Question about 2003 Honda CBR 600 RR

1 Answer

Press starter button and hear click sound from battery box bike wont start but i can push it and it will run

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

Follow the positive battery cable to the starter solenoid. If you jump the two cable terminals on the solenoid and the starter cranks, you have a bad solenoid. If you hold the starter button and tap the starter with a plastic hammer and the starter works, you need new starter brushes. Any other problem with the starter and you will need to buy a new assembly.

Posted on Oct 02, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bike wont start


check the fuse box and recheck the battery.
Also check the starter motor terminals and make sure they are clean.

Jan 04, 2014 | BMW R 1100 R Motorcycles

1 Answer

Okay i own 1996 suzuki gsxr750 now i have recently took everything off the bike to get parts painted tank,fairings, etc. while i was doing some minor things with the bike while it was completly stripped...


Bike batteries need full charge to start a bike, if there is less than full charge you can't even push start them. No click generally means no charge, the clicking sound is the solenoid working.
When you just start the bike and run it at idle, even fast idle. The battery does not get sufficient charge. What you take out of it to start it, is more than what you put back in it when you run it at idle. Bikes need to be at road speed to charge efficiently.
Also just sitting around they discharge, you may have an earth leak also. That causes your battery to discharge at a more accelorated rate than normal. If it has a clock in it, this bleeds off a small amount of power but still enough if it isn't being correctly charged.

Aug 01, 2011 | Suzuki GSX-R 750 Motorcycles

4 Answers

My 92 600 katana wont start. It wont even turn over, when i press the start nothing happens. the battery is good i charged it up and all the lights work but it still wont turn over.


If the clutch switch, the neutral safety switch, and the side stand switch are all working correctly, then test the starting system. When you push the starter button you should hear a click , so you know the button is working.Follow the positive battery cable to the starter solenoid. Disconnect the two wires that activate the solenoid, test the two wires from the harness make sure the needle on your voltage meter jumps when you push the starter button, this means the button is good. Take a wire and jump the two posts on the solenoid or touch the two cables together. If your starter works, then you need a new solenoid. If you hold the starter button and tap on the starter with a plastic hammer and the starter works you need new starter brushes. Anything else wrong with the starter and you need to replace the starter assembly , the manufacturer does not make replacement parts for the starter.

Jul 28, 2011 | 1992 Suzuki GSX 600 F (Katana)

1 Answer

My 250 vt 1999 turn key on headlights everything works! when I press start button headlight goes out and bike dosnt start, take finger off start button head light comes back on.


Your starter button is designed to turn the headlight off when pushed in halfway so all the batteries electricity goes to the starter. The starter button is a two position switch. The starter button may be either dirty and need cleaning or is broken and needs to be replaced. If you push the button all the way in do you hear a click? If you hear a click by the battery , then the starter button is good. Follow the positive battery cable to the starter solenoid. With an old screw driver or a piece of wire touch the two terminal posts on the starter solenoid together. If your starter works now you have a bad starter solenoid. If you hold the starter button and lightly tap on the starter with a plastic hammer and the starter works, then you probably need to replace your starter brushes they are worn out.

Jan 25, 2011 | 1984 Honda VT 500 C Shadow

1 Answer

Bike wont start. just clicks. battery is ok. need help?


I assume the engine is not seized and the battery is charged and good. Push the starter button, if you hear a click from the solenoid the button is good. Now , jump the two cable posts on the starter solenoid. If the starter works you have a bad solenoid. If you push the starter button and tap on the starter with a plastic hammer and the starter works, you need new starter brushes. If anything else in the starter is keeping it from working you need a new starter , the starter parts are not available from the manufacturer.

Oct 10, 2010 | 2000 Suzuki VL 1500 Intruder LC

1 Answer

I have a 2005 fatboy and i replaced the battery. when i hit the start button the starter relay clicks and nothing happens. all my lights work and the fuel pump kicks on like normal. it just wont start


Sound like starter is stuck. Try giving it a tap with a rubber mallet, while pressing start button. If this does not work, put bike in gear and push it forward a few feet, then try again to start it. If still nothing try using jumper cables on battery, then start. If no go you have a bad starter.

Sep 27, 2010 | Harley Davidson Harley-Davidson Motorcycle...

1 Answer

Bike wont start. battery charge up ,push starter button all i hear is a clicking sound.


Hi and welcome to the site,

Initially, have the battery load tested.

Offhand, temporarily jumper the 2 big terminals of the starter relay. If the starter motor spins, then a faulty starter relay. To locate the starter relay, follow the cable from the battery's + terminal.

If even jumping the 2 terminals, the starter motor would not turn, either:
  • starter motor has issues more particularly the carbon brushes and/or the commutator segments; or
  • the battery is no longer able to hold sufficient charge.

Good luck and thank you for asking.

Jun 12, 2010 | 1982 Suzuki GSX 400 FS impulse

1 Answer

Yamaha big bear 400 will not start wilth electric started will start fine with pull start has comp,fuel and spark


Sounds like a problem with the starter, could be a starter fuse, relay or solenoid. The start cicuit wiring could also be damaged. If you can pull-start the motor, and it runs fine, you have pretty much eliminated any problems with the motor. Check the wires running from the start button make sure they are intact, also trace them and look for around a 1" cubed black box. This is the relay, when you push the button, if its working, you will feel the box click. Also locate the starter and do the same thing. If you feel or hear the starter click, the solenoid is working. The battery voltage could also be too low to energize the starter motor. Could also be a battery or alternator issue. Check the battery voltage and for any sounds coming from the bike when you push the start button.

Aug 21, 2009 | 2001 Yamaha V Star 1100 Classic

1 Answer

Bike wont start


when I tried to start it yesterday it would not start; pushing the ignition causes just one *click* sound and then nothing. The battery is reading 12.65V or so so that seems fine. I did some research and I think it's either along the lines of the spark plug(or ignition area) or maybe water in the float bowls from fueling up(?). I tried it again today and this time there was no *click* sound. I also noticed that the -neutral- and -check engine oil- lights which normally light up quickly at start up take a few seconds before lighting up. Now I think it's more in the electrical section but not exactly sure which area. I'm going to take a look at the spark plug and maybe try to drain any water out, but was wondering if anyone had any other ideas? ,When you press start, the churning sound you (typically) hear is from the starter motor forcibly turning the crankshaft. While the starter is physically turning the engine, the engine is also injecting the fuel/air mixture into the cylinders and firing the spark plugs. If the plugs successfully ignite the incoming fuel/air mixture, the engine will begin turning itself over. If you press the button and nothing happens, or you just hear a click, the starter motor is not cranking the engine. The click you heard was probably the starter solenoid attempting to engage the starter to the flywheel of the crankshaft. The problem is probably the starter. It may be a bad battery. Reading the open voltage with no load on the battery tells you nothing. Put the voltmeter across the battery terminals and read the voltage while holding the Start button.,,,

Nov 10, 2008 | 2007 ATK 450 Motard

Not finding what you are looking for?
2003 Honda CBR 600 RR Logo

558 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4535 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...