Question about 1979 Harley Davidson XLH 1000 Sportster

1 Answer

HI THERE....HOW DO I REMOVE THE REAR MOTOR MOUNT FROM THE ENGINE?? THANKYOU SWEETIE, I'M THE CHICK WHO IS DOING ALL THE RESEARCH FOR MY HONEY. THANX SO MUCH FOR YOUR HELP!!

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

Well, Hello Chickie. I'm the guy giving what I hope is good information to you for your honey. I've got some bad news on this one. To remove the rear engine mount, you have to split the engine cases. You don't know how many times I've seen guys put the engine cases together and leave the rear mount off thinking they could put it on after getting the cases together.

However. Once you take all the cams and the transmission out of the cases, there isn't that much to splitting the cases. One thing to remember however. Look the bolts along the very bottom of the cases. Notice which direction they are put into the case, ie. what side the nut is on. If they are installed backwards, you'll wrestle with the engine for a couple of hours trying to get it back in the frame and it will not go back in because of the bolts hitting the frame. Yes, it is that tight.

Good Luck
Steve

Posted on Sep 16, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a rear motor mount on 1997 Chrysler Cirrus?


Put a jack under the back of the frame and remove the rear frame bolts. Lower the jack enough to remove the mount. Don't go down to much as the steering linkage could come apart. This would be another problem you don't need.

Mar 30, 2016 | 1997 Chrysler Cirrus

1 Answer

How to replace rear engine motor mount


1994-1997 Honda Accord Rear Motor Mount - YouTube

? 13:31
https://www.youtube.com/watch?v=QTDLBZonjvo
Aug 14, 2014 - Uploaded by NutzAboutBolts
1996 Honda Accord rear engine mount Tools: Impact wrench 3/8 ratchet ... Wat size are those bolts in the rear motor mount, I have to replace them ..... 1998-2002 Honda Accord 3.0 V6 Spark Plug Replacement - Duration: ...

How to Replace the Motor Mount on a Honda Accord ...

? 5:28
https://www.youtube.com/watch?v=jCIBNq0jg0U
Oct 17, 2013 - Uploaded by Chandler Cox
How to Replace the Motor Mount on a Honda Accord .... I have 2001 Accord and engine/front vibrates when car is idle. .... onreplacing and removing rear mounts for this year and model car.... 1998-2002 Honda Accord 3.0 V6 Spark Plug Replacement - Duration: 12:48. by CharlietoKind 103,467 views.

How To Change A Motor Mount and Transmission Mount ...

? 29:43
https://www.youtube.com/watch?v=vkO19Ux9q9M
May 30, 2013 - Uploaded by klowny1969
Step by step honda transmission motor mount and transmission... 2000 2001 2002 2003 2004 2005 engine mount how to replace install check change ... MAKE A VIDEO TO INSTALL THEREAR MOUNT MOTOR PLEASE .


Dec 16, 2015 | 2002 Honda Accord

1 Answer

Replace engine mounts are they the same mounts on 2010 front an rear


Hi Anonymous, there is only two motor mounts on rubber mounted engines, one in the bottom front of engine and one at the top. 99% of time is it's the front motor mount that goes bad. The front motor mount is not the same as the top. The rear shocks act as a rear motor mount. Please visit website below:
Harley Touring FXR The Glide Pro Front Motor Mount user objective review
Good luck

Mar 24, 2014 | Harley Davidson Motorcycles

1 Answer

How do i disconeect the motor mounts i need to disconnect motor mounts so i can raise the motor and remove th oil pan


The motor mounts have a hinge bolt that goes through the upper engine hard bracket and the engine mount rubber section, it goes from from to rear in line with the engine, remove the nuts and take the load off the mount with a floor jack under the pan (use a block softwood to avoid denting the pan), once the nut and load is off slide the long bolt out and raise the engine.

Jul 02, 2012 | 1999 Ford Ranger SuperCab

1 Answer

REMOVE REAR MOTOR MOUNT ON 1995 MAZDA PROTEGE


to remove that support is recommended to use keys of extensions to be used by the top and back of the engine,,,recommended to release the air filter and battery sleeve for space

Apr 11, 2012 | Mazda Cars & Trucks

1 Answer

Do I remove the entire cover or the little door thats atached to this cover on the passenger side? There are 3 brake lights that were recommended to replace. Driver side and passenger side plus the third...


Lamp, Rear Hi-Mount Lamp Assembly
Removal
  1. Disconnect the battery ground cable (14301) .
  1. Raise the liftgate.
  1. Remove the liftgate door trim panel (46404) . Refer to Section 01-05 for the removal procedure.
Trim Panel, Liftgate Door Removal
  1. Disconnect thebattery ground cable (14301) .
  1. On vehicles with a rear window wiper, remove the three rear wiper motor cover screws and remove the rear wiper motor cover.
  1. Pry the liftgate door trim panel (46404) away from the liftgate.
  1. Disconnect the luggage compartment lamp electrical connector.

    n11098a.gif

  1. Remove the liftgate door trim panel
  1. Rotate the rear hi-mount lamp socket counterclockwise and remove it from the rear hi-mount lamp (13A613) .

    k20521a.gif

  1. Remove the two rear hi-mount lamp housing nuts and remove the rear hi-mount lamp lens and housing.

    k20523a.gif

Oct 18, 2010 | 1995 Ford Aspire

1 Answer

My machine hotpoint WMA54 takes the water but the drum does not turn, what could be the problem? thanks


Could be motor brushes in need of replacement.
To check them, remove lower rear cover of washer.
Unplug motor and remove earth wire, remove drive belt.
Undo 2 screws securing motor to drum, and lever motor off
the mounts
Replace brushes if less than 3 or 4 mm long.
If brushes o/k, then could be control board problem.
Check all connections between module and motor.
Please rate my solutioin.
Thankyou..

Feb 01, 2010 | Hotpoint WMA54 Front Load Washer

1 Answer

Speed reduction of Hobart A200 mixer


Hi Don. If your mixer is hurling honey, you must be very popular in the ant world...Sorry!

The Hobart electric motor on your mixer was designed and engineered to operate on 115-120 volt current and is the most dependable, and capable commercial mixer out there Is it possible for you to use a commercial Imerssion Blender for the first part of your mixing operation. Once your honey thickens a bit perhaps the a200 wouldn't hurl honey. Another consideration would be to either try a different beater or modify the one you have by removing surface area from the beater. If you remove metal, be sure to do it in a balanced fashion to avoid unwanted vibration in the beater. If you're not up to removing metal, take it to a machine shop and they'll do it for you. It probably won't take long, or cost much, and they have the expertise and the equipment to do it properly. If you found this solution helpful, please rate it. Good luck! ricardok45.

Feb 02, 2009 | Hobart A200 Stand Mixer

3 Answers

Motor mount


The engine mounts are located about the middle of the block on the side of the engine. The only other mount is located under transmission.

Jun 09, 2008 | 1998 Jeep Wrangler

Not finding what you are looking for?
1979 Harley Davidson XLH 1000 Sportster Logo

314 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4521 Answers

Mike

Level 3 Expert

4339 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...