Question about 1999 Honda VT 750 CD Shadow A.C.E. Deluxe

2 Answers

2003 water leak between the cylinders on the crossover pipe

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Where is the FUSE BOX located on a HONDA SHADOW ACE 2002

Posted on Apr 19, 2011

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

Replace the crossover pipe. It is about $25.

Posted on Oct 06, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reliance 501hot water runs for just a minutes then runs out


http://waterheatertimer.org/How-to-fix-water-heater.html
Identify type of water heater

http://waterheatertimer.org/Crossover.html
Check for crossover

http://waterheatertimer.org/Leaking-water-heater.html
Broken pipe leaking all the hot out of tank? Turn off all water and put ear against pipe.

Gene

Jun 25, 2014 | Reliance Water Heaters

1 Answer

Gas ignites flame but water is not getting hot


You have gas water heater with working burner.
But not getting hot water at faucet?

1) Bad faucet cartridge. Test for crossover. Copy following link:
http://waterheatertimer.org/Crossover.html


2) Is there hot water inside the tank? Open drain valve and check for hot water.

3) Drips and leaks: Turn off all taps and put ear against pipe and listen for water leak.
Water leak can run all the hot out of tank.

Dec 05, 2012 | Water Heaters

2 Answers

Torque specification on a 2003 alero cylinder heads 3.4 liter


3.4L Engine To Remove:
  1. Remove the lower intake manifold.
  2. Remove the exhaust crossover pipe.
  3. If removing the right cylinder head, remove the catalytic converter from exhaust manifold.
  4. If removing the left cylinder head, remove the engine oil dipstick and tube.
  5. Remove the rocker arms and pushrods.
  6. Remove and discard the cylinder head bolts.
  7. Remove the cylinder head.
  8. Clean the mating surfaces on the following items:
    • Cylinder head
    • Cylinder block
    • Intake manifold
  9. Clean the cylinder block bolt threads.
NOTE: During disassembly, keep the valve train components together for proper location during assembly.
To Install:
NOTE: Coat the cylinder head bolt threads using thread sealer.
  1. If removed, install the following components:
    • Exhaust manifold
    • Accessory studs
    • Spark plugs
  2. Place the cylinder head gasket in position over the dowel pins. Ensure that the THIS SIDE UP note is showing.
  3. Install the cylinder head. Cylinder head torque sequence ’99-‘00 gmpc_v6_14.gif

    Cylinder head torque sequence ’01-05 gm-03-34-682.gif

  4. Install the new cylinder head bolts.
    • Tighten the cylinder head bolts a first pass to 44 ft lb (60 Nm).
  5. Tighten the cylinder head bolts in sequence an additional 95 degrees.
  6. Install the intake gasket.
  7. Install the pushrods and rocker arms.
  8. Raise and support the vehicle.
  9. Install the catalytic converter and dipstick tube and indicator if removed.
  10. Lower the vehicle.
  11. Install the exhaust crossover pipe.
  12. Install the intake manifolds.
  13. Connect negative battery cable.
  14. Fill the cooling system.

Jul 03, 2010 | 2003 Oldsmobile Alero

2 Answers

Looking for thermostat locatiion on 3400 motor


remove air cleaner intake duct, partially drain cooling system, remove radiator inlet hose from water outlet hosuing which is down on side of engine in between cylinder heads and above trans, remove exhaust crossover pipe,remove water outlet housing bolts, remove water outlet housing and gasket, remove thermostat clkeaning mating surfaces and reverse install procedure.

Jun 17, 2010 | 2003 Chevrolet Impala

3 Answers

Bmw 745i 2003 water leaks out from front of motor and it's not the water pump or any hoses , I changed water pump and gaskets. the water flows out as soon as I fill tank,it's behind the crank pully


I had this same problem in my 02 745i... It's leaking from the internal coolant pipe... a $.05 rubber ring is going to cost you 3-5k easily.

Jan 26, 2010 | 2004 BMW 7 Series

1 Answer

How do i change my thermostat on my 2001 pontiac aztek. also how do i remove the crossover exhaust pipe to get to the @#$%^ing thing?


Exhaust Crossover Pipe Replacement
Removal Procedure
  1. Disconnect the battery ground (negative) cable.
  2. Remove the throttle body air inlet duct.
  3. Drain the coolant from the cooling system.
  4. Remove the inlet radiator hose from the engine.
  5. Remove the thermostat bypass pipe.
  6. Remove the exhaust crossover heat shield bolts.
  7. Remove the exhaust crossover heat shield.
89160026

  1. Remove the exhaust crossover pipe studs/nuts.
  2. Remove the exhaust crossover pipe.
  1. Remove the air cleaner and duct assembly.
  2. Drain the coolant until the coolant level is below the thermostat.
  3. Remove the crossover exhaust pipe.
  4. Remove the radiator hose from the thermostat housing.
  5. Remove the thermostat housing bolts and clean any sealer from the bolt threads.
  6. Remove the thermostat housing and gasket.
Removal Procedure

89153578

Dec 11, 2009 | 2003 Pontiac Aztek

2 Answers

Honda shadow ace 1999 leaking coolant from pipe between the two cylinder chambers. I was told it could be water gasket on both sided. any other quick fix not so mush $$$$


It is a farily common issue with that engine. If by "water gasket on both sides" you are referring to the O-rings at each end of the crossover pipe where it enters the cylinder heads, that would be the most likely cause. The O-rings are inexpensive but usually have to be ordered from Honda. The service manual say's to pull the heads to repair but an easier and quicker fix has been found.
If you search the appropriate tech forum on the shadowacetourer forum you will find detailed instructions on the techniques.

Sep 21, 2009 | 1999 Honda VT 750 CD Shadow A.C.E. Deluxe

1 Answer

Antifreez leaking at rear of engine (3 liter) above the bellhousi


coolant pipe is known to rot out replace tube and orings

Mar 11, 2009 | 1992 Dodge Caravan

Not finding what you are looking for?
1999 Honda VT 750 CD Shadow A.C.E. Deluxe Logo

465 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4525 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...