Question about kawasaki KLX 300 Motorcycles

2 Answers

I have a kawasaki lakota 300 (2001) It starts and runs with the choke on soon as i turn choke off it dies idle adjustment screww does nothing. I can here that it is working. Ive ran it up and down the street hitting all gears....wide open. it will not idle. without choke on.What else can i try ? You do not list my model. I have atv 2 wheel drive....lakota 300. I had to choose a random model under your listing.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

You need to take off your carburetor , disassemble it, and clean the jets (specifically the slow jet) and the passageways in the carburetor body that feed the gas to the carburetor throat. Carefully set your air screw setting back to stock setting. and reassemble. Inspect the intake manifold and air box tubes for cracks and separations. That should get you idling again.

Posted on Oct 06, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

Im having same problem. Soon as i take choke off it dies. I can run it mad for about 5-8 minutes then it wont start again for 4-6 hours. It turns over but just wont start.

Posted on Dec 10, 2012

  • bit_ya
    bit_ya Dec 10, 2012

    Im having same problem. Soon as i take choke off it dies. I can run it mad for about 5-8 minutes then it wont start again for 4-6 hours. It turns over but just wont start.

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 Kawasaki Concours will not run with choke off


Hi, Cecil and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need please Click on the blue links below. Good luck and have a wonderful day.
Concours Owners GroupTM Sport touring at its finest SM
having problems with Concours
Kawasaki 1400GTR Service Manual
OEM Parts for Kawasaki
Download Manual 2004 Kawasaki Concours Owner Manual

Jun 15, 2017 | 2008 kawasaki 1400 GTR

1 Answer

Kawasaki lakota 300 starts and runs great for about 10 to 20 mins then starts sputtering and dies after it sits for about 30 or more mins it starts again. pulled plug no spark after it dies.


problem ignition control module or coil/s
electronic component failing when getting hot
replace coil /s and or ignition control module

May 27, 2016 | kawasaki Motorcycles

1 Answer

1994 Kawasaki ZXR 400 idles high when hot


Hi, Anonymous and the usual suspects are:
1. Throttle cables improperly adjusted, pinched or need lubrication.
2. Idle adjusting screw needs to be backed off.
4. Air fuel mixture adjusted too lean start with 2 full turns.
5. Intake system air leak.
6. Fast idle choke ramp is not releasing.
7. Broken throttle return spring.
8. Damaged diaphragm or slide.
9. Faulty MAP, TPS, ATS, O2, sensors or wiring/connector.
10. Multiple carburetors not in sync.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
High high high idle revs HELP
www zxrworld co uk
Kawasaki ZXR400 Service Manual Supplement
OEM Parts for Kawasaki
Kawasaki Ninja Owners Manuals

Sep 19, 2017 | 1994 kawasaki ZXR 400

1 Answer

Fuel pump problem 1995 kawasaki ZX7


YUP SO NOT OIL/GAS PROBLEM HERE EITHER CARB NO GOOD OR PISTON RINGS WORN PLUS WHILE AT IT REPLACE SPARK PLUG YOU CAN TRY TO ADJUST CARB IDLE SPEED JET ETC FIRST IF YOU CHOOSE.

Jul 02, 2013 | Motorcycles

1 Answer

I have a 1995 kawi 750 and at idle she runs great but as soon as u go to ride and get to 5000 to 6000 rpm it will just die but if u push in this black little button under the clutch or play with it a bit...


triple check choke? Is it staying on once warm? Mine was cable and siezed and choke on to start from cold, when it warmed up it turned out choke was stuck half on. Like if you ride then whack choke on it stalls?
ZX7r

Mar 15, 2012 | 1995 kawasaki ZXR 750

1 Answer

2004 Kawasaki ZZR250 will not idle without the choke on


Hi, Teresa26mill and the usual suspects are:
1. Fuel cap or fuel tank is not venting properly.
2. Fuel filter clogged.
3. Fuel line pinched or kinked.
4. Vacuum line from the petcock to intake manifold cracked.
5. Float needle and seat sticking.
6. Float level too low.
7. Carburetor bowl vent line clogged/blocked/pinched.
8. Idle adjusting screw set too low.
9. Air/fuel mixture screw set too lean.
10. Idle port, transfer ports, slow air jet clogged.
11. Slow fuel jet clogged.
12. Faulty fuel pump.
For more information about your issue and valuable "Free" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Bike won run without choke Kawasaki Forums
06 Ninja 250 won stay running unless choke is open
Kawasaki ZZ R250 Service Manual
OEM Parts for Kawasaki
2004 Kawasaki NINJA 250R Owner Manual

Nov 24, 2017 | 2004 kawasaki ZZR 250

1 Answer

Kawasaki Ninja 250 running problem


This could be due to timing screw being incorrectly set
Locate gold timing screw on the carbrettta turn it clockwise only slightly till bike idles without choke on, Then when choke it on it should idle a touch higher.

Jun 21, 2010 | 2008 kawasaki Ninja 250R

4 Answers

05 750 brute force missing badly


Just had same problem. Take carbs off and clean all jets and bowl. Be carful front and rear carb have different sized jets. When you put quad back together put entire airbox together even the cover. This quad will backfire unless air box is complete. I bet you anything your carb is full of trash.

Jan 22, 2009 | kawasaki Full Suspension Mountain Bike Men

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

1,038 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

77202 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...