Question about 2001 Honda CBR 929 RR Fireblade

1 Answer

What tool do i use to remove the ignition of a Honda CBR? for the two bolts underneath fastening the ignition to the triple clame.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

Two screws hold the contact base on(electronics of the switch). That may be all you need to take off to replace the bad part of the switch if that is the part that is broken. If the tumblers or broken , It say that the body of the switch is held on by one way bolts. You may have to grind or drill these off. If you can get them off you can always replace them with user friendly bolts. If some one really wants your bike they will pick it up and take it , then they can work on it in the privacy of there own shop. Most anti theft gimmicks only keep honest people honest.

Posted on Oct 06, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove the ignition switch on a 2008 CBR600rr.


Hi, Coy08cbr600rr for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Honda, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
how to remove ignition switch
How do you remove 2005 cbr 600rr ignition switch
2007 2009 Honda CBR600RR Service Manual Moto Data Project
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR600RR 2007 Owner Manual

Jan 04, 2017 | 2008 Honda CBR 600 RR

1 Answer

When removing the top triple clamp from a93 Zzr 600 e1 how do I remove the blind bolts from the bottom of the ignition barel ? Where the wiring is located ?


They are shear bolts...the heads are designed to snap off when first fitted to make it hard to remove them for security reasons . Usual method of removal is to drill them out and replace them with cap heads.

Nov 21, 2015 | kawasaki ZZR 600 Motorcycles

1 Answer

2004 Honda CB 1300 front sprocket removal


Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
18T 530 Front Sprocket For Honda CB1300 CB 1300 2003 2007 2004 2005 2006...
Honda CBR 1000RR Chain and Sprocket Replacement Rear Wheel Removal
http://members.iinet.net.au/~cbr/CB1300.pdf
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB1300 Owner Manual

Apr 15, 2014 | 2004 Honda CB 1300

1 Answer

Ignition wire diagram for 1999 honda cbr 900rr


Hi, Ibeonitallda for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Ignition wire diagram for 1999 honda cbr 900rr Google Search
wiring diagram for honda cbr 900rr
Honda CBR900RR Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR900RR Fire Blade Owner Manual

Apr 06, 2013 | 1999 Honda CBR 900 RR Fireblade

1 Answer

What is the torque specs for head bolts on a CBR 900 RR


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Head bolt torque specs CBR Forum Enthusiast forums for Honda CBR Owners
http://www.fireblades.org/forums/honda-fireblade/5000-98-900-torque-specs.html
Honda CBR900RR Service Manual
http://www.partsfish.com/page/oem-parts-for-honda
Honda CBR900RR Fire Blade Owner Manual

Mar 02, 2013 | 1993 Honda CBR 900 RR Fireblade

1 Answer

How do i set the timing on the cbr 600 rr


Hi, Topbiker20 for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
http://www.fireblades.org/forums/general-discussion/103738-how-do-set-ignition-timing-cbr-600-a.html
cam timing on 2003 cbr600rr CBR Forum Enthusiast forums for Honda CBR...
2003 2004 Honda CBR600RR Service Manual Moto Data Project
http://www.partsfish.com/page/oem-parts-for-honda
Honda CB Owners Manuals

Oct 14, 2010 | 2003 Honda CBR 600 RR

1 Answer

How to take the ignition off to key key code number on a 1995 Honda VF750 Magna


Remove the tank and the top triple clamp. You might need to buy a security tip for the bolts under the triple clamp. Chaz Moto Dc

Jan 21, 2010 | 1995 Honda VF 750 C Magna

1 Answer

BMW 328i Starter how to replaice


1999 BMW 328I 2.8L EFI DOHC 6cyl

Starter - Removal & Installation

The starter motor on some models is very difficult to see from the top of engine compartment as it is covered by the intake manifold. On these models, without removing the intake manifold, the starter motor must be removed from underneath the vehicle. Because the starter motor mounting bolts are not easy to access, a long extension with a universal joint mounted on a proper sized socket could be used. A three foot transmission extension is commercially available from tool vendors that has a 3 / 8 inch drive of the driven end and 1 / 2 inch drive on the drive end. If used with a non-binding impact universal joint and a proper fitting impact socket, the starter motor fasteners can be removed from underneath the vehicle.
Once the starter motor fasteners are removed, the starter motor may have to be moved side-to-side several times to loosen the dowel pin if it has corroded in place.

NOTE When the battery is disconnected, the radio code, on-board computer and clock settings will be lost. The radio code should be obtained before disconnecting the battery or radio. Once the battery has been reconnected, the radio will not function unless the code is keyed in.
Starter motor electrical terminal fastener torque specifications for all models:
M5 terminal fasteners: 44 inch lbs. (5 Nm)
M6 terminal fasteners: 53 inch lbs. (6 Nm)
M8 terminal fasteners: 115 inch lbs. (13 Nm)
Starter motor mounting fasteners:
Hex head bolts: 36 ft. lbs. (49 Nm)
Torx bolts: 32 ft. lbs. (43 Nm) Starter motor electrical terminal fastener torque specifications for all models:
M5 terminal fasteners: 44 inch lbs. (5 Nm)
M6 terminal fasteners: 53 inch lbs. (6 Nm)
M8 terminal fasteners: 115 inch lbs. (13 Nm) Starter motor mounting fasteners:
Hex head bolts: 36 ft. lbs. (49 Nm)
Torx bolts: 32 ft. lbs. (43 Nm) E36 6-Cylinder Engines
Automatic Transmission Models
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Set the ignition switch to the OFF position.
  3. Disconnect the negative battery cable.
  4. Remove the climate control air intake duct at the rear of the engine compartment as follows:
    1. Release the grille clips at the rear and lift the grille upward from the rubber seal, then remove the seal.
    2. Remove the two self tapping Phillips screws from inside the duct to release the electrical harness housing.
    3. Press the electrical housing downward to expose and remove the two hex head self tapping screws on each side of the duct and lift the duct up and out of the engine compartment.
  5. Remove the intake manifold trim and valve cover trim covers.
  6. Disconnect the ignition coil electrical connectors and ground straps, label for reinstallation and place aside.
  7. Remove the two fasteners that secure the fuel injection electrical connector harness to the rail. Remove the harness and carefully place aside toward the back of the engine compartment behind the right side strut tower.
  8. Remove the intake manifold.
  9. Remove the electrical leads from the starter motor and place aside.
  10. Remove the starter motor mounting fasteners at the transmission bell housing, then remove the two mounting nuts at the L-shaped mounting bracket.
  11. Loosen the L-shaped bracket to engine block mounting bolt slightly, then remove the bolt while supporting the starter motor.
  12. Remove the bracket, then lift the starter motor upward away from the engine.
  13. Visually inspect the starter pinion and ring gears for any signs of damage.
  14. Installation is in reverse order of removal.
Manual Transmission Models
  1. Before servicing the vehicle, refer to the Precautions section.
  2. Set the ignition switch to the OFF position.
  3. Disconnect the negative battery cable.
  4. Raise and safely support the vehicle.
  5. Remove the fasteners for the reinforcement mounted between the frame rails just behind the rear lower control arm bushing brackets. Mark the bar-s direction for proper reinstallation and remove the bar.
  6. Remove the fuel line cover located near the left side rear lower control arm bushing bracket.
  7. Release the fuel lines and reverse light wiring from their routing brackets.
  8. Note the routing of the starter motor electrical wires, remove the wire mounting nuts, and place the wires aside.
  9. Remove the top and bottom starter motor to engine-transmission mounting fasteners.
  10. Remove the two mounting nuts at the L-shaped mounting bracket.
  11. Loosen the L-shaped bracket to engine block mounting bolt slightly, then remove the bolt while supporting the starter motor.
  12. Remove the bracket and carefully lower the starter motor downward away from the engine.
  13. Visually inspect the starter pinion and ring gears for any signs of damage.
  14. Installation is in reverse order of removal.

Fig. A view of the starter motor mounting fasteners and dowel pin. The mounting bolts are threaded into the starter motor

cd45991.jpg

Fig. The starter motor mounting bolts are a different size than the transmission-to-engine mounting bolts

2cbfa11.jpg

I hope help you with this (rated this help) Good luck.

Sep 22, 2009 | 1999 BMW 328 Series

1 Answer

Hona CBR 125r exhaust


remove the belly pan,undo the radiator there are 2 bolts either side of the manifold undo these and the bolt at the rear near the silencer. the exhaust should now be able to be removed.

Mar 11, 2009 | 2004 Honda CBR 125 R

1 Answer

Remove ignition


You need to remove both handle bars, then the big bolt on the youlk. Remove the yolk and you will see the ignition is attached to that with 2 screws. Make sure youa are carefull with the ball bearings and grease them when you put it all back together.

Nov 10, 2008 | 2006 Honda CBR 125 R

Not finding what you are looking for?
2001 Honda CBR 929 RR Fireblade Logo

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

75197 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...