Signal lights will work sometimes, but not others. Emergency flashers still work all the time.

What is a hazard switch and where is it located?
The hazard switch allows you to turn on your hazard or emergency flasher lights. When you press the button, all four of your turn signal lights will flash simultaneously. This is a useful way to warn other drivers of potential hazards or to make your vehicle visible during a breakdown, especially at night, and is an important safety feature of any vehicle.

The hazard switch is frequently mounted on the dashboard. Sometimes it is mounted to the steering column or attached to the turn signal switch. The button is marked with one triangle inside another triangle. This part is also commonly referred to as a hazard or emergency flasher switch, hazard or emergency light switch, hazard warning switch, or simply just a flasher switch.

Sometimes there are 2 flashers, one for the 4-way emergency and the other for turn signals.

Little confused about brake lights turning on/but not flashing. There is a switch on the brake pedal lever or on the clutch lever depending if it has a manual transmission. This switch often gets hit by the drivers feet and dislodged or broken. If it is broken it can do weird things by routing electric to wrong places. Since you have brake lights it is less likely to be bad but worth a look.

Turn signal stalk. Can break in so many ways. One thing to try is to push the 4-way flasher off and on about 20 times. The internal contacts for the flashers share the emergency function. Using the 4-way button can re-shift the contacts back to normal.

try the emergency flashers to see if they work and at the same time check all the signal bulbs to make sure they are working. if so then the signal flasher is probably bad and needs replacing. there are 2 units one for the emergency and one for the signal flashers.

located under dash to left of the steering colume. note there are 2 flasher relays one for the emergency flashers and the other is the signal flasher. to know which one is the signal one turn on the emergency lights and look for the flasher the one that is clicking is the e-flasher. the signal flasher looks the same locate it and replace.

A bad flasher relay would do that. They are usually located on the fuse panel and plug into it.

Problem should be in the multifunction turn signal assymbly. It controls the headlights, and flasher.

turn on the emergency flashers(e-flashers)if they work check the bulbs at the same time.if this is good then check the fuses.you may have a problem with the turn signal flasher needing replacing.this is a different flasher than that of the e-flasher,looks the same but a different flasher.usually located on or around the fuse panel under the dash.the brake light problem could be a misadjusted switch or a bad switch.the switch is at the base of the brake pedal and has two wires to it.one wire will have power all the time and the other wire will only have power on it when the brake pedal is pushed.if not then the switch will need replacing.check for broken wires at the switch as these sometimes break causing a problem.

The flasher may have gone bad for the turn signal, and there may be a second flasher for the emergency flasher lights. Look and listen for a click of the flasher for the emergency flasher lights. Then, the other flasher is the one to replace.

Good luck on this repair.

check if bulbs are burns

replace flasher, or switch with emergency flasher to test.. Should be in with fuses or in that area.