Question about Triumph Trophy 900 Motorcycles

1 Answer

I have a Motorola Patrol Line motorcycle alarm on my bike. The remote to switch it on and off is no longer operational and i cannot switch it off so i can't start my bike. Is there a way to overide this alarm so i can start my bike

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,299 Answers

You can take the alarm off of the motorcycle. The wiring should be very easy to put back to the original. The receiver to the alarm will have the ignition wires cut and the box spliced in the middle. You can just cut the wires on the alarm and splice back the original colors to colors. For an example the blue wire will go back to the blue wire. The red to the red etc.

Posted on Nov 09, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Beret 2 way 5000m alarm siren problem.


These Alarms are so very fickle. If the Alarm lasted a year, then you are out of warranty and I have removed more than my fair share of Alarm's. As the Vehicle owner, you need to realize that your problem is quite common and you should be grateful it has not complete immobilized your bike. My Recommendation is... Remove it and return it to Stock or spend the money and get a higher quality alarm with a great reputation. Don't truck the Install Shop, they get tied to one brand, find the Alarm that meets YOUR NEEDS...

Mar 03, 2014 | Motorcycles

Tip

How to program Chrysler Remote Transmitter


A Chrysler Transponder Key once programmed into a one car cannot be programmed to work any other car.

The transponder code identification is learned by the Sentry Key Immobilizer Module during programming. The Sentry Key Immobilizer Module sends the "Secret Code" to the transponder key and is retained by the transponder key during programming. After programming of the transponder key identification to the Sentry Key Immobilizer Module and the Secret Code is exchanged, the Sentry Key Immobilizer Module will ask for the transponder identification and the Secret Code every time the key is turned to ON or START.



No Emergency "Start" procedures for Chrysler vehicles.



Chrysler Key Operation and Programming



Model: 300 Year: 2005 - 2008

Model: 300C Year: 2005 - 2007



Remote alarm / central locking



System Operation



  • Pressing key LOCK button activates alarm and central locking.


  • Pressing key UNLOCK button once deactivates alarm system and unlocks driver's door.


  • Pressing key UNLOCK button twice within 5 seconds deactivates alarm system and unlocks all doors and trunk.


  • Pressing trunk lid button twice opens trunk lid.


  • System will automatically lock all doors when vehicle is driven above 15 mph.


  • Additional functions can be set to respond to the transmitter.


Programming



When



  • Key transmitter added or replaced.


How



  • Key transmitter is programmed during immobilizer programming procedure.


Immobilizer

System Operation



  • Switch ignition ON.


  • Immobilizer warning lamp illuminates for approximately 3 seconds.


Programming



When



  • Keys added or replaced.


How:



NOTE: Two programmed key transmitters must be available for the following procedure to operate. If none available key transmitters can only be programmed using diagnostic equipment.



  • Insert first programmed key into ignition switch.


  • Switch ignition ON for at least 3 seconds but no longer than 15 seconds.


  • Turn ignition OFF and remove key.


  • Withing 15 seconds insert second programmed key into ignition switch and turn ignition ON.


  • After 10 seconds an acoustic signal will be heard and immobilizer warning lamp will flash.


  • Turn ignition OFF and remove second programmed key.


  • Within 60 seconds insert non programmed key into ignition switch and turn ignition ON.


  • After 10 seconds an acoustic signal will be heard and immobilizer warning lamp will illuminate for 3 seconds.


  • Switch ignition OFF.


  • Remove Key.


Check operation of programmed key transmitter.

Repeat procedure for additional key transmitters if required.





Model: 300M Year: 1999 - 2003

Model: Concorde Year: 1998 - 2003

Model: LHS Year: 1998 - 2001

Model: PT Cruiser Year: 2000 - 2005





Remote alarm / central locking



System Operation



  • System will automatically lock all doors when vehicle is driven above 15 mph.


  • Pressing remote transmitter UNLOCK button once deactivates alarm system and unlocks driver's door only.


  • Pressing remote transmitter UNLOCK button twice within 5 seconds deactivates alarm system and unlocks all doors.


  • Alarm / Central locking functions can be altered using remote transmitter.


Programming

When



  • Remote transmitter added or replaced.


How:

NOTE: One programmed Remote transmitters must be available for the following procedure to operate.



  • Obtain all remote transmitters.


NOTE: Any existing remote transmitters not used during programming will become inoperative.



  • Switch ignition ON.


Using a programmed remote transmitter proceed as follows.



  • Press and hold remote transmitter UNLOCK button.


  • After holding the UNLOCK button for at least 4 seconds but no longer than 10 seconds, press remote transmitterPANIC button for at least 1 second and release both buttons.


  • Ensure acoustic signal is emitted indicating programming mode active.


  • Within 30 seconds carry out the following procedure for each remote transmitter (including previously programmed remote remote transmitter)


  • Press any button of each remote transmitter to be programmed.


  • Ensure acoustic signal is emitted after each remote transmitter operation.


  • Programming must be completed within 30 seconds.


  • Switch ignition OFF or wait 32 seconds to exit programming mode.


Ensure final acoustic signal is emitted.

Replacement remote transmitters can also be programmed using diagnostic equipment.



Immobilizer



System Operation



  • System arms after switching ignition OFF.


  • Switch ignition ON.


  • Immobilizer warning lamp illuminates for approximately 3 seconds.


Programming



When



  • Keys added or replaced.


How

NOTE:Two programmed key transmitters must be available for the following procedure to operate.



  • Obtain all keys.


  • Using first programmed key turn ignition switch ON and wait 3 seconds, return to OFF position and remove key.


NOTE: First and second programmed key operations MUST be performed within 15 seconds.



  • Insert second programmed key and switch ignition ON.


  • Wait approximately 10 seconds.


  • Ensure immobilizer warning lamp begins to flash and an acoustic signal is emitted.


  • Switch ignition OFF and remove key.


  • Within 50 seconds, insert new key and switch ignition ON.


  • Wait approximately 10 seconds.


  • Ensure acoustic signal is emitted and immobilizer warning lamp remains illuminated for 3 secondsindicating programming completed.


For each additional key repeat procedure starting from the beginning.

Replacement keys can also be programmed using diagnostic equipment.



Automotive and Commercial Locksmith Chrysler Remote Control Programming...

on Mar 26, 2015 | Televison & Video

1 Answer

I cannot find the stop light switch on my 2007 Ural Patrol. The brake lights do not work on either the sidecar or the bike itself.


Checking fuses first then bulbs befor checking the switch might save some work. not too often that both brake switches quit at same time.

Mar 26, 2010 | 2001 Ural Solo

1 Answer

Yam r1 no go,put new batts in remotes,meta 357t,will not code in,can not turn imobb off to start bike up.(help)


got bike started,managed to recode remote just once,when bike stopped, would not restart alarm has spiked back,requires new alarm system.

Feb 15, 2010 | 2001 Yamaha YZF-R1

1 Answer

Just purchased 2003 HD Duece, set alrm and now it


I believe on that model you have to hit the remote once to turn the alarm ON and twice to shut it OFF. Or the other way around. If that doesn't work you will have to borrow or buy an owner's manual to learn how to reset and operate the alarm. It is VERY complicated to set up properly. 10 pages in the manual!!! You can cancel the alarm thru the turn signal buttons, but you will need the manual and 5 digit pass code to do it.

Apr 28, 2009 | 2003 Harley Davidson FXSTDI Softail Deuce

1 Answer

How to wire in a stereo amp to a switched (remote) line?


Check your fusebox. Test each fuse with the inition off, then each with the ignition on. Use one that is live when the ignition is on, but not when it is off. There is your switched line. It will probably be the largest amp fuse on the bike.

You could tap into the headlight power, that is a switched line and it is up near the front. If you're putting the stereo near the back the tail light is also switched.

Apr 24, 2009 | 2006 Yamaha Roadliner S

1 Answer

2003 Dyna FXWG low battery?


sounds like the alarm is set and wont let the ignition work

Mar 19, 2009 | 2003 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

Immobilser and Alarm System


Hi, Rcpirate for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day.
Disabling 2002 k1200LT alarm BMW Luxury Touring Community
http://forums.bmwmoa.org/showthread.php?76595-K1200LT-Security-System-Issue-Doesn-t-allow-starting
https://www.rbracing-rsr.com/downloads/K1200LT_Repair.pdf
BMW Motorcycle Parts Fiche OEM BMW Motorcycle Parts online 1970 present BMW
http://www.bmw-motorrad.com/fi/fi/bikes/tour/k1200lt/media/Rider_s_Manual_K_1200_LT_2008.pdf

Nov 30, 2008 | 2003 BMW K 1200 LT

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

154 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74896 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...