Question about 2004 kawasaki KLX 400 SR

Open Question

My kawasaki kfx 80 wont start and it wont crank over. it also has not been started in about 4 years can you help me?

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

bozcro
  • 867 Answers

SOURCE: my 1991 kawasaki kx250 will not start at all

make sure you clean the fuel tank, petcock, change the oil. old fuel does not work, dump the old fuel and buy the best gas you can get

Posted on Jul 14, 2009

tabbycat282
  • 56 Answers

SOURCE: MY KFX 80 HAS 65 PSI COMPRESSION AFTER TOP END

You may have a problem with your reeds.If you have done a rebuild because something internally has destroyed itself then the chances of those loose metal fragments chipping or cracking a reed are quite high.Pull the reed block and check it out and replace if neccesary.Other than that i can only presume a problem with the rebuild.hope i've given you some direction Armstrong.....Good luck with it .

Posted on Dec 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Carburater replacement


  • Why do you need a new one?
  • Details in the main link for cleaning and replacing.
  • Carburetor replacement parts for 2006 Kawasaki KFX50 ... www.2wheelpros.com/oem-parts/2006-kawasaki-kfx50-ksf50-a6f... Original 2006 Kawasaki KFX50 (KSF50-A6F) Parts. Search Carburetor parts using manufacturer microfiche assembly diagrams.
  • 2006 Kawasaki KFX50 KSF50A CARBURETOR Parts, 2006 Kawasaki ... www.bikebandit.com/oem-parts/2006-kawasaki-kfx50-ksf50a-carburetor/... 2006 Kawasaki KFX50 KSF50A CARBURETOR Parts at BikeBandit.com. The Web's most trusted source for 2006 Kawasaki KFX50 KSF50A CARBURETOR OEM Parts.
  • 2008 Kawasaki KFX50 (KSF50-B8F) - CARBURETOR ... - ... www.2wheelpros.com/oem-parts/2008-kawasaki-kfx50-ksf50-b8f... 2008 kawasaki kfx50 (ksf50-b8f) - carburetor ... 2008 ksf50b8f (932) schnee white; air cleaner; battery; belt converter; carburetor(b8f/b9f) chassis electrical equipment;
  • Kawasaki ATV Parts 2006 KSF50A6F KFX50 CARBURETOR Diagram www.partzilla.com > Kawasaki Parts > Kawasaki ATV Parts Search for Kawasaki ATV Parts 2006 ... Parts / Kawasaki ATV Parts / 2006 / KSF50A6F KFX50 Kawasaki ATV Parts 2006 KSF50A6F KFX50 CARBURETOR Diagram ...
  • 2008 Kawasaki KFX50 (KSF50B8F) Carburetor(B8F/B9F ... www.kawasakipartshouse.com/oemparts/a/kaw/500b50d3f8700223e47963d1/... Shop our large selection of 2008 Kawasaki KFX50 (KSF50B8F) Carburetor ... Kawasaki; ATV; 2008; ... or any Replacement Parts! Kawasaki Parts House is ...
  • Kawasaki KFX50 KFX 50 Carburetor Carb 15003-S004 Fuel Gas ... www.amazon.com > ... > Parts > Fuel System > Carburetors Kawasaki KFX50 KFX 50 Carburetor Carb 15003-S004 Fuel Gas 2003-2006 New OEM
  • Kawasaki ATV Mini KSF KXF 50 Carb Carburetor Used Parts ' ... www.ebay.com/sch/sis.html?_nkw=Kawasaki+ATV+Mini+KSF+KXF+50+Carb... Find best value and selection for your Kawasaki ATV Mini KSF KXF 50 Carb Carburetor ... Kit Carb Repair KFS 50 KFX ... 2006 Kawasaki KFX KSF 80 Carburetor ...
  • 2006 kawasaki carburetor ' eBay www.ebay.com > Search > 2006 kawasaki carburetor Refine your search for 2006 kawasaki carburetor. Refine. more Format ... Kawasaki KFX 400, 2003-2006, Carb / Carburetor Repair Kit - KFX400 ... $34.50. List price: ...

  • Go to Bing homepage

    Jul 09, 2016 | kawasaki 2006 KFX 50

    1 Answer

    I have a 2004 Kawasaki KFX 700 has no spark I changed the ignition switch, coils, CDI and rectifier and still nothing.


    Hi, Adrian and the usual suspects are:
    1. Fouled spark plugs.
    2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
    3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
    4. Loose connection at ignition coil or plug between ignition sensor and module.
    5. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose.
    6. Faulty ignition coil or ignition / electronic module
    7. Faulty CKP, CMP, or BAS sensor.
    8. Faulty ignition switch.
    9. Tilt sensor needs a reset.
    10. Security alarm failing to disarm needs reset
    For more information about your issue and valuable "FREE" downloads that you will need please click on the links below Good luck and have a nice day.
    kfx 700 no spark
    KFX wont start no spark Kawie Central Forums
    Nyroc ATV info website
    http://vitek.vellum.cz/manualy/Kawasaki%20KFX700%20V-Force%202003%20Service%20Manual.pdf

    May 07, 2016 | kawasaki Motorcycles

    1 Answer

    Hi I have a 04 kfx 400 was runing fine started with no problems then a couple days ago whent out to go for a ride and now won't start has spark and fuel to carb


    Hi, Anonymous and the usual suspects are:
    1. Fuel tank empty.
    2. Fuel supply valve/petcock turned off.
    3. Fouled spark plugs.
    4. Engine flooded as a result of overuse of the enricher.
    5. Vacuum hose to the fuel supply valve/petcock disconnected, broken, cracked, or pinched.
    6. Fuel valve/petcock or filter clogged.
    7. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
    8. Loose or corroded wire connection at the coil, battery or plug between ignition sensor and module.
    9. Spark plug cables in bad condition and shorting, cable connections loose, or connected to the wrong cylinders.
    10. Ignition timing incorrect due to a faulty ignition coil, ignition module or sensors (MAP, CMP, CKP, O2 and/or BAS).
    11. Security alarm needs a reset.
    For more information about your issue and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
    kfx 400 wont start
    http://www.atvriders.com/vbb/archive/index.php/t-369244.html
    KFX 400 WONT START
    https://www.tradebit.com/filedetail.php/105497175-kawasaki-kfx-400-service-manual-repair-2003-2006

    Mar 02, 2016 | Motorcycles

    1 Answer

    My Kawasaki KFX 80 isn't getting any fire from spark plug. nothing wrong with the plug. it's new. what are the possible causes


    Hi, Anonymous and the usual suspects are:
    1. Fouled spark plugs.
    2. Discharged battery, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
    3. Loose connection at ignition coil or plug between ignition sensor and module.
    4. Spark plug cables in bad condition, shorting / leaking, spark plug cable connections loose.
    5. Faulty ignition coil or ignition / electronic module
    6. Failed CKP, CMP, or BAS sensor.
    7. Faulty ignition switch.
    8. Security alarm failing to disarm needs reset
    For more information about your issue and valuable free downloads that you will need please visit the websites below. Good luck and have a nice day.
    OEM Parts for Kawasaki
    http://www.pdf-manual.com/vehicle/atv/kawasaki/manual-kfx-80-2003-19114.html
    9751222 Suzuki Lt80 Service Manual Repair 1987 2006 Lt 80 pdf
    No Spark Diagnosis Motorcycle 4 Wheeler Starting Issues Using Multimeter

    Feb 29, 2016 | kawasaki Motorcycles

    1 Answer

    Timing on a kfx 50


    there should be a hole in your flywheel that line up with the screws and your coil loosen it up and you slide it back and forth hard to get it so far out that it wont start though if possible it would be easier for you to pull the flywheel then you can adjust it by hand starting the center and see how it does

    Jan 31, 2014 | kawasaki 2007 KFX 50

    2 Answers

    MY KFX 80 HAS 65 PSI COMPRESSION AFTER TOP END REBUILD VERY HARD STARTING


    You may have a problem with your reeds.If you have done a rebuild because something internally has destroyed itself then the chances of those loose metal fragments chipping or cracking a reed are quite high.Pull the reed block and check it out and replace if neccesary.Other than that i can only presume a problem with the rebuild.hope i've given you some direction Armstrong.....Good luck with it .

    Dec 06, 2009 | 2003 kawasaki KX 125

    2 Answers

    Battery works but wont start


    first of all check for at least 12 volts from the battery and the charger, you can test this using a multimeter

    Apr 27, 2009 | Fisher Price Power Wheels Kawasaki KFX...

    Not finding what you are looking for?
    2004 kawasaki KLX 400 SR Logo

    Related Topics:

    296 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top kawasaki Experts

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    4514 Answers

    yadayada
    yadayada

    Level 3 Expert

    74896 Answers

    Gino Cussen
    Gino Cussen

    Level 2 Expert

    216 Answers

    Are you a kawasaki Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...