Question about 2007 BMW R 1200 GS Adventure

1 Answer

How do I replace the clutch of my 2007 1200 GS Adventure?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert whose answer got voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 113 Answers

Is your clutch slipping?? Is there an oil leak between the engine/trans?

Replacing the clutch on a R1200GS is a bit involved unless you are very mechanically skilled. You basically split the bike in half to remove the transmission and gain access to the clutch. You need a means of supporting the front half of the bike under the engine while you remove the back half of the bike. Disconnect electrical harness from the rear, disconnect brake lines to the rear of the bike. remove throttle bodies etc. takes 2-3 hours for a skilled mechanic to get the clutch out, then 4-6 hours to put all back together again CORRECTLY!

If the clutch is NOT slipping, I would suggest removal of the starter motor on the lower LHS of the engine/ trans. and measurement of the clutch disc before you start the work of disassembly

Posted on Oct 07, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Engine rattled

That is not the engine rattling. That is the gearbox bearings that need to be replaced. There is also a cushion drive in the gearbox that may need to be replaced.

Apr 08, 2013 | 2008 BMW R 1200 GS Adventure

1 Answer

My 2004 bmw 1150 gs adventure is choking after it is in gear

If your bike is stalling as you put it in gear, the side stand switch is faulty. You can take them apart, clean them and reassemble and all should work fine again.

If however may need to be replaced if it had made contact with the exhaust and possibly melted.

Mar 18, 2012 | 2004 BMW R 1150 GS Adventure

1 Answer

I would like to fit a BMW 1200 GS Adventure tank

chegk out "" tell's you everything

Apr 22, 2010 | 2004 BMW R 1200 GS

1 Answer

My r1150gs bmw is making a knocking noiseknocking noise

well, something is going on in the clutch hub, maybe the clutch rod bearing.

Sep 08, 2009 | 2004 BMW R 1150 GS Adventure

1 Answer

Clutch problem

check the level of the clutch fluid in your resevoir, maybe a slow leak that is allowing the chutch to release. When was the last time the fluid was changed?

Jun 16, 2009 | 2006 BMW R 1200 GS Adventure

2 Answers

False neutrels between 4th and 5th and 5th and 6th gears

shifting forks are all out maybe, but make sure your clutch is working good and fully dissengaging , if clutch is good, you need tranny repairs

Jun 14, 2009 | 2005 BMW R 1150 GS Adventure

1 Answer

Clutch issue

If the plates look burned... you need to replace them. Have you been slipping your clutch overmuch? Or clutching up into wheelies? You'll also need to check to see if the metal discs have either warped or blued. [i]Best done by a shop.[/b]

Nov 20, 2008 | 2004 BMW R 1150 GS Adventure

Not finding what you are looking for?
2007 BMW R 1200 GS Adventure Logo

1,287 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4821 Answers

Mike Gilbreath

Level 1 Expert

50 Answers


Level 3 Expert

78936 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides