Question about 2001 Suzuki AX 100

1 Answer

My Suzuki AX100, 2009 model started stalling when I shifted down and also it was really tough to start (kick start), so I had the carborador cleaned. It started so smoothly right after and I toured around and felt like it was brand new. A few hours later, I tried to start it again and it was tough, but I got it. The next morning, getting tougher, and finally now it won't start. I had the carborador looked at again, thought it was fixed and basically went through the same thing again, but within a day, I couldn't start it again. Any ideas???

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 653 Answers

1. Have you recently replaced the air filter element?
2. Drain all fuel from tank, lines before installing renewed carburaetor then fill the bike again see what happend.
3. Make sure that when filling up no oter debris or dirt got into your tank.
4.Is your choke auto or manual? If manual ensure that it is normal after riding around as it foul up your air mixture ratio.
Good enough, please return a comment. Thanks

Posted on Nov 09, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Replaced clutch and now won't shift into 1st, 3rd, or 5th gear


if it worked before why a new clutch,,,(context wins, here/??????)
ok, so you the clutch is failing,
you never posted the symtoms, not really
does car start in gear with clutch depresses, or start to move
does car take off in 1st ?
or is it just moving fast issues>????
cant up shift, cant down shift
hard to shift. (blocks)
grinds.

my wild guess, based on no input is the clutch linkage,
was never adjustED
the side kicks (not sport 1.8L) all have
cable clutches, and the 1 inch rule stated here.
i bet you didnt adjust it or the linkage splines are damaged.
or the pedal is cracked , caused by bad cable.
always replace the cable first. is it breaks other things if not.

http://www.fixkick.com/tranny/clutch/clutch-on-kick.html


tell the full story and get ,very accurate tests to do,
and inspections.

Sep 02, 2014 | 1995 Suzuki Sidekick

1 Answer

1997 Suzuki Intruder VS800...starts, runs, stalls


Hi, Anonymous the ignition circuit cut-off system comprising of the side stand switch, clutch switch and neutral switch has the following functions:
a. It prevents starting when the transmission is in gear and the side stand is up, but the clutch lever is not pulled.
b. It prevents starting when the transmission is in gear and the clutch lever is pulled, but the side stand is still down.
c. It cuts the running engine when the transmission is in gear and the side stand is moved down.
Periodically check the operation of the ignition circuit cut-off system according to the following tests.
With the engine turned off:
1. Move the side stand down.
2. Make sure that the engine stop switch is set to "RUN"
3. Turn the key to "ON".
4. Shift the transmission into the neutral position.
5. Push the start switch if the engine does not start the neutral switch may be faulty.
With the engine still running:
6. Move the side stand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the side stand down if the engine does not stall you may have a faulty side stand switch.
After the engine has stalled:
10. Move the side stand up.
11. Keep the clutch lever pulled.
12. Push the start switch if the engine does not start you may have a faulty clutch switch.
This check is most reliable if performed with a warmed-up engine.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Intruders Alert
Total Motorcycle Forums
Suzuki VS700 Service Manual
OEM parts for Suzuki
Suzuki VL800 Owner Manual

May 12, 2017 | 1997 Suzuki VS 800 Intruder

1 Answer

Bike sat all winter starts but wont shift stalls if you put in gear


Check to see if it has a neutral safety switch at the kick stand. If it does and the switch thinks the stand is down it will die putting it into gear. This happened to a friends Yamaha V-max. We replaced the switch and all was good.

Feb 19, 2011 | Suzuki DL 650 V-Strom Motorcycles

1 Answer

My suzuki gz marauder won't go down into first or neutral..kick all way down but starts off in second gear..keep stalling at busy junctions.


The bike has a bent shift fork. The engine will need to be torn completely down to replace the bad fork. Check with a local Suzuki dealer as to the cost an to confirm what I believe the problem to be. I fear the cost will be over $700. Bummer. As to the engine stalling, cleaning he carb will probably fix the problem. Please rate my answer. Thanks.

Sep 09, 2010 | 2003 Suzuki GZ 125 Marauder

1 Answer

My 1994 suzuki intruder starts but as soon as you


loose or broken ground wire ,could be broke under insulation, vibration of motor makes it lose contact. probably on gear indicator switch.

Jul 28, 2010 | 1995 Suzuki VS 1400 Intruder

3 Answers

Rmz 250 04 model wont idal or kick start


Like I told somebody earlier to day lower the octane rating of the gas you are using....repost if you need anything futher......

Jun 22, 2009 | 2005 Suzuki RM-Z 250

1 Answer

Car idles, starts just fine but when I shift into gear it stalls.


It sounds like the kick down cable or "down shift cable" This is the cable on the transmission that shifts back down when the car slows. The transmission is most likely stuck in a higher gear and simply stalls the engine when shifted. replace this and i believe you will be back on the road. Hope this helps. Good luck.

Jun 10, 2009 | 1994 Plymouth Acclaim

2 Answers

Back fire on suzuki sv650s


you have to tune your engine using the following ways.
1. tune your fuel air screw for optimal settings.(in most cases inappropriate tuning is the reason for backfires)
2. check and clean your spark plug and the wire connecting your spark plug.
3. check the voltage levels of the battery. if they are low then recharge them.

Jun 06, 2009 | 2006 Suzuki SV 650 S

Not finding what you are looking for?
2001 Suzuki AX 100 Logo

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...