Question about 2003 kawasaki KX 125

1 Answer

Spark plug keeps blowing on my kx 100 - 2003 kawasaki KX 125

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 127 Answers

If your fouling plugs then either your fuel/mix ratio is off ( should be mixing 32:1 ) (or) your bike is running to rich( getting to much fuel to engine) which means you need to rejet the carb....example:( if you have a #50 jet,you need a #48 or 49) to install a new jet, #1.)remove carb,#2.)remove the bowl(4-screws),you will see the jet and #3.)unscrew jet and replace with smaller # ( number is stamped on the jet.) you can get jets from local motorcycle dealer( but they will probably have to order them). or go online to bikebandit.com enter your bikes year,make,model,ect.and just order from them........

Posted on Sep 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My kawasaki f580v lawn tractor keeps blowing fuse to regulator ?


look for short in wiring anywhere near motor or exhaust

Jul 09, 2014 | Garden

1 Answer

KX60 stator coil values, keeps popping spark plug


burn out silencer packing or exaust leaks can burn a sparkplug , i guess your exaust system have lots of leaks that make the sparkplug fool and burn

Dec 18, 2013 | 2003 kawasaki KX 250

1 Answer

How to find out compression problem on a 2003 kx 250


Just cause the piston looks fine dosent mean the rings are still good did you do a compression test if you don't have one buy one they are great to have with 2 stroke bikes put the cylinder head back on and cover spark plug hole with finger it should first **** a bit then should blow finger off the hole the compression should be greater than 120 psi of a 125 not sure on the 250 rule of thumb if you have less than 120 your piston or rings is pooched..

Dec 27, 2011 | 2003 kawasaki KX 250

1 Answer

Hi how do you check carburttor float in kx100


I av a kx 100 2002 i think starts straght away just splutters alot wen takeing off an not hittin power band can eny 1 hellp me asap aint tryed out yet guna trya spark plug today eny uther things ya culd think it culd be please get bk asap thanks matthew :-)

Jun 17, 2011 | 2005 kawasaki KX 100

1 Answer

2005 Kawasaki KX 125 spark plug keeps fouling


Hi, Molokaiboy96 and the usual suspects are:
1. The first thing to do if your spark plug has been fouled is to check the air filter. If it's really dirty, that makes it difficult for air to get through to the engine, causing a rich condition. Either clean it thoroughly with some Air Filter Cleaner or buy a new filter. Before you put it back in the air-box, treat with some air filter oil or spray. "WARNING" adding too much oil can also clog up the filter, resulting in another fouled plug.
2. While the gas/oil ratio doesn't equate to what the jetting is, you can still foul plugs, or worse, if the mixture is wrong. Depending on your bike, it's best to look at your owner's manual for the correct ratio. For most 2-stroke motocross bikes, a ratio is 32:1 or 40:1, the gas being 32 or 40, and oil being 1. For those that don't it, it means that for every 128 ounces (one gallon) of gas, you add 4 ounces of 2-stroke oil for a 32:1 ration, or just over 3 ounces for a 40:1 ratio.
If you have too much oil in the mixture (such as 12:1), then you will probably end up fouling the plug because it is more difficult to burn that much oil. Don't try to cut corners with the oil though, because it's very important for your dirt bike's engine. 2-stokes need the oil for lubrication on the cylinder walls, so if you don't have enough (or any for that matter) then the cylinder walls will run dry, causing it to overheat and seize the engine very quickly. So it's very important that you put in the right mixture pre-mix to your 2-stroke gas tank.
Also, 2-strokes have reeds that air and fuel go through into the cylinder, so if they are cracked or broken the bike will not run right. This could cause the plug to foul, so before you go out and buy anything expensive, make sure the reeds are still good.
3. While this usually isn't the main problem, it could be that your spark plug isn't burning hot enough. Having a hotter spark will ignite the fuel stronger, leaving less residual gas/oil in the cylinder that could cause the plug to foul. This "ISN'T" the best choice, but I'd say it's safe to go one plug hotter than stock. Keep an eye on the plug color you're looking for a light tan color anything whiter and you could burn a hole in your piston. Spark plug manufacturers aren't always the same, so make sure you find out how they rate them.
4. Almost every motocross bike comes rich from the factory (especially Honda 2-Strokes when they were being made). It's usually a pretty simple fix, but many riders are too lazy and would rather continue buying plugs instead of spending a few bucks on jets.
5. Piston rings badly worn or broken.
6. Faulty ignition coil low output.
For more information about your question and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2003 kx125 fouling plugs
Spark Plugs Keep Fouling
https://www.howtomotorcyclerepair.com/images/Kawasaki-KX-125-KX250-Service-Manual-2003-2004-2005-2006-2007-2008.pdf
OEM Parts for Kawasaki
2005 Kawasaki KX125 Owner Manual

Jul 28, 2010 | 2005 kawasaki KX 125

1 Answer

Spark plug keeps oil fouling. What band of oil shoul use? Is 40:1 gas mix good? also wat spark plug? BR9ES, BR8EG, or R7376-9?


32 to 1 is the standard mix. That is 4 ounces two stroke ENGINE oil per gallon. The brand doesn't really matter. Don't use MOTOR oil in the gas. The stock plug is NGK brand, R6918B-9. I would suggest a hotter plug, R7376-8. The last digit is the heat range. The lower the number, the hotter the plug.

Feb 11, 2010 | 2004 kawasaki KX 125

1 Answer

Recommended spark plug for kx 250f


Stock :CR8E (NGK)
Optional: CR9E (NGK)

Jun 08, 2009 | 2003 kawasaki KX 250

1 Answer

91 kx 250 blows smoke and drips alot of unburnt oil out the pipe


Does it have a stock pipe,carb,any modifications! If its stock,I would put a new ring and piston in it,it seems like your getting a lot of blowby,also make sure your air filter is clean. It would help if you used an iridium spark plug.

Jan 21, 2009 | kawasaki KX 250 Motorcycles

Not finding what you are looking for?
2003 kawasaki KX 125 Logo

Related Topics:

480 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4825 Answers

yadayada
yadayada

Level 3 Expert

79186 Answers

bazzz7071
bazzz7071

Level 2 Expert

342 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...