Question about 2000 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

Neutral lite not working - 2000 Harley Davidson FXDWG Dyna Wide Glide

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 134 Answers

Check the wire going to the transmission neutral safety switch, should be located on top of trans with a two wire connector, make sure both wires are secured to the switch. It is possible that the switch itself is faulty or that the indicator bulb is faulty. To test the switch you will need a volt/ohm meter. Set the meter to volts on a scale that will register 12 volts. Connect the positive probe to one side of the switch, the negative probe to ground. With transmission in neutral and ignition on, the meter should register voltage on either side of the switch. If it does, the indicator bulb may be the culprit. If it does not register voltage, the switch itself is probably the issue.

Posted on Nov 04, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

06 Honda Shadow -no speedometer or odometer or neutral light.Checked the fuse.high beam and turn signal indicator work fine.share a ground somewhere? The bike starts-the computer knows it's in neutral


Hi Bryant, Get out a test lite and start checking for power to speedo by connecting test lite to ground then ckeck for proper ground from speedo by connecting test lite to a power source. also check all wire connectors where the pins attach to the wire and where the pins connect in the plastic socket housings Good luck

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Apr 01, 2015 | Honda Motorcycles

1 Answer

My neutral lite cumes on when bike is hot vn 800


Check wire in harness. Switch is just a ground so if wire is touching hot couldn't light. Unplug switch when hot and see if light stays on. If so wire is grounding.

Oct 09, 2014 | Motorcycles

1 Answer

Hot bus bar YES! The Neutral bus bar gets HOT on


1991holiday ramble aumi lite when we pluged it in one of the wire was not wired right fix the wireing all works excepts the lights it blow all the bubs tryed new one the nights still will not work

Aug 05, 2013 | Cutler Hammer Electrical Supplies

1 Answer

The neutral lite wont stay on , the foot lever is not allowing it to go to neutral


The neutral light won't stay on because the gearbox isn't in neutral. try rocking the bike backwards and forwards, kick the gears down as many time as you can (at least 6) and then try moving the gear lever up one until the bike moves freely backwards and forwards. Your bike should then start. It would be easier to identify any problems if you let us know the make and model of the bike.

Feb 11, 2013 | Motorcycles

1 Answer

What is building wireing fault


The UPS is sensing either a lost ground... or a swapped hot-neutral connection.I wouldn't think the UPS is that smart to sense an open Neutral..
make sure you have a good 3 wire connection going to the UPS...

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/lisa_52daba487e5b4d53

Aug 24, 2012 | Tripp Lite Lite Internet Office 280 UPS...

1 Answer

My 2002 f150 will only start in neutral what's the problem


Check fuses and tail lights see if all working. The truck will not start if brack lite are not working

Jul 04, 2012 | 2002 Ford F150 Regular Cab

1 Answer

1996 1500 NEUTRAL LITE NOT ON WHEN ITS IN NEUTRAL & IT WILL NOT START


you will have to find swicyh either on gear selector or in gear box and test proberley not working or stuck or chk for a blown fuse

Mar 11, 2012 | 1996 Honda GL 1500 SE Gold Wing

1 Answer

My 1984 gl1200 aspincade will not start, my neutral lite will not come on.does the neutral switch in the front engine cover. if that switch is out will it stop the start botton from working


Make sure the engine kill switch in the off position ?
If the neutral switch is malfunctioning it can send a wrong signal which should be countered by pulling the clutch.

Mar 23, 2010 | 1984 Honda GL 1200 Aspencade Gold Wing

1 Answer

My kz1300 only starts with the clutch in-and the neutral light dont lite up.I checked the neutral lite bulb and its good. anyway to trouble shhot the switches-i hate to just throw parts at it. Thanks,Doug


the nutral switch would be a simple open /closed switch located near the shifter . meaning if it is in neutral the switch should allow power thrugh and if it is not in neutral there should be no continuity.

Mar 21, 2010 | 1980 kawasaki KZ 1300 A2

2 Answers

Auto shift lever will not engage


I have repaired many such issues on ford trucks, the column will have to be taken apart and inspected, there will be broken parts

Sep 22, 2008 | 1986 Ford F 250

Not finding what you are looking for?
2000 Harley Davidson FXDWG Dyna Wide Glide Logo

455 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4988 Answers

Mike

Level 3 Expert

4350 Answers

yadayada
yadayada

Level 3 Expert

80531 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...