Question about Harley Davidson FXDL Dyna Low Rider Motorcycles

1 Answer

My 98 dyna low rider I'm trying to remove and replace the fork lock cylinder and I have the and the lock works. I have removed the set screw and cylinder will only move out a little bit. Do I force it out I've tried turning forks and turning key but will not come out all the way.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

You have to loosen the upper triple clamp pinch bolts and remove the upper triple tree and handlebars. Loosen the fork stem bolt and let the fork stem drop down approx. 5 inches. Then your lock will come out.

Note: On the left side of the steering stem there is a "half-moon" indentation that has been machined into the steering stem for the lock. Let the steering stem drop until this indentation is in full view.

Right out of the book.

Good Luck
Steve

Posted on Oct 08, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace my clutch cable on a 98 dyna low rider


You will have to replace the entire cable. Also buy a transmission side cover gasket because you have to take the cover off to replace the cable.

Aug 12, 2012 | Harley Davidson FXDL Dyna Low Rider...

1 Answer

Harley Davidson 2006 FXDLI Dyna Low Rider fuse box


Hi Anonymous, on a Dyna all fuses, circuit breakers, relays, and modules will be behind the left side panel cover secured by grommets, four nuts or screws. On later models the electrical panel bracket cover secured by four nuts or screws must also be removed to gain access to electrical components. Good luck and have nice day.

Jun 11, 2012 | 2006 Harley Davidson FXDLI Dyna Low Rider

1 Answer

How do i lock my forks on a 2008 dyna low rider


Hi Ross, take a ride or drive over to your local dealers service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary and offer professional advice and assistance concerning your issue. Have a nice day.

Nov 02, 2011 | 2008 Harley Davidson FXDL Dyna Low Rider

1 Answer

What is the diameter of fork s on a 1997 FXDL


I do not have a repair manual in front of me but from what I recall the Dyna Low Rider forks where 35mm but later changed to 39mm.

Mar 02, 2011 | 2000 Harley Davidson FXDL Dyna Low Rider

1 Answer

Fuse box on 02 low rider


Hi Strange7daze, on a Dyna all fuses, circuit breakers, relays, and modules will be behind the left side panel cover secured by grommets, four nuts or screws. On later models the electrical panel bracket cover secured by four nuts or screws must also be removed to gain access to electrical components. Good luck and have nice day.

Jun 14, 2010 | 2002 Harley Davidson FXDL Dyna Low Rider

1 Answer

2002 FXDL Dyna Low Rider: I want to replace the mirrors on my '03 FXDWG. Do ...


simply put yes. When you reinstall you will use the jam nut to lock the mirror in place.

May 18, 2010 | 2002 Harley Davidson FXDL Dyna Low Rider

3 Answers

How do i drain the fork oil on my 2005 dyna fxd


There should be a drain plug on the trailing side of the slider. Some have cross point screwdriver heads on the plug others have allen or hex head plugs. Remove the plug and work the forks up and down. If all fails, you can remove the entire tube and turn it upside down.

Apr 22, 2010 | 2005 Harley Davidson FXDL - FXDLI Dyna Low...

1 Answer

2008 dyna lowrider run switch will not activate,


"The two small hydo lines entering it seem to be loose and spring loaded turn screw is also loose"

I think you're referring to the two throttle cables and the throttle lock screw on the bottom of the throttle mechanism.

The "run/stop" switch is located inside the switch housing on the throttle side. It has three wires running to it. If the switch does not work, it may be defective.

To replace the switch, you must remove the two bolt that hold the switch halves together. Carefully seperate the two halves. the "Run/Stop" switch is in the front half of the switch housing. The switch is held in by a couple of small screws. Remove the switch and unsolder the wires taking note of which wire goes where. Resolder the wires to a new switch and install the switch in the housing. Reassemble housing keeping it positioned up firmly against the front brake master cylinder. Check the throttle for proper operation prior to starting the engine.

Apr 09, 2010 | 2003 Harley Davidson FXDL Dyna Low Rider

1 Answer

93 Dyna low rider fork oil.


your local hd shop should be able to answer this for you as its a mesured amount and to much or too little will make the bike not handle right

Sep 05, 2009 | 2004 Harley Davidson FXDL - FXDLI Dyna Low...

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

387 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...