Question about 1979 kawasaki KE 125

Open Question

I bought a Kawasaki Ke 125 - 1979 and I just put the rear turn signals but unfortunately they light but do not flash. What could be wrong? thanks

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 124 Answers

SOURCE: Points gap for Kawasaki KE 125

Point gap will be .14. Make sure after you set the points at .14 you attempt to insert a .16 feeler gauge. It should not go between the points without moving them. Also, a .12 feeler gauge should slip in without any force.

Posted on Nov 23, 2009

Ad
  • 107 Answers

SOURCE: Hi, my name is Gregory. I live in Belgium and I

yuo can purchase universal lights through a parts magazine

Posted on Sep 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 Kawasaki Vulcan 800 tail lights, brake light, rear turn signals do not work when the ignition switch is in the on position but the lights do work when the ignition switch is set to park.


Hi, MrA sounds like a faulty ignition switch for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $ you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Rear Tail Brake Light Only Lights In Park
Running brake light and turn signals only on in PARK position
KAWASAKI VN800 Service Manual
OEM Parts for Kawasaki
Download Manual 2005 Kawasaki Vulcan 800 Owner Manual

Dec 28, 2016 | 2005 kawasaki VN 800 Vulcan Classic

1 Answer

What would stop rear signals from working on 1997 kawasaki vulcan 800, and should it have two hot wires connected


Hi, Shannon before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced you OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Turn Signal wiring dramas
KAWASAKI VN800 Service Manual
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki/kawasaki-vulcan-owners-manuals

Nov 03, 2016 | 1998 kawasaki VN 800 Vulcan Classic

1 Answer

I have a 2003 kawasaki vulcan classic 1600, the left rear turn signal was broke off. both front and rear turn signals quit working. I bought new signals for the rear, and both still dont work


Hi, Tom before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced you OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www2.vulcanrider.se/DL/Vn1600A1_2_sevman.pdf
OEM Parts for Kawasaki
http://mybikemanuals.com/kawasaki/kawasaki-vulcan-owners-manuals

Oct 05, 2016 | 2006 kawasaki Vulcan 1600 Classic

1 Answer

I have a vulcan 900 custom do i have to splice the wiring to install the rear turn signals or its plug and play


Hi, Phillip if they are OEM should be plug N play otherwise get out your splicing kit and if you are going with LED lights you are going to need a load equalizer sorry you can't find the first and best tool you ever bought for your Kawasaki despair not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
rear turn signal removal
Arlen Ness Badlands Turn Signal Load Equalizer Harley Davidson Models 91...
KAWASAKI VN900 CLASSIC Service Manual
OEM Parts for Kawasaki
http://www.kawasaki-techinfo.net/searchOM_nv.php?view_lang=EN&spec=OC&book_no=&lang_code=

Apr 11, 2016 | Motorcycles

2 Answers

Rear turn signal probem


Have you done any mods lately? Are you using the correct replacement bulbs? Make sure the wiring is not crossed.

Feb 02, 2015 | Cars & Trucks

1 Answer

My turn signals do not work. I have power from my flasher relay to my turn signal switch. At the switch there are 3 wires I assume one is direct power from the battery and the other two are for each...


Hi, Jdbutler03 before diagnosing any turn signal/running light/parking light issue make sure the bulb is good and the light fuse has continuity with a test light. If you have replaced you OEM lights with LED lights you are going to need a load equalizer. If no turn signals work the cause could be a faulty turn signal module or the connector going to it, look for corroded, loose, or broken pins/sockets. Contact spray cleaner is great for removing corrosion. If your speedometer does not function properly it will have to be fixed first because your turn signal module gets the data from the speedometer for normal turn signal function. If your front turn signals don't work use a test light to check for power and ground at the bulb socket, then start backtracking the wiring through every wire connector to the turn signal switch/button and check for continuity, go all the way back to the fuse if necessary to find the cause of the malfunction. If your rear turn signals don't work check your rear fender wiring harness connector first for corroded, broken, loose pins/sockets, power, and a good ground, (the harness connector is usually located under the seat on the front of the rear fender) then keep tracing the wiring look for obvious harness damage caused by the rear tire. If you still can't find the malfunction backtrack from the rear fender wiring harness connector. If one side does not work you could have a faulty turn signal switch or module check for continuity.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Turn signals arent working
turn signal problem
Kawasaki VN 750 Service Manual
OEM Parts for Kawasaki
1994 Kawasaki Vulcan 750 Owner Manual

Apr 22, 2017 | 1992 kawasaki VN 750 Vulcan

1 Answer

How to replace rear turn signal on kawasaki vulcan 1500


Hi, Zack sorry you can't find the first and best tool you ever bought for your Kawasaki despair not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Turn Signal Replacement
Finished Rear Turn Signal Install
http://www2.vulcanrider.se/DL/KawasakiVN1500_87-99ServiceManual.pdf

May 20, 2010 | Motorcycles

1 Answer

Jeep Liberty Left Rear Turn Signal Not Working


sounds like the bulb you have is the wrong resistance the new noen bulbs will do this

Nov 16, 2008 | 2004 Jeep Wrangler

Not finding what you are looking for?
1979 kawasaki KE 125 Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...