Question about 1989 Honda CBR 600 F Hurricane

2 Answers

Need to change oil any tips and how many quarts go back 3?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,978 Answers

You will need at least 4 quarts of oil , a spin on filter, and a filter wrench. Most Honda's of your vintage use 3.4 quarts so fill carefully and do not over fill the motor. Check the level with the motorcycle standing up straight. Be sure to use only oil that has the JASO MA certification on the label. Do not use any oil that says Energy Conserving on the label it will shorten the life of the wet clutch and transmission gears. Use 10w-40 in colder climates and 20w-50 in summer or warmer climates. Synthetic oils will help your cycle run cooler and shift easier.

Posted on Sep 14, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Don't put synthetic in the 11987 cbr 600 it does not like it makes the clutch and gears stick

Posted on Feb 13, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

My problem is when driving, the engine rattles bad especially when accelerating, I had noticed my oil level looked empty


Most engines take at least 5 quarts of oil. Have you check the dip stick to see how much is in there?

Mar 16, 2016 | 2007 GMC Envoy

1 Answer

Undhow many litres of oil nissan patrol 3.0d need for oil Change


Try 4 quarts and start the engine to fill the filter. Shut engine off, wait 15 minutes for the oil to go back to the pan, then check the oil dipstick. If it's low, put in another quart.

Sep 24, 2014 | Cars & Trucks

1 Answer

Hi. I have 2007 Mercedes GL450 , Can you help me with oil change and oil filter change.Please tell me How to do it properly? The nearest Mercedes service is over 500 km. thanks alot, A


BEST TO LET DEALERSHIP CHANGE ENGINE OIL.YOU NEED A DEALERSHIP OIL FILTER.YOUR OIL FILTER INSIDE A HOUSING ON FRONT SIDE OF THE ENGINE. CHANGING YOUR OWN OIL NOT HARD.YOU NEED 9 QUARTS OF OIL LOOK INSIDE GLOVECOMPARTMENT FOR OWNERS MANUAL TO SEE WHAT TYPE OF ENGINE OIL YOU NEED TO USE AND HOW MANY QUARTS.IF YOU DONT CHECK READ MANUAL TO SEE WHAT OIL TYPE AND QUARTS YOU NEED. IF YOU BLOW OR DAMAGE THE ENGINE WARRANTY WILL NOT COVER THE ENGINE.FIRST OF ALL TO CHANGE ENGINE OIL YOU CRANK VECHICLE UP LET IDLE FEW MINUTES TO THIN OUT OIL THEN YOU TURN OFF ENGINE. YOU NEED TO RAISE VECHICLE USING THE FACTORY JACK.USE JACK STANDS. LOOK IN OWNERS FOR CAR JACK LIFTING LOCATIONS TO KEEP FROM DAMAGING ROCKER PANELS. AND PLACE A DRAIN PAN UNDER THE OIL PAN. UNDER THE VECHICLE.YOU NEED A WRENCH TO REMOVE OIL PAN DRAIN PLUG.WHEN ALL THE OLD OIL DRAIN OUT IN THE DRAIN PAN.SCREW BACK IN THE DRAIN PLUG TIGHTEN IT DONT OVER TIGHTEN STRIP THREADS.THEN YOU NEED SOCKET TYPE OIL WRENCH YOU USE WITH A 3/8 RATCHET WRENCH REMOVE OIL FILTER HOUSING.PLACE RAGS AROUND THE OIL FILTER HOUSING TO CATCH OIL SPILL. YOU WILL NEED TO GO TO THE DEALERSHIP FOR THE OIL FILTER AND FILTER HOUSING O RINGS. ONCE YOU GET NEW OIL FILTER AND O - RINGS INSTALL THEM IN THE OIL FILTER HOUSING.LOCATED OIL FILLER CAP ON VALVE COVER UNDER THE HOOD.REMOVE OIL FILLER CAP.POUR OIL IN ENGINE USING A FUNNEL.ENGINE HOLDS ABOUT 8.5 TO 9.0 QUARTS OIL. BUT LOOK IN THE OWNERS MANUAL CHECK HOW MANY QUARTS ENGINE NEED.CHECK OIL DIP STICK OIL LEVEL SHOULD BE ON THE FULL MARK ON THE ENGINE OIL DIP STICK.TO BE ON THE SAFE SIDE BUY 10 QUARTS OF OIL FOR A EXTRA.DONT OVER FILL MAKE SURE YOUR OIL LEVEL CORRECT.OIL DRAIN PLUG AND OIL FILTER TIGHT BEFORE CRANKING THE ENGINE.LOOK IN THE OWNERS MANUAL FOR OIL DIP STICK AND LOCATION.

Nov 05, 2010 | 2007 Mercedes-Benz Mercedes Benz Gl 450

2 Answers

How minny quarts of oil dose a 96 olds aurora hold


A typical automobile holds 4-5 quarts of oil.....Depends on the size of motor. If changing yourself, Drain out all oil, change filter, put oil plug back in. Put 3- 31/2 quarts back into car. put oil cap on and start car. Let run for 2-3 minutes then shut back off. Wait for a few. Pull out dipstick wipe, put back in then pull out a second time...Now you know how much you need to top off level.

Sep 21, 2010 | 1996 Oldsmobile Aurora

2 Answers

I need to know how much oil to put into mi toyota starlet 1984 3k cause i dont have a dip stick


Most vehicles when changing oil uses 5 quarts of oil. I believe that is any vehicle even trucks after you have drained the old oil out of it and is changing your oil. It should last a good 5 months but it is best to change your oil about every 3 months. that is what we do around here and we have 4 vehicles

May 28, 2010 | 1984 Toyota Starlet

1 Answer

I have a 1987 pointiac Fiero. It has the 2.5L 4


It gives 3 quarts just as a starting point, it says this for the 4-cyl and 6-cyl, just so you don't overfill it. The distance between the two marks/notches on the dipstick represents 1-quart. If it's exactly on the low mark, then add 3/4 of a quart and see where it ends up, should be about 3/4 of the way to the other notch. Don't add quarts at a time, overfilling your oil can be just as bad or worse than if you underfill it. You'll be breaking oil seals all over....not good! :)

have fun

May 15, 2010 | 1987 Pontiac Fiero

1 Answer

How to change oil in poulan pro 650 series model hp-22 mower


Drain plug is under the motor. tip the hole machine back, (handle lying on ground) put something heavy on handle to hold it down, the plug usually is a 1/2 size wrench. Put a pan under machine to catch the oil. Take the drain plug out, drain oil, put drain plug back in, tighten it, and put machine back on all four wheels. Add oil. Take about 3/4 quarters of a quart. SAE 30 or 10w-30.

Apr 14, 2010 | Poulan Pro 22" Self Propelled High Wheel...

2 Answers

I have a 1987 pointiac Fiero. It has the 2.5L 4


if you've added the oil and started the car and the oil level is at the add mark with the engine off, allowing a minute or so for the oil to drain back down to the oil pan, add 1 more quart

Mar 29, 2010 | 1987 Pontiac Fiero

1 Answer

2001 Ford windstar engine is loud engine light is


Try to change your oil and add one quart of lucas oil that will quiet your engine and will lubricate your valves too.
5 quarts of regular oil change. Pour 4 quarts of synthetic oil 5W30 and one quart Lucas Oil.

Dec 29, 2009 | 2004 Ford Windstar

Not finding what you are looking for?
1989 Honda CBR 600 F Hurricane Logo

357 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

yadayada
yadayada

Level 3 Expert

74945 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

216 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...