Question about Honda CG 125 Cargo Motorcycles

1 Answer

How to assemble clutch lining? - CG 125 Cargo Honda Motorcycles

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 491 Answers

There are different styles of motorcycle clutches, depending on whick bike you have.
Here is alink to doing a wet clutch on a VTX 1800, it will give you a look at one style.

http://www.bareasschoppers.com/clutch

Check you tube for other instructional videos

Posted on Oct 13, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 Pontiac Bonneville GXP will not shift into 4th gear I was to it was a fourth gear band but is that the only problem that will cause itI'notto shift into 4th gear


Which transmission does yours have 4T65-E or 4T80-E ?

4T80-E
No Fourth Gear

Checks

Causes

1-2 Shift Solenoid Valve
?€¢
Inoperative
?€¢
Debris
?€¢
Pinched wires

3-4 Shift Valve Bore Plug

Misassembled

4th Band

Burned, slipping, missing

4th Servo Cover

Cracked

4th Servo Pin

Broken, seized

4th Servo Piston

Damaged

4th Servo Seals

Rolled, cut or damaged
4T65-E
Slipping or No Fourth Gear
Slipping or No Fourth Gear Checks
Cause

DEFINITION: A large engine RPM increase is noted in fourth gear, Drive range, with little or no vehicle forward speed increase. First, second, and third gear operation are normal. Shifts into fourth gear are soft or do not occur. Fourth gear ratio is 0.705:1.

Automatic Transmission Fluid Level
Low fluid level

Transmission Main Line Pressure
Low transmission main line pressure

Oil Filter Assembly
• The oil filter assembly (100) is missing, plugged, or damaged.
• The oil filter seal assembly (101) is missing or is damaged.

Control Valve Body Assembly
• The 3-4 shift valve (362) or the 4-3 manual downshift valve (360) is stuck or binding.
• Debris is found in the passages of the control valve body (301) or of the control valve body spacer plate and gasket assembly (396)

Case Cover Assembly
Distortion or damage occurs at the manual valve (404) or at the case cover (401), causing PRN oil leak.

Driven Sprocket Support Assembly
A plugged third clutch oil passage in the driven sprocket support assembly (609)

Fourth Clutch Assembly
• The clutch plates (500-502) are worn, damaged, or misassembled.
• A missing or not seated fourth clutch spring retaining ring (601)
• A damaged spring assembly (602) or piston (603)
• Worn or damaged fourth clutch piston seals (604, 605)

Third Clutch Sprag Assembly
• The sprag (720) was misassembled or backwards on the inner race (661).
• A damaged third clutch sprag assembly (653, 661, 719-721)

Dec 06, 2015 | Pontiac Cars & Trucks

2 Answers

How do i replace a clutch on a 2008 scion xb


There is a video about this on line

I would suggest that you get a paperback repair manual like a Haynes to help you if you do it yourself. Or sign up at Autozone.com and see if they have any downloadable free guides specific to XBs. Autozone won't spam you for signing up.

Feb 07, 2015 | 2008 Scion Xb

1 Answer

Replace clutch lining


you do not replace the clutch lining. You replace the whole assembly in what is called a clutch kit.. You get a new clutch plate --pressure plate and throw out bearing. Depending on the make and model they are generally around $400 dollars and the rear box has to come out.. You will need somebody who has done clutches before or get a shop to do the job . Shop around to get quotes

Feb 24, 2014 | Toyota Corolla Cars & Trucks

1 Answer

I have a Whirlpool Ultimate Care II LSQ7533JQ1 washing machine. It agitates and drains but does not spin. I checked the motor coupling is not worn out nor broken. This is a two speed washing machine. ...


This is a neutral drain direct drive machine which drains the water first prior to spinning. After draining out the water completely, the motor pauses then restarts to spin the tub. It is possible that the problem is in the lid switch. If the motor is running during the spin cycle then the lid switch is good, otherwise it is indeed the problem.

The problem can be either in the brake particularly the cam driver or the clutch assembly. The clutch hub is attached to the spin pinion gear and as the spin pinion gear turns, the clutch hub also turns. The clutch lining is forced against the clutch hub by the clutch spring. As the clutch hub turns, friction between it and the clutch lining causes the clutch lining to turn. As the clutch turns, the tab that holds the clutch spring on the lining, contacts the brake cam driver, releasing the brake. The tab on the clutch lining remains in contact with the brake cam driver, holding the brake released and then providing power to the spin tube through the brake release.
jahn27_58.jpg
jahn27_59.jpg

The basket will not spin if the brake cam driver is broken because the brakes cannot be released. If the clutch spring is weak, the friction between the clutch hub and the clutch lining is not sufficient for the clutch tab to push the cam driver and release the brakes.

Check and replace, if necessary, the brake cam driver and the clutch assembly particularly the clutch spring and the clutch lining.

Dec 30, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

My clutch pedal lost pressure. How do I fix it?


either the master, the slave, or the line has failed. there could be a new replacement assembly of all three assembled and pre-bled out for you. the car is over ten years old, all three should be replaced anyway. go to a parts store and buy a clutch master, clutch slave, and take them to a repair shop. they will install them and make you a new line if yours has failed. check and see if there is a pre-bled assembly which will cut down a bit on the installation labor cost.

Dec 28, 2010 | 1997 Honda Civic

1 Answer

I am getting a P1481 code, From what I see it could be the Fan Clutch, but would it also cause it to shift at a higher RPMs, It only does it some time.


OK, loss of cooling fan speed. I will say this is plausible. I'll take your word for it (sometimes my online resource is not complete).

prev.gif next.gif Cooling Fan & Shroud Removal & Installation To Remove:
  1. Drain the coolant from the engine.
  2. Remove the air cleaner assembly from the engine compartment.
  3. Remove the air resonator assembly from the engine.
  4. Remove the inlet radiator hose from the radiator.
  5. Detach the transmission oil cooler lines from the fan shroud.
  6. Disconnect the fan clutch connector. Fan clutch removal and installation gm-03-00-1477.gif

  7. Use a J 46406 fan clutch remover and installer to remove the fan clutch from the water pump.
  8. Remove the upper mounting bolts from the fan shroud.
  9. Remove the fan shroud from the radiator by lifting the shroud and pushing inward.
To Install:
  1. Attach shroud to the radiator. Torque the bolts to 21 ft-lb (28 Nm).
  2. Use a J 46406 fan clutch remover and installer to install the fan clutch onto the water pump.
  3. Connect the fan clutch connector.
  4. Attach the transmission oil cooler lines to the fan shroud.
  5. Install the inlet radiator hose to the radiator.
  6. Install the air resonator assembly onto the engine.
  7. Install the air cleaner assembly into the engine compartment.
  8. Refill the engine with coolant.
prev.gif next.gif

Jul 22, 2010 | 2003 Chevrolet TrailBlazer

1 Answer

Is the clutch slave cylinder internal or external of transmission?


external if it's like my 1979 Honda. Internal if like the following information:
Slave Cylinder on 1999 Chevrolet Cavalier
REMOVAL & INSTALLATION
  1. Disconnect the negative battery cable.
  2. Detach the master cylinder assembly from the actuator cylinder by disconnecting the hydraulic line.
  3. Remove the transaxle assembly, as outlined earlier in this section.
  4. Remove the clutch actuator cylinder from the transaxle. Fig. 1: Clutch actuator cylinder assembly mounting 91147g02.gif
    To install:
  5. Lubricate the inside diameter of the bearing with clutch bearing lubricant GM part no. 12345777 or equivalent.
  6. Install the actuator cylinder in the transaxle, then install the transaxle assembly.
  7. Connect the master cylinder-to-actuator hydraulic line.
  8. Bleed the hydraulic system, as outlined later in this section.
  9. If removed, install the air intake duct.
  10. Connect the negative battery cable.
prev.gif next.gif

Jun 20, 2010 | 1999 Chevrolet Cavalier

2 Answers

Very hard to find nuetral any ideas?


Clutch assembly needs adjustment or if can't replaced the clutch lining possible worn out.

May 27, 2010 | 2000 Harley Davidson FLHR-FLHRI Road king

1 Answer

Line up of trans to motor doing clutch replacement 88 dodge ram


Leave your clutch assembly bolts loose, so the clutch plate can move as needed to line it up, then tighten them after tranny fully in place. I believe most autoparts store now will lend or rent you an alignment tool if necessary. I guess I was lucky, I always seemed to find something I could use to align it by eye.

Nov 16, 2008 | 1988 Dodge Ram 50

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

143 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...