Question about 2005 Harley Davidson FLHTCUI Electra Glide Ultra Classic

1 Answer

Need to replace drive belt do you need to take primary off

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

Yes, the Outer and Inner primary has to come off as well as the swingarm. The belt will not go on without removing the swingarm because of the way the frame is made.

Good Luck
Steve

Posted on Oct 04, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Drive belt installation 2000 electreaglid classic


Remove the rear wheel and then remove the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster as an assembly and then remove the primary chaincase housing. Support the bike under the rear fork and engine and then remove the pivot shaft and the spacer THEN slip the belt off the transmission sprocket and then install a new drive belt over the transmission sprocket and proceed to reinstall the pivot shaft and spacer after which you can remove the support holding the engine and rear fork and install the primary chaincase housing, the primary chain assembly and the primary chaincase cover and fill the primary chaincase with lubricant up to the bottom of the clutch diaphragm spring. Install the rear wheel and adjust the belt to the proper deflection dimension and confirm that the rear wheel is properly aligned side to side.

Jul 08, 2014 | 2005 Harley Davidson FLHTCUI Electra Glide...

1 Answer

How to replace drive belt on a 1993 harley davidson heritage softail classic?


To remove a Softail drive belt FIRST remove the rear wheel then remove the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster as an assembly, then remove the primary chaincase housing, place a support under the rear fork and engine, remove the pivot shaft and spacer, slip the drive belt off from the transmission sprocket.



To replace a Softail drive belt FIRST not that all belts, used or new, must never be formed into a loop smaller than 5.0 in. (130 mm), and must never be bent backwards because this can severely weaken the belt and cause premature failure if it, then install the belt over the transmission sprocket, install the pivot shaft and spacer, remove the support holding the engine and rear fork, install the primary chaincase housing, the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster and the primary chaincase cover, fill primary the primary chaincase with oil, install the rear wheel, align the rear wheel and properly adjust the belt tension to the specified deflection.

Apr 28, 2014 | 2000 Harley Davidson FLSTC Heritage...

1 Answer

How to replace drive belt on 1993 harley davidson?


Is it a softail????



To remove a Softail drive belt FIRST remove the rear wheel then remove the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster as an assembly, then remove the primary chaincase housing, place a support under the rear fork and engine, remove the pivot shaft and spacer, slip the drive belt off from the transmission sprocket.



To replace a Softail drive belt FIRST not that all belts, used or new, must never be formed into a loop smaller than 5.0 in. (130 mm), and must never be bent backwards because this can severely weaken the belt and cause premature failure if it, then install the belt over the transmission sprocket, install the pivot shaft and spacer, remove the support holding the engine and rear fork, install the primary chaincase housing, the primary chain, the clutch, the engine compensating sprocket, and the chain adjuster and the primary chaincase cover, fill primary the primary chaincase with oil, install the rear wheel, align the rear wheel and properly adjust the belt tension to the specified deflection.

Apr 28, 2014 | 2005 Harley Davidson FLSTC - FLSTCI...

1 Answer

The belt broke ,need to change 2002 roadking


Replacing the final drive belt is a major job. You'll have to drain and pull the entire primary including the inner primary cover, the entire primary drive, and starter. You'll also have to remove the rear wheel and the swing arm to replace the belt. There are some special tools that you will need especially if you have to pull the front belt pulley to check it for wear or to replace any seals that may be leaking. If you plan on doing this job yourself, I'd highly recommend the purchase of a service manual. It's not a small job.

Good Luck
Steve

May 15, 2011 | 2002 Harley Davidson FLHRCI Road King...

1 Answer

Need a drive belt diagram for a murray lawn mower model 465306x8


Please find attached a "amateur" drawing of the belt routing for the 37x89MA primary deck drive belt. Hope this helps.wefixem.jpg

Mar 03, 2011 | Murray 46 Primary Lawn Mower Blade Belt...

1 Answer

Install drive belt on harley fxst-c


Be ready to remove the following:
rear wheel (to allow removal of old belt and threading of new belt)
outer primary (to allow access to the two items following)
clutch hub (to allow removal of the inner primary)
primary drive chain (same as above)
compensator sprocket (same as above)
inner primary (to allow access to primary drive sprocket, and allow belt removal, and thread new belt)
While you have the rear wheel off, you may want to check for wear on the belt sprocket, as they can wear out.
Inner and out primary gaskets will be needed. Figure 50 dollars as I think they only come in a kit, maybe not.
If you have the tools and capability to do the above, that's about it.
The belt will run over a hundred dollars, and if done in a shop, you can see that most expense is for labor.

Jun 13, 2010 | Harley Davidson FXST - FXSTI Softail...

1 Answer

Cut in final drive belt on 2007 flhtcu how do you remove it & replace


This is a major job. This is the bad thing about a belt type final drive. You must remove the entire primay, outer primary cover, clutch and primary chain, starter, and inner primary. You must also remove the rear wheel and the swing arm to replace the belt. That's why the job is so expensive plus the belt itself ain't cheap. If I can help you further, let me know.

Good Luck
Steve

May 27, 2010 | 2000 Harley Davidson FLHTCUI Electra Glide...

1 Answer

2000 FXSTB Night Train: drive belt broke...


Not a common problem, but not unusual either. You'll need a new belt $100 plus, and a lot has to be removed form the bike to replace the broken one. Rear tire Rear fork outer primary maybe inner primary (can't remember)
Sorry

May 17, 2010 | 2000 Harley Davidson FXSTB Night Train

3 Answers

Self propulsion doesn't work on my upright. Vacuum works fine otherwise


You will need to look @ your owners manual to see where the self propell belt is located i am sure yours is broke and need to replace,- it will not be hard to replace-Lance

Oct 21, 2009 | Hoover Vacuums

1 Answer

2005 harley drive belt replace.


pretty involved job...do you have a lift? nned to remove bags, raise bike..remove rear wheel...you will also need to remove the outer primary cover, primary chain, clutch assy, and inner primary cover, and disconnect wing arm...once belt is in place over the front drive pulley, you begin re-assembly...if you have never dont it, i would reccommend buying a service manual, or finding a friend that has...its not really hard, but it isnt a job that you should tackle without some experience

Apr 17, 2009 | 2005 Harley Davidson FLHTCUI Electra Glide...

Not finding what you are looking for?
2005 Harley Davidson FLHTCUI Electra Glide Ultra Classic Logo

661 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...