At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
First, open fob and make sure battery is making good contact and no corrosion on contacts.
Also, you might need a new fob battery.
Finally, if you know the security code, you can disable the security system.
DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!
Turn IGN to IGNITION.
Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")
Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5) The 1st "-" will become the 1st digit (i.e., "5")
Press RIGHT switch signal 1 TIME. The 1st digit is stored and the dash will flash.
Enter 2nd digit (b), and repeat sequence until done.
After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.
The system will stay off until the IGN switch is turned off.
If at any time during disarming sequence an error is made, wait 2 minutes before trying again.
Yes, you do need to take it to dealership to match the fob. BUT, to get it to the dealership, you can bypass the fob IF you know the security code.
DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!
Turn IGN to IGNITION.
Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")
Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5) The 1st "-" will become the 1st digit (i.e., "5")
Press RIGHT switch signal 1 TIME. The 1st digit is stored and the dash will flash.
Enter 2nd digit (b), and repeat sequence until done.
After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.
The system will stay off until the IGN switch is turned off.
If at any time during disarming sequence an error is made, wait 2 minutes before trying again.
The key fob is not getting detected by the bike.-------
The turn signals start flashing because it thinks the the key fob is not close to the bike.-------The batteries are replaced, but still key fob is not getting detected.------Try this :--- Turn the handlebars to the left and lock them with the key. Once locked, unlock and try to restart, this resets the alarm on my 2008 FLHX.----Try raising the kickstand and let the bike go. And see if it runs.If it runs then kick stand switch needs to be inspected and replaced.---------------This will help.Thanks.Helpmech
I'm not familiar with the later model bikes. My expertise is in the earlier models but if your Street Glide has the large ignition switch that is in the steering head, do not remove it. You can get it out but you can't get it back in without a special tool to align the different parts. Take that one to the shop.
Id check the fob battery or replace it w/ new one. 2 use the code you input useing the turn signals to start the bike.. 3 do the wow test & check for codes.. in allarm module..good luck..
×