Question about kawasaki KLX 110 Motorcycles

1 Answer

Leaks fuel from drains do i need a new carb? - KLX 110 kawasaki Motorcycles

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • kawasaki Master
  • 76,691 Answers

NO U JUST NEED NEW FUEL INLET NEEDLE VALVES

Posted on Sep 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I was riding my bike and came to a stop it shut down and started to leak gas out the air intake now it will not start. What do I need to check to fix this issue


The floater is stuck 'open'

Fuel dumping out of carbs / overflow- 1998 gas flowing freely ...

www.cbrxx.com > ... > Engine / Airbox / Exhaust / Fuel Delivery

Sep 18, 2011 - 15 posts - ‎5 authors
It will start / idle - sort of, but dumps gas out of the overflow/ carbs. I. ... If the carbs are over flowing while the motor is shut down one might ... to the bowls with outremoval of the fuel tank and maybe the air box or a ... valve/ petcock diaphragm drain line you see leaking below the bike. ..... Motorcycle Forum ...

What is wrong with my carburetor? - Instructables

www.instructables.com/.../What-is-wrong-with-my-carburet...

InstructablesApr 24, 2012 - Shut off the fuel line, drain the fuel from the carb, disassemble and verify the correct ... Then I started to notice fuel coming out of the carb intake. ... the carb (blew air thru the fuel inlet), turn the carb over (float upside down) valve ... Carb still leaking gas at the intake connection, where the choke is located.

How to diagnose carburetor vacuum leaks on your motorcycle

? 4:41
https://www.youtube.com/watch?v=XzjSEYB9RDU
Feb 2, 2011 - Uploaded by mrmaxstorey
Not only did we have vacuum leaks, but the baffles were takenout of the engine, and the previous owner had removed the airfilter and ...

Carburetor / Carb Leaking Gas? How to Fix / Repair it ...

? 5:42
https://www.youtube.com/watch?v=gbfMEYG8NvM

Dec 26, 2015 | GAS Motorcycles

1 Answer

Why won't it run?


If the carburetor is ok, check the fuel pump. If it had bad gas in it, the tiny diaphragm gaskets within the fuel pump might be gummed up a little. You can check the pump volume if you remove the fuel line from your carb, aim it into a bucket or other receptical, and watch it pump. The gas should pulse smoothly with a little force. I'm not sure how to describe it, but it should be more than just a trickle, in other works. If your pump seems to be doing ok, and all of your fuel lines are clean and clear, the problem may be an intake manifold gasket leak, a carburetor mount gasket leak, or the intake manifold itself may be leaking. The intake manifold is two-piece, pressed aluminum with a sealant in between the two pieces. A leak at any of the three locations I mentioned would cause the problems you're experiencing. The fuel would of course reach the carb, but due to the any leaks, the vacuum needed would be decreased to the point that it wouldn't be enough to draw the fuel through the carb.

Hope this helps.
TW

Apr 21, 2015 | Bobcat Miller 225 Welder Generator 907209...

1 Answer

Gas in the motor


Sounds like you have a sticking float in your carb that is letting the fuel leak through the carb and into your motor. You need to remove the carb and clean and check float and drain the oil and replace with new.

Mar 22, 2014 | 1980 Suzuki Gs 550 L

1 Answer

Fuel leak from carburettor


No need to buy a new carb. Simply clean it and or replace the float needle valve. Check float level also after replacing the float needle valve. Most of the time the carb gums up and causes this to happen when sitting for a long time without being run. If you are going to store your bike for a while. Drain all the fuel from the carbs and gas tank before storing. You can also use a gas stabilizer in not setting up more than 3 months.

Mar 20, 2014 | 2011 Bajaj Pulsar 135LS

1 Answer

I put a new carb on my riding mower.it is hard to start.when it runs fuel pours out the top.also engine wont run with air cleaner installed on it.


The carb needle is not sealing properly on its seat, as this is a new carb it may be due to dirty fuel,clamp the fuel hose, remove the float bowl and clean out, check for any dirt particules, with the bowl off partly un clamp the fuel hose, fuel should flow freely and help to clear any dirt from the needle seat, re clamp the hose and refit the float bowl, if there was dirty fuel in the bowl you need to drain the tank and re fill with fresh clean fuel, if it still leaks you may need to replace the needle, or return the new carb to where you purchased it from.

Apr 01, 2013 | Garden

1 Answer

Fuel over flows thru overflow tubes only when motor is running. motor off ignition on it stops.


Hello
Your gas tank petcock is diaphram operated.
there is a vacuum line coming off the intake, that goes straightb to the petcock.
when you turn the motor over a vacuum is created, pulling the petcock diaphram back and allowing fuel to flow to your carburetor. when you turn the motor off the vaumm is gone and the spring behind the diaphram pushes it closed and stops the fuel flow to the carbs.

Now the reason the carbs are overflowing is because the floats valves are not closing, in other words the floats are sticking.
Usually a good carb clean will cure the problem, especially for that year.
the older ones usually require new float valves/seats that are usually found in a good carb rebuild kit. You shouldn't need one.

If your really broke try tapping on the bowls of the carburetor lightly, while the engine is running, sometimes the vibration will vibrate a particle loose that may be holding open the float valve.
if it works then the fuel should stop overflowing while running.

if you know how to work on it, try this, with the engine off.
open the carburetor drain screws so that fuel will run out the carb. drain. flush out the carb.
get a container to catch the gasoline.
while fuel is flowing tap the carb bowls a few times then closed the drain screws.
clean up any spilled gasoline .
start your bike.see if they stop leaking and the floats are closing.
if it still leaks, you'll need the cleaning.

Happy Riding
Best Regards
Big Al

May 22, 2011 | 1997 Yamaha Royal Star XVZ 1300 A

1 Answer

Over flow tube is leaking gas on a new cmx250 rebel. Is the float stuck? How do I fix it?


If its the overflow, cleaning the sticky carb float could be simple fix.
Turn off fuel, drain the carb, with drain open spray carb cleaner into the bowl through the drain.(enough to rinse away varnish) then try it out, if all is good you are done. If it still runs gas out you will need to open the carb up to clean out the trash.

Apr 18, 2010 | 2002 Honda CMX 250 Rebel

1 Answer

My 2001 yamaha raptor has a fuel leak from the bottom of the carburator can you help?


There are two possible reasons for this - firstly there may be a crack in the carb. bottom. On ly solution is to drain carb, remove bottom of carb and replace with new one (that is if they are available singly), the other problem might be that the gasket is leaking that seals the bottom to the carb body. Check the screws / bolts that hold this bottom part on and see if any are broken, missing, or just loose. If the anwer is no to these questions, the gasket might still have failed. Drain the carb after switching off the fuel tap or disconnecting the fuel tank, once drained remove the carb bottom and check the rubber gasket for swollen areas, breaks or even a small nick. Replace as necessary.

Aug 23, 2009 | 2004 Yamaha XT 660 R

1 Answer

84 gsx750se starting problem!


Hi and welcome to FixYa,

PRI setting allows fuel to flow from the tank to the carbs whether engine is running or not while ON requires that there is vacuum (engine running) for the fuel cut-off valve to allow fuel to flow (safety feature).

To determine if fuel is reaching the carbs, loosen the drain screw at the bottom of the carb's bowl. Fuel should leak out of the drain hose. For safety reasons, ensure no open flame and the fuel is collected in a suitable container. Another that could be tried is to turn off fuel from tank, temporarily remove the drain hoses from each of the carbs and spray the inside of the bowl through the drain hose nipple using carb cleaner. It would be easier to use the narrow tubelike nozzle that comes with the carb cleaner.

Good luck and thank you for using FixYa.

May 30, 2009 | 1990 Suzuki GSX-R 750 L

1 Answer

Gas leak


so you have a hole in your tank somewhere. or leaky fuel **** gasket. firstly you need to find the leak. or is your gas just flowing right thru your carbs and out the overflow? shut off fuel to eliminate carbs. if it stops leaking then its probably gummed up carb floats. use Berrymans B12 fuel additive this will work into the carb and hopefully break down the gum. or strip and clean them by hand with a good spray carb cleaner. or remove air cleaner and spray directly into carb and let sit for a few days.
if it's a gas tank leak then you will have to get it lined, (liquid sealer) so long as the hole is not too big. if it is then drain and dry the tank, get it welded professionally or patch it with a filler or fiberglass and then get it sealed, i used my local radiator repair shop to het mine done.

Mar 31, 2009 | 1983 Yamaha XJ 650

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

50 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

yadayada
yadayada

Level 3 Expert

76682 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...