Question about Aermacchi Sprint 350 Motorcycles

1 Answer

I have a 1978 ss175 I bought from someone that had bought it brand new and had never cranked it.I took it to a friend of mine who has a motorcycle mechanic shop.He cleaned carb. put new spark plug. He also changed outer crank seal because he noticed it was sucking air.The bike runs great but it can be very hard to start.Steve

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 2,926 Answers

If the outer seal was replaced because it was defective, was the inner seal replaced too? The inner seal may be pulling air during start up. Compression is what psi and is it within specs?

Posted on Nov 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1978 Suzuki GS1000 Battery Dies Out After a Week


Either there is a short somewhere or your starter is dragging.

Jun 23, 2017 | Motorcycles

1 Answer

I just bought a 1978 650b.It needs alot of tlc.carbs look clean when i took them apart.looks like a pretty good set of points.bought brand new plugsit doesn't want to idle below 1500 rpm by it self.idle...


Replace the pilot and main jets then really clean the carbs soak them in a good carb cleaner. When you re assemble the carbs make sure you have the air screws turned all the way in then one full turn out start from that setting.

Jul 19, 2010 | 1977 kawasaki Z 650

1 Answer

I bought a 1978 Suzuki GS750 last fall. The


clean the carbs...make sure you clean the jets!!!...put fresh petrol in it..& fit new plugs...also make sure the battery is charged up & in good condtion

Mar 22, 2010 | 1978 Suzuki GS 750 E

2 Answers

Starting when cold


I had a 900ss which had same prob,I took plugs out and bought some hot plugs worked for me hope this helps

Sep 06, 2009 | 1978 Ducati 900 SD Darmah

1 Answer

Problems starting my 2003 Yamaha TTR225


The cylinder is the coil. It might be bad but it is expensive and you would not replace it till you know for sure there is no spark. You can take the plug out and then put it on the wire and ground it against the engine while a friend cranks the starter. Look for the spark flash. Make sure the kill switch is in the "on" position.
If that shows a spark then you will need to move into a different line of troubleshooting. I always recommend that people buy a Clymer manual.

Jul 31, 2009 | 2003 Yamaha TT-R 225

2 Answers

VOLTS? AND ENGIE OIL ?


hi,

this is a 6 volt system so you will need a 6 volt battery. also i would recommend a good motorcyle oil over auto oil mobil 1 v twin or lucas brand oil 20w 50 or 5 w 50 full synthetic. synthetic is better than conventional oils it will last longer and resist high rev breakdowns. good luck ride hard live free!

Mar 29, 2009 | 1971 Aermacchi Sprint 350

1 Answer

Need diagram of the inside of the clutch


Hi,
for a detailed diagram, check out http://www.Alpha-Sports.com
hope this will help you out.
greetzzzz, Gilbert.

Feb 27, 2009 | Honda XLR 125 R Motorcycles

2 Answers

1990 626 won't start when engine is hot


I had the same problem a few years ago. The problem was a cracked coil. The unit would expand and separate when the car got hot and it took a while to cool off and reconnect.

Nov 26, 2008 | 1997 Mazda 626

1 Answer

My brand new phone displays cant connect


The Vtech phones are junk in my personal opinion. I had the same trouble as you & more. The phone dies after just two hours of use. God forbid you don't put the phone on it's charger. I took mine back for a refund & bought another brand. I suggest you do the same. I also know there is no way to put the phone system back in the plastic box you got them in. It's not a problem. As long as you have a recipt. You can't fix a terd. I'm not the only one who knows about Vtech. Two of my friends bought the same 5.8Ghz's & they took theirs back as well.
This is a good fix Tammy.

Feb 03, 2008 | Vtech 5.8GHz Cordless Phone with Digital...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

36 people viewed this question

Ask a Question

Usually answered in minutes!

Top Aermacchi Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

magna buff

Level 3 Expert

3828 Answers

Gregg Mahin
Gregg Mahin

Level 3 Expert

39875 Answers

Are you an Aermacchi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...