Question about 2004 Suzuki RM 125

Open Question

Ive got a rm125 that has a false neutral between 2 and 3 whaen under strain , also find 1st hard to find when idle

Posted by on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

81 rm125 hard to kick over and slips into gear

Hi Christian it looks like something broke away under the clutch cover. Like a spring or a guide rail. These could affect both the gears and the kick start shaft. You will need to remove the clutch cover to examine further. Regards Jim...

May 16, 2015 | Motorcycles

1 Answer

Hey I recently just replaced my gear lever for my 2005 hyosung gt250r and upon replacing I had troubles with shifting into neutral while the engine was running from 1st gear. I've tried shifting from

That is a common thing with the 250r, Just blip the throttle a little to get it to shift, or you could adjust your idle a little lower to help. don't set it lower than 950rpm tho.

Dec 10, 2011 | 2005 Hyosung GT 250

1 Answer

I have hughesnet and a belkin f5d8235-4 v2000 (N+) router and i run a connection test on my ps3 i get 1st 2 success and psn failed because of time out...Also when i play multiplayer games like assassins...

That is the reason you are having problems. NAT refers to how much bandwidth you have. Try making sure that you play whaen no computers are connected. My PS3 is like this as well, and I don't want to upgrade my internet so I just deal with it

Thank you for your time, good luck and I hope this helps

Jun 08, 2011 | Video Game Consoles & Games

1 Answer

Engine won't stay running when going up hill. Engine wants to stall when under strain. Idles fine in neutral.

sounds like a cat convertor plugged up, maybe timing is off, needs tune up real bad??? Has it had new plug wires in the last 50k miles?

Dec 10, 2010 | 1988 Mitsubishi Pickup

1 Answer

It starts and runs fine maybe idles a little rough when you go to restart when hot or cold it stumbles and has a hard time getting a stable idle .

Sound to me like a bad EGR valve. Do you see black smoke if you try to give it gas whaen its stumbling?

Mar 08, 2010 | 1997 Chevrolet Tahoe

2 Answers

Not accelerating when under strain

change your egr(exhast gas re-circle) valve if its a deisel. and aic(air idle control) valve both types located on the in-let manifold.

Feb 26, 2010 | 2004 Land Rover FreeLander

1 Answer

Neutral light does not come on until 2nd gear is engaged

The neutral light should only light between 1st and 2nd gears. There may be a "false neutral" at other places. Wear exacerbates (i love big words) the size of these but they don't hurt anything as long as the bike shifts well.

Jun 07, 2009 | 1978 Suzuki GT 500

1 Answer

Transmisssion shifts slow when going from 1st to 2nd gear.

Try to get some lubrication on any cables &/or linkages to transmission, it sounds like they are sticking a bit.

Jan 24, 2009 | 1999 Honda Accord

1 Answer

Hard to shift into 1st&shifter does not return to neutral.

1 Dirty Oil / Low oil
2 broken return spring on gear lever
3 Clutch worn

hope this helps

Jan 17, 2009 | 2000 Suzuki VS 1400 Intruder

2 Answers

False neutral

There is pretty much a false neutral between every gear on an Enfield. You need to ease the gear up or down and do it by feel more than a hard up or down movement

Nov 10, 2008 | 2007 Enfield Bullet Electra

Not finding what you are looking for?
2004 Suzuki RM 125 Logo

Related Topics:

48 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

76051 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers


Level 2 Expert

83 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides