Question about 2002 Yamaha XJR 1300 SP
Hi I have a meta 357t alarm fitted to my XJR 1300 there is no led flash at all and can not disarm with remotes
Hi, Marieliz2k3 the answer to this question is way above my pay grade for this situation, I would call or visit my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How to remove META 357 Imobiliser alarm
Yamaha 2002 XJR1300 Service Manual
OEM parts for Yamaha
1999 2003 Yamaha XJR1300 Service Manual Moto Data Project
Posted on May 29, 2017
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: uniden vs1100xr car alarm will
I had the same problem with my vs1100xr. The remotes for these (and other) unidens have a rolling code. Seems to me that either the remote runs out of new codes and cycles back to the beginning, or the alarm base unit somehow loses track of the codes. Either way, the alarm base unit stops accepting the codes of your remote, and so needs to be purged of its code tracking memory - reset, if you like. This is essentially the procedure for training the alarm base unit to recognise new remote (and forgetting old remotes).
This procedure is:-
1) Disarm alarm, or if in valet mode, take it out of valet mode (push valet button 3 times)
2) Turn the ignition on and off 2 times within 15 seconds.
3) Put the alarm into valet mode (push valet button 3 times) within 15 seconds of completing step 2. Alarm should beep, and remote training has started.
4) Within 15 seconds of completing step 3, push the button (#1) of the first remote you wish to use for the alarm. Alarm should beep, indicating acceptance of remote. Repeat for other remotes you wish to use - up to 4 in total. (Once the first remote has been accepted, you have all the time in the world to make the alarm learn other remotes)
5) Turn ignition on and off to end remote learning mode. Alarm should beep 2 times. New remotes have now been learned and previous remotes forgotten.
Some of these details may vary from country to country - who knows. If this doesn't work, I suggest that you contact Uniden in your country to obtain the procedure. Took me a few tries to get the timing right, what with the valet button hard to get at and having only 15 seconds between steps.
Posted on Apr 18, 2009
Locate the valet/override switch (button), (if you can't locate it, try tracing the wires under the dash from the main unit, usually a black and gray or black and red set of wires). Turn key to "RUN" position then press the button, the alarm's LED should light up solid at this time indicating valet mode as been set.
Posted on Jun 20, 2009
if your bike is similar to an fj,you should lift the seat and battery is underneath in its own compartment to remove it,undo the rubber retaining strap the terminals and breather tube,battery lifts out vertically
Posted on Jul 04, 2009
usually after opening the door you can deactivate the alarm by pushing th unlock button or simply insert keyy in ignition and turn it on.
Posted on Aug 13, 2009
Tips for a great answer:
Apr 03, 2012 | 1998 Yamaha YZF-R1
Aug 20, 2011 | 2001 Yamaha YZF-R1
May 29, 2017 | 2007 Aprilia Atlantic 500 Sprint
Oct 15, 2010 | Suzuki GSF 1200 Bandit Motorcycles
Apr 21, 2010 | 2001 Yamaha XJR 1300 SP
Feb 15, 2010 | 2001 Yamaha YZF-R1
Dec 23, 2009 | 2001 Yamaha YZF-R1
Oct 08, 2009 | 2002 Ducati 748 S
Sep 05, 2009 | 2002 Ducati 748 S
135 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: