Question about 1999 Ducati ST 2

1 Answer

I am looking for the torque settings for all bolts etc for an ST2 1998 does any one have the full torque settings?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 10,515 Answers

Hi,

Which bolts are you referring to ??? Wheel or fuel filter???

If you are looking for the complete details for the bike, it could only be available in service manual. You could buy the service manual from :-

http://www.tradebit.com/filedetail.php/4981006-ducati-st2-service-manual

It is as low as $7.85.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Nov 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What are the torque settings for a Kia picanto engine 1 litre


If you stipulated which settings; main bearing, big ends, head bolts, sump bolts, etc etc etc you may get a reply.

Sep 02, 2017 | Kia Cars & Trucks

1 Answer

4610 ford diesel tractor water pump bolt torque settings


First you need to know the diameter of the bolts and the type of thread ie 3/8 N/C or 5/16 N/F then look at the type of bolt ie plain steel or high tensile SAE grade 3, 4, or 6, once you know this go to a general purpose bolt torque chart, and derive the torque spec info.
If the water pump is cast iron use the full torque specification.
If the water pump is alloy then reduce the torque spec 10%

Below is an example of a general purpose bolt / nut torque chart

26186159-4xbrgr0a3wt3vp4m2wlhd0as-1-0.jpg

May 05, 2016 | Ford Cars & Trucks

1 Answer

Torque settings for main and bigend bearings


First you need to know the diameter of the bolts and the type of thread ie 3/8 N/C or 5/16 N/F then look at the type of bolt ie plain steel or high tensile SAE grade 3, 4, or 6, once you know this go to a general purpose bolt torque chart, and derive the torque spec info.
If the engine block is cast iron use the full torque specification.
If the engine block is alloy then reduce the torque spec 10%

Below is an example of a general purpose bolt / nut torque chart

26183784-4xbrgr0a3wt3vp4m2wlhd0as-1-0.jpg

May 03, 2016 | 2011 Ford Fiesta 1.4

1 Answer

Do you know the torque settings for the pressure plate bolts on an unidentified vehicle?


Without the make, model, year... and the reliability of your torque wrench... I'd rather discuss the difficulties involved in reverse drilling and EXTRACTING broken bolts..

Why in the world would I be looking at such a question without a spec of detail(s) on the surrounding vehicle??

Try buying detailed specifications on bolts, grades of steal, micrometers... high end torque wrenches, etc.

Better avenue... repost with the vehicle details... we can give it a serious effort.


http://www.bing.com/search?q=torque+specifications+chart&form=PRDLC1&src=IE11TR&pc=EUPP_DCTE

Mar 24, 2016 | Cars & Trucks

2 Answers

Head bolts pattern


torque? on and off , sequence?
there are head bolt seq. and cam cap seq,
and more. in the fsm. page 1D-45
1st remove seq.
4a3c0e21-e3a5-45cf-873f-ee36057315aa.jpg
now , install sequence.


84ea4a12-b50c-45a7-838e-63f7cbedd9c1.jpg


log in to alldata.com and see all the other details, on engine
assembly, the warnings, and special details.

May 13, 2014 | 2002 Suzuki XL-7

1 Answer

We were wondering the torque on the head bolts on a Kohler motor for a lawn mower.


Hi and welcome to FixYa. I am Kelly. These torques are from the Kohler Service manual for the
CV11-16,
CV460-465,
CV490-495
engine.

There are 5 bolts.... as you look at the bolts there should be 3 on the left side

Bolt 1 is the center (offset bolt)
Bolt 2 is upper right
Bolt 3 bottom left
Bolt 4 upper left
Bolt 5 lower right.

Torque them in the sequence above... to 15 Ft lbs. or 180 inch lbs
reset your torque wrench and then torque them to 30 Ft lbs or 360 inch lbs.

Rocker arms center nuts (called mounting screws) are first torqued to 55 inch lbs then to 100 inch lbs.

Then to set the valve lash you back off the set screw lock nut torque and set the valve lash to .003 - .005 final set screw lock nut torque is 65 inch lbs. Engine must be at TDC i.e piston all the way to the top to make the correct adjustments.

Thanks for using FixYa.

Kelly

Jul 17, 2010 | John Deere Garden

3 Answers

I need torque settings for the engine ie head bolts v6 engine 1


i am replacing the heads on a GMC 350 cu in engine. what is the final torque of the head bolts?

Jul 15, 2010 | 1985 Chevrolet Camaro

1 Answer

Torque settings for renault megane engine


Does anyone know the torque settings for the following Cam box(bolts), head bolts & crank shaft, the megane scenic is 2001.

May 01, 2009 | Renault Sportwagon Cars & Trucks

1 Answer

Replacement of a head gasket on 2.5 liter nissan altima 2002


frajogag: First off, be aware that these bolts are "torque to yield" bolts (streach bolts). What this means is that instead of torqueing the head bolts to a specific torque specification, they are torqued down to a set spec and then tightened by rotating the bolts a certain angle, like 90 degrees. and all of them are turned the same amount.
This means that the shanks of the bolts must be checked to make sure they are not too thin (or the bolt has already stretched beyond limits and is prone to snap if used)
Here is how you check the bolts. Measure the bolt using a micrometer, at the base, or within the first 13mm from the end where it threads in. Then go to about 10mm before the threads end heading toward the top of the bolt. There should not be more than a 0.23mm (.0091 inch) or less difference or the bolt should be discarded.
Torque the bolts down to 98.1Nm ( 72.ft lb)
Looking at the head from the side, so you are looking at the full length from side to side, I will number the head bolts in this fashion.
#1 & 2 are directly in front of you and in the center of the cylinder head crossing it width wise.
#3&4 are to the left of #1&2, / #5&6 are to the right of #1&2
#7&8 are to the left of #3&4 / #9$10 are to the right of #5&6
Now, you have the sequence.
After the initial pull, back off all the bolts in the same sequence and then retorque them to 36 Nm ( 28 ft lb)
Using a torque angle wrench or having the ability to accurately judge turning angles. Rotate (clockwise) to a 75 degree angle. do this to all the bolts using the sequence I had provided.
Rotate the bolts (clockwise) 75 degrees again on all bolts in the same sequence. The proceedure is complete!

Mar 10, 2009 | 2002 Nissan Altima

Not finding what you are looking for?
1999 Ducati ST 2 Logo

Related Topics:

85 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ducati Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

bobkoure

Level 1 Expert

36 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

Are you a Ducati Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...