Question about 1993 Harley Davidson FLSTF Fat boy

1 Answer

What kind of passenger seat can you put in a 93 harley davidson fatboy? I just recently got the bike and it currently has a drivers seat which is a Corbin. I need to add a passenger seat and you can see that the bike previously did have a passengers seat because there is a single drill hole in the back center of the bike. Any suggestions?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

Corbin makes passenger seats for the bike too. Personally, I think the better value is a Mustang seat, they're high quality and less expensive. La Pera makes seats as well. There are lots of choices out there and most makers have a website. Go to
http://www.customchrome.net/icatalog/spreads.aspx?Page=265 and take a look at some seats, then go the manufacturer's website. I'm sure you can find something you like.

Good Luck
steve

Posted on Sep 13, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remove seat fatboy


Sorry you have not had an answer yet, I also do not have the expertise for that vintage. Please post a comment when you get an answer so others will get that knowledge.

Apr 30, 2014 | 1993 Harley Davidson FLSTF Fat boy

1 Answer

Where does ground cable attach on 93 fatboy?


I don't know exactly on your model. Most of the models you would remove the seat and look for the black ground wire from the battery going to a screw or bolt into the frame. There is no place that is more grounded than the negative post on your battery. From that negative post to anywhere on the frame where you can make a solid clean connection to the frame is as good as any. I reccomend you try making multiple ground to frame connections on your bike. (at least two) for safetty reasons.

Feb 12, 2014 | Harley Davidson Motorcycles

1 Answer

How to properly re-install pillion seat to driver on a 2003 fatboy


Hi Anonymous, call, take a ride or trailer your bike over to your local dealers service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary/possible and offer professional advice and assistance concerning your issue. Good luck have a nice day.

Jul 30, 2012 | 2003 Harley Davidson FLSTFI Fat Boy

1 Answer

I have a 2005 harley davidson fatboy and my problem is that when i try to start the bike it clicks really loud ?, the volts on my battery are 12.80, but when i put the bike on the 200 amp engine start it...


You cannot go by a volt meter reading to tell whether your battery is good or not. The battery will read 12 volts and still not have enough current to light a decent bulb on your bike. This is because the volt meter is designed not to load the battery down. You starter puts a tremendous load on the battery. I'd also avoid using the "boost" or "jump start" position on the battery charger. You can get a voltage spike from those things and take out some expensive electronics on your bike. Take the battery out of the bike and take it somewhere that can "load test" the battery.

Good Luck
Steve

Jul 22, 2011 | 2001 Harley Davidson FLSTF - FLSTFI Fat...

1 Answer

I am changing my 2000 fatboy seat to another seat just like it. The problem is the screws that are spring loaded on the seat are missing. Is there a kit or some tool that you can use to press new ones on...


Hi Lfw476, take a ride or trailer your bike over to your local dealers service/parts department, I'm sure they will be happy to take your Harley Davidson for a test ride if necessary/possible and offer professional advice and assistance concerning your issue. Good luck have a nice day.

Oct 14, 2010 | 2000 Harley Davidson FLSTF Fat boy

3 Answers

Can't get my seat off of my 2002 Harley Fatboy in order to change a fuse underneath so I can get it started.


To remove the seat on a 2002 Fatboy:
1. Unbuckle the ******** the seat by pushing the metal part of the strap down from the left hand side of the seat.
2. There are two bolts located underneath the seat on the sides one on the left and another on the right which you have to unscrew.
3. There is another bolt located behind the passenger seat that you have to unscrew lift the seat up and that should do it.
PS When reinstalling the seat watch out for the bolt on the passenger seat not to scratch the tail of your bike.

Mar 07, 2010 | 2002 Harley Davidson FLSTF - FLSTFI Fat...

1 Answer

How do you remove passenger and driver seat from 2000 HD fatboy


with a stock seat there is 3 connection points, 1 under each side flap of the riders seat, the last one is behind the seat. If the grab strap is what is giving you a problem, on the left side of the bike where the strap is attached can be slipped down with an egg shaped slip on the strap. Special note: The 2 bolts under the flaps is a real "P.I.T.A." to get back on, if it hasn't been off a few times, and the bolts will strip, so use caution.

Feb 15, 2010 | 2000 Harley Davidson FLSTF Fat boy

1 Answer

My bike was runing good it,s a94 fatboy the other


Sounds like your voltage regulator is bad or come unplugged

May 09, 2009 | Harley Davidson Harley-Davidson Motorcycle...

1 Answer

Overcharging on a 93 fatboy


Hi,

The only defect a stator would have is it's either delivering no or low voltage output. By design, it will always put out higher voltage than required. It is the job then of the regulator to control how much is pushed to the battery. If the battery is overcharging, then the regulator would be at fault.

Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

May 11, 2008 | Harley Davidson Harley-Davidson Motorcycle...

1 Answer

Pillon for 06' Fatboy FLSTFSE2


aftermarket is really tricky stuff bro sometimes some blacksmithing is required. oem is the easy and convenient way to ride and cool is not a bolt on accessory. you got to have class to show it. measure the locations and make the appropriate penetrations there is nothing sacred about the rear fender of your put so drill a whole in it and tack weld a nut underneath or just reach up there and catch it and be done widdit. like the guy on the gazelle infomercial said "you can do it!"

Mar 16, 2008 | Harley Davidson Harley-Davidson Motorcycle...

Not finding what you are looking for?
1993 Harley Davidson FLSTF Fat boy Logo

Related Topics:

129 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...