2012 | Computers & Internet

1 Answer

I have a 2009 roadking.I am stuck in a parking lot.When I turn the key on,the 4 ways flash and in wont start


your security system is activated...check your battery in your key fob as I believe in the newer models it is a proximity system and the bike senses if you are too far away. Yours doesn't seem to be being reactivated when you get back into range of your bike.

Jun 26, 2011 | Harley Davidson FLHR-FLHRI Road king...

1 Answer

How do you link laptop up to wireless router if u dont have usb memory stick


usb memory stick is not necessary to setup a router (unless you are using some of these newer so-called easy one button security setup systems on some newer routers)

Just hardwire into the router login to the routers setup page...

http://192.168.1.1 (linksys some netgear most others)
http://192.168.2.1 (belkin, some others)
http://192.168.0.1 (dlink and a few others)
http://10.0.0.1 (netgear if it detects wan gateway on 192.168.1.x subnet)

when you log in to the router look at the wireless security settings and write down or copy the key thats the key you will use when windows asks you for a key in wireless setup...(o-yeah those aforementioned one button setups usually set an impossibly long cryptic key that you could possibly never be able to type in by hand correctly first few tries... you may want to change it and turn off WPS the reset the new key on all your other wireless devices...)

Oct 15, 2010 | Computers & Internet

1 Answer

2000 s500 will not start,but key turn


next time you try to start the car just put the key in and turn the ignition on dont try to start it to see if your security light comes on. if any kind of security light come on or flashes call a dealer to find out how to reset the system. if u have the wireless transponder for the security the battery may have gone dead

Jul 30, 2010 | 2000 Mercedes-Benz S-Class

1 Answer

Engine died while driving possible security system problem


is the security light flashing?it should go out when you turn key to run position after a few seconds..if it's staying on,check wiring near skim module(security system)small module under steering column covers..have seen broken wires near module..if not,try removing IOD fuse in underhood fuse block..this will reset skim module

May 14, 2009 | 2003 Dodge Grand Caravan AWD

Not finding what you are looking for?
2008 Harley Davidson FLHR Road king Logo

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Mike

Level 3 Expert

4339 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...