Question about Suzuki GS 400 E Motorcycles

Open Question

I need tune up specs for a GS450 ie:valve clearance,ignition timing,valve timing.Thanks.

Posted by on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
wayneman01
  • 301 Answers

SOURCE: VALVE CLEARANCE SPECS FOR A 2007 YAMAHA WR250F

The Yamaha manual says: .004" to .006" for the intake and .007" to .009" for the exhaust valves, cold engine. I have included that information, from the manual, below:

f5e49f3.jpg

Posted on Dec 07, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Valve clearances on my rmz 250 2014


Hi, Colin for more information about your question and valuable "FREE" downloads that you will need please click on the websites below. Good luck and have a nice day.
http://www.mxguy.com/downloads/service_manuals/2004_KX250F_Service-Manual.pdf
2004 RMZ 250 Valve Adjustment Part 1
Master List Dirt Bike Valve Clearance Spec
rmz250 dirtbike valve specs and clearance help RM 250

Apr 15, 2016 | Motorcycles

2 Answers

1996 honda will not start under 60 degrees


tune it up. (fresh spark parts work best in cold and for sure damp wheather.
fresh gas?
leaking injectors?
isc stuck closed, and rpm low, hot?

the ecu, anticipates the next cold start,
it knows how much to open the iSC valve, to get a good start cold
and if colder to day, it opens more. (math)
if it (ISC) is gummed up,fas all do, it cant start right
so next time, try %10 throttle, starting, emulating a good ISC.
see?

Jan 07, 2014 | 1996 Honda Accord

1 Answer

I need to know the fireing order on a 2.8l engine in a 1985 ford ranger


Tune Up

Spark Plug

AWSF-42C

Spark Plug Gap

0.044

Ignition Timing

10 degrees BTDC

Firing Order

1-4-2-5-3-6

Distributor Rotation

Clockwise

Valve Clearance Intake

0.014

Valve Clearance Exhaust

0.016

Aug 04, 2011 | 1984 Ford Ranger

1 Answer

What is the difference between hot and cold vavle clearances


When it is stated that valve clearance should be set when hot, you first adjust the clearance on the cold engine after assembly to the hot setting specs if they are the only ones given, then let the vehicle warm up to operating temperature. Then adjust the clearances again.
If it is just a tune-up(undisturbed engine), let the engine warm up to operating temperature, then adjust.
The reason is that metal expands as it heats up, which affects the valve clearance.

Dec 05, 2010 | Toyota Land Cruiser Cars & Trucks

1 Answer

I need to know the valve adjustment procedure and


Valve clearance ideal setting is 0.10mm however as ideal replacement size shims are not always available use tolerance 0.05 to 0.2mm inlet and exhaust Procedure remove tappet cover rotate motor to tdc compression (inlet valve lobe pointing to rear wheel and exaust lobe to front wheel) measure clearance if no clearance depress cam bucket hold down by wedging a screwdriver or suitable tool (allen key) between cam bucket and cam remove shim measure with micrometer an relace with a shim 0.15 thinner depress valve remove wedge and measure clearance (if any) repeat procedure 4 each cylinder if clearance to large replace shim with a thicker one till clearance is in spec

Jul 20, 2010 | 1981 Suzuki GS 750 L

1 Answer

Hi,im looking for valve clearance specs for the kawaski 23hp fh680v-8s10 motor ??


The adjustment is .003 - .005. You must hold the rocker arm by lifting up on the valve depressing side and pressing down on the push-rod side while making the adjustment. Any other means of adjustment and it will be incorrect.

Below is quoted from the service manual without pictures
(FixYa Note TORQUE on lock screws is 61 inch pounds)

Valve Clearance Inspection
NOTE
?? Valve clearance must be checked when the engine is cold (at room
temperature).
• Remove the rocker cover (see Cylinder Head Removal).
• Place the piston at top dead center (TDC) of the compression stroke
turning the crankshaft clockwise facing the flywheel.
No.1 Cylinder:
?? The left projection [A] on the flywheel is faced with the right leg [B]
on the #1 ignition coil [C] as shown.
?? Check the intake and exhaust valves are closed completely, if not turn
the flywheel one turn (360??) clockwise and face the left projection with
the right leg again.
No.2 Cylinder:
?? The left projection [A] on the flywheel is faced with the right leg [B]
on the #2 ignition coil [C] as shown. Follow No.1 Cylinder alignment.
• Then check the valve clearance.
?? Using a thickness gauge [A], measure the valve clearance between
the rocker arm [B] and the valve stem end.
If the valve clearance is incorrect, adjust it.
Valve Clearance (when cold)
Intake, Exhaust 0.075 0.125 mm (0.003 0.005 in.)

Thanks for using FixYa.

Kelly

May 18, 2010 | Garden

2 Answers

Need to know the timing specs for a essex v6 Bakkie and points gap please


INLET VALVE CLEARANCE (HOT) 0,30 mm EXHAUST VALVE CLEARANCE (HOT) 0,55 mm OIL PRESSURE (HOT @ 2000 R/MIN) 280-430 kPa STATIC IGNITION TIMING - SEA LEVEL 14 deg BTDC STATIC IGNITION TIMING - ABOVE 800m 17 deg BTDC CONTACT BREAKER GAP (BOSCH) 0,45 mm DWELL ANGLE 30 ~ 34 deg IDLING SPEED 800 R/MIN FIRING ORDER 1-4-2-5-3-6 SPARK PLUG NGK BPR 6ES SPARK PLUG GAP 0,65 mm

Aug 31, 2009 | 1978 Ford Granada

6 Answers

What is valve clearance for a 250 yamaha timberwolf


what an *******. If I had a manual or my library had one I wouldnt be asking the question. If I need help fixing something dont tell me to go jump in a lake just dont answer

Apr 05, 2009 | 2003 Yamaha YZ 250

2 Answers

Valve specs for VT 500 honda shadow 1983


Hi,
Your valve clearances should be:
Intake .08-.12 mm (.003-.005 in)
Exhaust .12-.16 mm (.005-.006 in)
I usually start all gaps in the middle of given specs, then fine tune from there.
Hope this helps

Mar 15, 2009 | 1984 Honda VT 500 C Shadow

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Richard
Richard

Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...