Question about 2006 Harley Davidson FXDCI Dyna Super Glide Custom

1 Answer

How do I remove the battery fron a 2006 Dyna Super Glide Custom ?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 653 Answers

Your battery is normally located under your RH cover. Remove cover and it should be easily identified as a black box with 2 cables attached to it. Normally you will find 2 bolt screws holding a (+) Positive (Red) and (--) Negative (Black) terminal cables. You can use a size 10 spanner, a No. 2 Phillips screw driver or a size 10 socket drive to unbolt them, start with the Black terminal cable then the Red one. Make sure that Red terminal doesnot touch anything, yet best practise is to wrap Red cable with cloth to avoid it contacting any surface. You'll see that the battery is held up by a bracket consist of 3 bolts screws, undo bolts, remove bracket after carefully removing any wires it holds, and just tilt the battery forward and out. There that's done. If helpful please return a comment.

Posted on Nov 08, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 dyna super glide ignition switch is loose


So, is it a 2006 or a 2007????

Here is how to remove and replace the particular ignition switch. With that knowledge you should be able to tighten or replace loose fasteners as well.

IGNITION SWITCH for 2007 FXDWG, FXDC Models

First remove seat and then disconnect the negative battery cable and put some tape over the end or otherwise ensure it is insulated such that it could not touch any bare frame part or the battery negative terminal. Next remove the two fasteners that secure the instrument panel to the fuel tank and remove the panel noting the position and colour of the switch wire connectors and disconnect the wires. Then remove the four switch mounting screws and replace the switch. Then reconnect the switch wire connectors in their original positions and re-install the instrument panel with the two instrument panel installation screws and tighten the acorn nut to 18-24 in-lbs or (2.03-2.71 Nm). Then reconnect the battery cable and install the seat and check to ensure that the seat is firmly and properly in place.

Jul 12, 2014 | 2006 Harley Davidson FXDCI Dyna Super...

1 Answer

Loose ignition switch on a 2006 dyna super glide custom also won't lock the fork


it wont as the lock locator will be out of line on the frame ! tighten up lock should sort !

Dec 03, 2013 | 2006 Harley Davidson FXDCI Dyna Super...

1 Answer

2006 super glide ignition


Hi Anonymous, call, take a ride or trailer your bike over to your local dealers service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary/possible and offer professional advice and assistance concerning your issue. Good luck have a nice day.

Sep 07, 2012 | 2006 Harley Davidson FXDCI Dyna Super...

1 Answer

How do I get access to the battery on a 2010 super glide harley davidson


Hi Anonymous, for more information about your question please visit the website below. Good luck and have nice day.
Harley Davidson Maintenance Tips Softail Dyna Battery Seat Install

Jun 21, 2012 | 2010 Harley Davidson FXDC Dyna Super Glide...

1 Answer

Will removing battery cables on 2008 Harley Super-Glide clear trouble codes?


Hi Nbfxdc8, not really for more information about your question please visit the websites below. Good luck and have nice day.
Harley Diagnostic Codes 04 to Present

Mar 16, 2012 | 2006 Harley Davidson FXDCI Dyna Super...

1 Answer

How do I remove the seat on a 2002 Supe Dyna Glide?


Remove the screw from the rear seat bracket.

Slide seat to the rear of the motorcycle and lift the seat. There is a tab that secures the seat to the frame under the front of the seat.

The strap can remain in place and slid to the lower front section of the seat. The seat can be slid thru the strap.

Dec 05, 2010 | 2006 Harley Davidson FXDCI Dyna Super...

1 Answer

How to remove battery cover of 08 Dyna Super Glide


There are two bolts to the left of the battery cover one holds the bracket the other lowers the battery

Mar 17, 2010 | Harley Davidson FXD Dyna Super Glide...

Not finding what you are looking for?
2006 Harley Davidson FXDCI Dyna Super Glide Custom Logo

360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...