Question about Harley Davidson FLHTC - FLHTCI Electra Glide classic Motorcycles

1 Answer

My 1991 Harley Davidson FLH all lights go on when the bike is in the ignition position when I hit the brakes and when i put it in the light position the lights light up but the break lights don't come on? Any idea...

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Harley Davidson Master
  • 4,514 Answers

Chec wiring carefully for looseness or flaws-old bike--bulb cud be bad--buy a repair manual

Posted on Oct 11, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2000 flh that i turn to fuel up and then it wouldn't start. It has power to instrument panel and brake light,it will not even crank


Hi, Sam and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty starter button/switch.
6. Faulty jiffy stand or clutch pull in switch/sensor.
7. Security alarm needs a reset.
8. Starter control circuit, relay, fuse, or solenoid faulty.
9. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and downloads that you will need please visit the websites below, and for specific information or questions please feel free to contact me at xlch@mail.com. Good luck and have nice a day.
FLHT won turnover start Harley Davidson Forums Harley Davidson Motorcycle...
Harley Davidson Manuals Mark Workshop
http://www.stcharlesharleydavidson.com/OEMpartfinder.htm
Owner Manuals Harley Davidson USA

Feb 02, 2016 | Harley Davidson FLHTCUI Electra Glide...

1 Answer

2003 Fatboy Electrical Issues


Hi Dee, and the usual suspects are:
1.Ignition/Light Key Switch not in IGNITION position.
2.Engine Stop switch in the OFF position.
3.Discharged battery, loose or corroded connections check negative cable at BOTH ends. (solenoid chatters).
4. Bank Angle Sensor tripped and Ignition/Light Key Switch not cycled to Off and then back to on.
5. Starter control circuit, relay or solenoid faulty.
6. Electric starter shaft pinion gear not engaging or over-running clutch slipping.
7. Security alarm not disarming
For a prime suspect please visit website below and good Luck.
Big Twin Carb EFI DTC Intructions codes Harley Davidson Forums Harley...

Apr 10, 2013 | 2003 Harley Davidson FLSTF Fat boy

1 Answer

1982 flh hard to start new starter,battery,everything new cranks real hard


Check your conections earth and positive wire,or starter motor brushes need replase.

Sep 29, 2012 | Harley Davidson FLHTCUI Electra Glide...

1 Answer

1998 833 sportster- cAN'T START AFTER RIDE


Hi Linda, and the usual suspects are:
1.Ignition/Light Key Switch not in IGNITION position.
2.Engine Stop switch in the OFF position.
3.Discharged battery, loose or corroded connections (solenoid chatters).
4. Bank Angle Sensor tripped and Ignition/Light Key Switch not cycled to Off and then back to Ignition
5. Starter control circuit, relay or solenoid faulty.
6. Electric starter shaft pinion gear not engaging or over-running clutch slipping.
For a prime suspect please visit website below:
Good luck
Harley Davidson Sportster error codes and how to access them

Jun 25, 2012 | Harley Davidson XLH Sportster 883 Hugger...

1 Answer

When my lights on are on my brake lights do not work, when the lights are off,when I hit the brakes all lights light up?


Hi Bob, call, take a ride or trailer your bike over to your local dealers service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary/possible and offer professional advice and assistance concerning your issue. Good luck have a nice day.

Jun 14, 2012 | Harley Davidson FLHTC - FLHTCI Electra...

1 Answer

93 flh wont start. no starter clickin n no spark


Hi Sdrnr86, and the usual suspects are:
1.Ignition/Light Key Switch not in IGNITION position.
2.Engine Stop switch in the OFF position.
3.Discharged battery, loose or corroded connections check negative cable at "BOTH" ends. (solenoid chatters).
4. Bank Angle Sensor tripped and Ignition/Light Key Switch not cycled to Off and then back to on.
5. Starter control circuit, relay or solenoid faulty.
6. Electric starter shaft pinion gear not engaging or over-running clutch slipping.
7. Security alarm not disarming
For a prime suspect please visit website below. Good luck and have nice day. Harley Davidson Wiring Diagrams and Schematics
Set Change Override Transport Harley Security Alarm PIN Code No Key Fob...

Sep 09, 2011 | Harley Davidson FLHT Electra Glide...

1 Answer

No power to brake light on a 95 FLH


Check the rear brake light switch. To find it, find the metal brake line coming out of the rear master cylinder going to the rear brake. Follow this line and underneath the bike you'll find a tee fitting with a pressure switch. This is the rear brake light switch. With the ignition switch on, one of the lugs on the switch should have voltage on it. If not, trace the wire back to the switch looking for a break. If it does, the switch is probably bad but you should have a front brake light switch as well. It should work even if the rear switch doesn't. If this is the case, either the front switch is bad as well or you have a wiring problem going back to the rear brake light.

Good Luck
Steve

May 23, 2011 | Harley Davidson FLHT Electra Glide...

1 Answer

Need diagram on how install rebuild kit in 1973 Harley FLH rear master cyclinder.


Take the master cylinder off the bike. There is a snap ring in the plunger bore of the master cylinder. Take the pieces out of the master cylinder and place them in a line in the order and direction that they came out. Hone or clean the bore of the master cylinder out and install the new parts back in the same way the old parts came out. It's not that difficult. There is one part, a valve, that goes in your master cylinder because you have a drum brake on the rear. If you had a later model with a disc brake, you would leave this part out. For a picture, go to Bike Bandit . com.
flh-80/o/m900#sch189918">http://www.bikebandit.com/1973-harley-davidson-flh-80/o/m900#sch189918

Good lLuck
Steve

Apr 27, 2011 | Harley Davidson FLHT Electra Glide...

1 Answer

1998 harley davidson cuts out when bike gets warm


Check the ignition, pull the points cover off and then put a heat gun on the ignition and heat it up to see if the bike will cut out. I know you replaced the coil if you can check it again to see if you have 12 volts coming and in and out of the coil after you get it to fail just to double check thats the problem.

May 16, 2010 | Maisto HARLEY DAVIDSON MOTOR CYCLE 1998...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

160 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...