Question about 2003 Harley Davidson FLHR Road king

1 Answer

What does it take to change oil pan gasket on 2003 road king

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Harley Davidson Master
  • 3,506 Answers

Drain trans and engine oils and remove pan bolts and you should be able to remove or lower enough to change gasket.

Posted on Nov 16, 2014

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Oil change directions, 2003 Road King

The drain plug is on the left side of the oil reservoir pointing towards the front of the bike. The motor should be warm when you dump the oil and the o-ring should be replaced as an extra precaution (don't want to waste that new oil if you have a drip). When replacing the oil filter use a piece of tin foil to divert the oil to your waste pan.

Posted on Jul 23, 2009

  • 61 Answers

SOURCE: Do I have to change all the gaskets every time I

at my shop we do not feel it is nessasary to replace everytime. we replace them if they show any damage or every 3rd change to be safe.

Posted on Sep 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change oil on a 2005 police harley road king?


Bring engine to operating temperature and then remove the 5/8 inch hex drain plug at the lfet front side of the oil pan. Change the filter also if the oil needs to be changed.

Sep 05, 2014 | 2005 Harley Davidson FLHRSI Road King...

2 Answers

How do you repair leaking transmission oil on 2003 road king?


Take out the screws, drain the oil, remove the gasket and use brake cleaner to clean the thread holes and screws. Then put sealer like permatex on the gasket and the screws and put in back together.

Jul 26, 2014 | 2003 Harley Davidson FLHR Road king

1 Answer

CAN'T FIND THE OIL DRAIN PLUG ON MY (NEW TO ME) 2003 ROAD KING.


On the Road King, the oil pan is on the bottom of the transmission. Usually the engine oil drain plug is the one closest to the left front of the pan. The transmission oil drain is also under there so make sure the right oil is coming out. If it looks too clean, you're probably draining the transmission.

Good Luck
Steve

May 27, 2011 | 2003 Harley Davidson FLHR Road king

1 Answer

Picture of oil plug,harley 2001 88cc road king


I can't send you a picture but according to the drawing, the oil drain plug is in the bottom of the transmission oil pan. It should be the standard hex head type drain plug. Actually the drawing shows two drain plugs, one on the bottom and one on the front fo the oil pan. The countersunk hex pipe plug in the front of the pan looks like it's for draining the transmission. Notice the shape of the gasket. The engine oil is in the pan and the transmission oil drains down through the pan.

http://www.bikebandit.com/2002-harley-davidson-touring-road-king-flhri/o/m18665#sch626041

Good Luck
Steve

Apr 07, 2011 | Harley Davidson FLHR-FLHRI Road king...

1 Answer

How to change transmission pan gasket


Drain the engine oil and transmission oil. Remove the bolts and drop the pan. Install a new gasket and reinstall the pan. No problem. I usually allow the transmission to sit overnight if I can and let most of the oil drip out.

Good luck
Steve

Oct 03, 2010 | 2003 Harley Davidson FLHR Road king

1 Answer

Oil pan gasket what does it take to change


It would be nice to be able to get to the bolts on the oil pan without laying on the floor but otherwise, it's not that difficult. I'd just take the oil pan off and then let everything drip for a couple of days before attempting to reinstall the new gasket. Aggrevating working with all that oil dripping everywhere.

Good Luck
Steve

Sep 28, 2010 | 2003 Harley Davidson FLHR Road king

1 Answer

How do i change the oil pan gasket on a 2002 Road King? I have oil leaking from the pan.


Remove the pan, clean both gasket surfaces, wipe a light film of silicone on both surfaces, then stick the new gasket back to the surface and mount the oil pan back on.

Your local dealer can give you the torque specs, but just making them 1/2 turn past finger tight works, too. Don't ride for a couple hours after you're done, so the silicone has time to set up.

Aug 24, 2010 | 2002 Harley Davidson FLHR - FLHRCI Road...

1 Answer

Leaking oil from primary cover, I road my bike to work is it safe to ride it home . I checked the engine oil it's still full . and how hard is it to change this cover?


All old harleys leaked oil, so its no big deal. First try tightening all bolts to primary cover, they should be allen head, so you will need a allen wrench of correct size. To change gasket you will first need to remove floorboard to primary bolts, then all the allen bolts. Put a pan under to catch oil. scrape old gasket off and install new gasket with a small bit of rtv to hold it in place. Put everything back together.

Aug 21, 2010 | 2000 Harley Davidson FLHR-FLHRI Road king

2 Answers

Oil change directions, 2003 Road King


The drain plug is on the left side of the oil reservoir pointing towards the front of the bike. The motor should be warm when you dump the oil and the o-ring should be replaced as an extra precaution (don't want to waste that new oil if you have a drip). When replacing the oil filter use a piece of tin foil to divert the oil to your waste pan.

Jul 22, 2009 | 2003 Harley Davidson FLHR Road king

4 Answers

Location of oil drain plug on a 1999 HD Road King Classic


The solutions are close, so I must assume they are HD Road King answers, just not a 1999 Road King. The drain plug is on the front (facing the forks) left side (clutch) of the oil pan. On the 1999 model the drain plug is a 3/4 inch bolt. After changing the oil, be sure to replace the O-ring. The O-ring is rubber and does not last more than a single oil change. HD charges a dollar for the O-ring, but better to replace it than to end up with your new oil all over the garage floor.

Nov 11, 2008 | 2006 Harley Davidson FLHR Road king

Not finding what you are looking for?
2003 Harley Davidson FLHR Road king Logo

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4536 Answers

Mike

Level 3 Expert

4340 Answers

yadayada
yadayada

Level 3 Expert

76846 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...