Odometer stop working 86 bmw 325e - 1986 BMW 3 Series

The best and easiest way to do this is to go to an auto parts store like Autozone, Advance or NAPA. Ask them for this at the counter, they will print it for you. If not, they have Haynes manuals for sale that will have this image.

you will need the use of a lift to be able to lift car off the subframe once you have dismantled the wheels, suspension etc , get a work shop manual, that will give you a step by step guide on how to do this , it is pretty complex so i'd really recommend getting the workshop manual

Are you trying to test it for accuracy? If so, yes it's possible but you'll need special equipment to test it, plus you need to remove it from the vehicle (depending on year, it changed a lot from 1983 to 2013, add a year in the comments will be helpful).

Your simplest option is to drive some known distance and check to see if the odometer reads that you traveled the same distance, or drive beside a friend with a good speedo and see if it matches yours. Or, most GPS systems will calculate your speed too.

it could be a broken cam shaft

replace clutch master slave cylinder.

YOU NEED TO REMOVE THE STRUT COMPLETELY USING COIL CLAMPS CLAMP THE SPRING AND REMOVE TOP PLATE UNDOO THE LARGE NUT ON THE STRUT ITSELF THEN PULL OUT THE INTERNAL SHOCK REPEAT THE PROCESS IN REVERSE FOR ASSEMBLEY

Call your local BMW dealer and ask them...should be free!
Good Luck

check main relay

check to see if the raised pin on the fly wheel has has broke off. to do that you, take out the position sensor on the bell housing & look on the flywheel to see if it is there. your have to manually turn the engine whale somebody else looks to see if the pin is still there. if it is not. where it is suppose to be, just put a sheet metal screw in its place. by taking a long drill bit and drilling it out to put the screw. try and see if that's the problem