Question about 2000 Harley Davidson FLSTC Heritage Softail Classic
Hi Lewis3705, please be aware that this question has already been asked and answered. Thank you
Posted on May 26, 2015
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
You CANNOT disarm the alarm without a PIN. One option is to buy a new key fob and set up the alarm using the new fob. Second, there is a chance the fob has fallen out of synchronization with the alarm by being accidentally pressed repeatedly in your pocket. You can try resetting it by HOLDING THE BUTTON DOWN FOR 15 SECONDS until the alarm responds with 2 turn signal flashes. After confirmation(flashes), you can resume normal alarm operation. Use your manual and set the alarm up WITH A PIN, so if your fob croaks again you can arm/disarm the alarm.Harley alarms are good, but notoriously hard to set up and troubleshoot!!!
Posted on Oct 10, 2009
It does. Often when you disconnect the battery you alarm needs re calibrated. Check your owner's manual for the proper procedure if this does not work...Hold your key fob button down for 20 seconds or so. This MAY re-sync the alarm, but not always.
Posted on Dec 03, 2009
You'll need the PIN number.
If you don't know it, you'll have to change it to a 5 digit PIN number you select.
With the fob present, turn IGN switch:
Press LEFT turn signal switch 3 TIMES
Press RIGHT turn signal switch 1 TIME and release
Turn signals will flash 3 times. Current PIN will appear in odometer. The first digit will be flashing.
If changing PIN, enter first digit (a) of new PIN by pressing LEFT signal switch (a) time(s) i.e., for the number 1, press one time. for the number 5, press 5 times.
Press RIGHT signal switch 1 TIME and release.
the new digit (a) will replace the current in odometer window.
Enter second digit (b) with LEFT signal switch.
Repeat until PIN is set.
Once PIN is set (either new or old PIN), to disarm security system, DO NOT sit on seat, lift bike off kick stand, or anything else that will activate the security mode!
Turn IGN to IGNITION.
Quickly (within 2 seconds) hold BOTH turn signal switches until confirmation signal (KEY icon flashes at fast rate, in odometer window, a flashing "-" will be followed by 4 more dashes = "----")
Enter 1st digit (a) in PIN by pressing LEFT turn signal switch (a) times (i.e., 5 times for the number 5)
The 1st "-" will become the 1st digit (i.e., "5")
Press RIGHT switch signal 1 TIME.
The 1st digit is stored and the dash will flash.
Enter 2nd digit (b), and repeat sequence until done.
After the 5th digit is entered, the KEY icon stops blinking, and the system is disarmed.
The system will stay off until the IGN switch is turned off.
If at any time during disarming sequence an error is made, wait 2 minutes before trying again.
Posted on Dec 15, 2012
Tips for a great answer:
Feb 18, 2014 | Harley Davidson Motorcycles
Apr 20, 2013 | 2005 Harley Davidson FLSTC - FLSTCI...
Feb 28, 2013 | 2007 Harley Davidson FXSTC Softail Custom
Feb 26, 2013 | 2003 Harley Davidson FXDX Dyna Super Glide...
Nov 15, 2012 | Harley Davidson FLHRI Road King...
Oct 10, 2010 | 2000 Harley Davidson FLSTC Heritage...
Jan 15, 2010 | 2006 Harley Davidson FLHRI Road King
Sep 05, 2009 | Harley Davidson FLSTFI Fat Boy Motorcycles
Jul 16, 2009 | 2000 Harley Davidson FLSTC Heritage...
Jun 19, 2018 | Motorcycles
395 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: