Question about 2004 KTM EXC 250 Racing

1 Answer

As soon as i kick the bike over it over reving really loud

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 134 Answers

Be sure that the slide in your carb is in corectly, if it in wrong it won't allow the slide to drop all the way down. Check for cable adjustments.

Posted on Nov 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why my pitbike wont start or cuts out


Yep, clogged fuel filter, dirty carb. ????

Mar 24, 2013 | Pit Bike 125cc 4 Stroke Dirt Bike

1 Answer

My kmx 2001-2002


sounds like a voltage regluator

Oct 04, 2012 | Motorcycles

1 Answer

Hi i have a julin fighter scooter 50cc this morning the drive belt broke replaced the drive belt got the bike to start and it revs high when on the stand but when we kick it off the stand it will only tick...


Hi, Anonymous and the usual suspects are:
1. Severely drained or faulty battery.
2. Faulty regulator/rectifier or high output coil.
3. Faulty power valve, solenoid or installation.
4. Clogged air filter or exhaust.
5. Cracked or incorrect float level.
6. Float needle is not seating.
7. Faulty reed valve.
Good luck and have a wonderful day.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 03, 2017 | Motorcycles

1 Answer

MY 2007 KAW ZZR 600(10,000 MILES) KILLS EVERYTIME IM COME TO A STOP,WHEN DOWNSHIFTING FROM 2ND GEAR AND UP...IF IM IN FIRST AND IM SLOWING DOWN OR STOPPING..ITS FINE..BUT IF IM IN LIKE THIRD AND IM DOWN...


Try jumping out the kick stand safety and see if it cures your problem. I had a similar problem but it occurred upon acceleration and seemed to happen at the worst times while passing. It drove me nuts to find the problem and it turned out to be the kick stand safety switch. I permenently disabled that SOB and never had the problem again.

Jun 27, 2011 | kawasaki ZZR 600 Motorcycles

1 Answer

Bike was running perfect then it bogged down. now it wont start and is making a really loud squeeking noise when i try to kick start it. iam begining to think it could be the piston and/or rings but not...


Sounds serious, but good that you have compression. Can you remove the head? If yes, you can get a look at the cylinder walls.
Hard to diagnose without disassembly.

Aug 23, 2010 | kawasaki KX 125 Motorcycles

3 Answers

Vfr 400 nc24 whining noise when engine is reved


The loud whining noise is just normal for vfr 400 because it is gear driven cam.. As you reach 5000rpm up, the bike's electrics try to misfire the plugs so it would act as a speed limiter (180kph).. You have to bypass the sensor at the speedo..

Sep 28, 2009 | 1988 Honda VFR 400 R NC24

2 Answers

Wr250f 2001.riding bike reved and stopped wont kik properly


if this is a two stroke,then if you have run it out of fuel,there is no lubrication for the piston and you may have damaged the piston or piston rings,check the compression,esay test is remove sprk plug pit your finger hard into the hole and crank the bike over,if your finger gets pushed off with loud crack sound then compression should be ok,but if it doesnt and the preesure is very weak then you will be looking at a top end rebuild,hope this helps

Jun 24, 2009 | 2003 Yamaha WR 250 F

1 Answer

1991 CR 500 (reving to high on idle high serges)


take some wd 40 & spray around the carb boot while running to see if the idle drops for a few seconds. sounds like you have an intake side air leak causing a lean condition making the motor rev high.

Feb 16, 2009 | 2001 Honda CR 500 R

Not finding what you are looking for?
2004 KTM EXC 250 Racing Logo

Related Topics:

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts

Marvin
Marvin

Level 3 Expert

83772 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

5602 Answers

Steve Banks

Level 2 Expert

232 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...