Question about 2002 Suzuki VL 1500 Intruder LC
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
could be a bad connection to the battery or the starter solinoid cant think how to spell it but its where the positive battery wire hooks up
Posted on Apr 17, 2010
Testimonial: "Thanks for the information, sounds like it could be a loose connection. Where do I find the starter solenoid ? "
Sounds like a possible stuck relay, a bad connector or low battery amperage. Try this to help troubleshoot. Put a volt meter on your battery and check voltage with key off, should be 12.2v at least, turn the key on and check,---then hit the starter switch---you should see a drop in voltage as the battery power goes to the starter---if no voltage drop then power is not going across your start switch. Of course, make sure battery is at full charge, has no dead cells, terminals are clean and tight, and especially the ground. Many times i have found the ground cable going to the frame in bad shape, (you can't see the corrision, u have to remove the cable) this will cause all kinds of problems... no start being one of them. I hope this helps, let me know what you find.
Posted on Jul 12, 2011
Tips for a great answer:
Apr 14, 2016 | 2002 Suzuki VL 1500 Intruder LC
Apr 30, 2014 | 2002 Suzuki VL 1500 Intruder LC
Oct 31, 2013 | 2001 Suzuki VL 1500 Intruder LC
Aug 28, 2012 | 2003 Yamaha Road Star Silverado
Apr 27, 2017 | 2003 Suzuki VL 800 Volusia
Apr 17, 2010 | 2000 Suzuki VL 1500 Intruder LC
Jun 23, 2009 | 2003 Suzuki VL 800 Volusia
Apr 08, 2009 | 2004 kawasaki VN 1500 Vulcan Classic
121 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: