Question about 1988 Honda XR 600 R

Open Question

How do i change the spark plug and what size is it

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you change spark plugs on 1.4 hyundai engine ?


Take off the engine cover. Then remove the ignition cable from the spark plug. Then place a sparkplug wrench in. Be sure you have the right size. Consult your owner's manual for the right spark plug size.

Aug 16, 2014 | Hyundai i30 Cars & Trucks

1 Answer

What size torque driver do ineed to change spark plugs 2007 jeep compass


im guess this is a socket size? question?
open hood look up see spark plugs used.
now you have them in hand right? buy them at the counter
and then grab a socket that fits?
or if no in a store. you say plan to buy ngk plugs
you go online look at, NGK.com and the spark catalog
look up your plug, and see the spec page there and behole
all NGK sparks are list for socket size there.
i do that, see V-tech plugs.
ZFR5F-11 #
i goggle that (lazy) and get hex size
it shows.

2nd hit
see spec tab . click that

http://www.ngk.com/product.aspx?zpid=10210


Aug 08, 2014 | 2007 Jeep Compass 2.4

1 Answer

How to change spark plugs on a 2001 jeep wrangler 4 lr. engine


Remove spark plug leads, get the right sized deep socket and unscrew old spark plugs, screw in new spark plugs, plug in spark plug leads, DONE!

Oct 09, 2012 | 2001 Jeep Wrangler

1 Answer

How to change spark plug


buy the compatible spark plug ( the size and the model is written on the spark plug) . remove the the cover on the spark plug change it , easy ;-)

Mar 14, 2012 | 2008 Honda CBR 600 RR HANNspree Ten Kate...

1 Answer

How do you change the spark plugs?


To change the spark plug on chain saw or any small engine >>
> pull off the spark plug wire
> use a socket wrench (like mechanics use on cars)
> select right size socket (buy at hardware store
> the hardware store might remove the spark plug for you
> rotate spark plug counterclockwise to remove
> identify correct spark plug (buy at hardware store/ home center in lawn and garden section)
> Install new spark plug
> push spark plug wire back onto spark plug

Oct 10, 2010 | Poulan Wild Thing 18" 40cc Gas Chainsaw -...

1 Answer

Can a home mechanic easily change a 1997 Eldorado's spark plugs and wires? Is there anything I need to know - good/bad, hints, etc?; any advice please. I was told this is too difficult to do with...


NORTHSTAR 4.6 ENGINE REMOVE INTAKE MANIFOLD SERVICE COVER FROM THE ENGINE.SPARK PLUGS IN THE VALVE COVER BUT THE SPARK PLUGS NOT HARD TO CHANGE.YOU NEED A LONGER SPARK PLUG SOCKET OR YOU USE REGULAR SIZE PLUG SOCKET USING LONGER EXTENSIONS.YOU NEED SPARK PLUG BOOT PULLER.YOU NEED A UNIVERSAL JOINT.BESURE TO GET PIECE RUBBER HOSE 10 INCHES OR WHAT EVER SIZE PLACE HOSE OVER SPARK PLUGS FOR THE HARD TO REACH SPOTS TO HELP AID SPARK PLUG BACK IN WITHOUT STRIPPING THE THREADS.HOPE THIS HELP.

Aug 05, 2010 | 1997 Cadillac Eldorado

1 Answer

How to change spark plug on lexuse gs300 2003


Hi, You need a new Spark Plugs Spark Plug Wrench Socket wrench Extension (At least 2-3 inch) size 10 socket size 12 socket...
First thing you need to do is find out where the spark plug cover is. Once you figure that out there will probably be size 10 or/and 12 bolts honding it down. Take that off and there you will see sensors connecting to each other and holding the spark plug in the cylinders. Unplug all the sensors and pull out the circular plugs holding the spark plugs down. THey might be a little tight and hard to get out so you're going to need to give it a good tug. Once you pull them out MAKE SURE YOU DONT DROP ANYTHING INTO THE CYLINDERS. You can look down into them and see the spark plugs. Get your spark plug wrench, extension, and socket wrench and stick them down in and push so that the spark plug wrench grabs them. Just simply unscrew the plugs, pull them all out, and then put the next ones in, and tighten them down. Just connect all the sensors, and put the cover back on and you're done. Pretty simple.
Take care

Jul 23, 2010 | 2003 Lexus ES 300

1 Answer

CHANGE SPARK PLUGS 2004 GMC ENVOY


Well first you will want to get the right size spark plug socket , the rigt sized one for your envoy and then next you will want to remove one spark plug wire at a time so you do not cross any of the wires or if you do you will mess up the timing for the envoy now how to remove a spark plug wire, look first at the plug wire and then gentky twist the wire on the end that goes over the spark plug and carefuly pull back but do not break the wire, next with an extention and the socket put the socket over the spark plug and turn the plug counter clock wise until you have removed the plug and then put the new spark plug in and place the spark plug wire back on the spark plug and just repeat the prosses on the rest,agin do them one at a time that is how I change spark plugs and wires and i have been doing it for years.

Sep 15, 2009 | 2004 GMC Envoy

1 Answer

How to change the spark plugs


if its your first time you need a haynes repair manual.you need a spark plug boot puller.you need 3/8 ratchet wrench.spark plug sockets.from size 5/8 to 13/16.you probably need size 5/8 socket.you need extensions different sizes.and universal joints.to reach hard to get plugs.you need torque wrench. and spark plug gap set.

Jul 07, 2009 | 2002 Kia Sportage

1 Answer

How to change spark plugs... 2003 ES300


Hi!

You need New Spark Plugs, Spark Plug Wrench Socket and Wrench Extension (at least 2-3 inch) size 10 socket and/or size 12 socket.
First of all, please check where the spark plug cover is. Once you figure that out there will probably be size 10 or/and 12 bolts holding it down. Take that off and there you will see sensors connecting to each other and holding the spark plug in the cylinders. Unplug all the sensors and pull out the circular plugs holding the spark plugs down. Pull them out and make sure that you don't drop anything into the cylinderes. You can look down into them and see the spark plugs. Get your spark plug wrench, extension, and socket wrench and stick them down in and push so that the spark plug wrench grabs them. Then unscrew the plugs, pull them out and put the next ones in and tighten them down. Just connect all the sensors, and put the cover back on.

Thanks for using FixYa and do rate if found this solution helpful.

Thanks
Rylee

Mar 27, 2009 | 2003 Lexus ES 300

Not finding what you are looking for?
1988 Honda XR 600 R Logo

Related Topics:

24 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76673 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...