Question about Harley Davidson FXSTS Springer Softail Motorcycles

1 Answer

I don't have one - I am fixing a problem and need a drawing/spec sheet w/torque specs for motor hub nut and clutch hub nut and are these two hub nuts right or left hand thread.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 4,565 Answers

Regrettfully, you didn't tell me what year or model bike you're working on. If it's an Evo engine or a Twin Cam, Torque the compensator sprocket (engine nut) to 150-165 Foot pounds. Put two lines of Loctite #271 (red) in the nut.

The mainshaft nut inside the clutch torques to 70-80 foot pounds with one line of Loctite #271. This nut has LEFT-HANDED TREADS.

Good Luck
Steve

Posted on Sep 13, 2010

Testimonial: "Steve thanks very much - I chose a bike in the drop-down box closest to my bike ~ Rev-Tec 2006 100cu in w/rev-tec 6speed trans and BDL-EVO 141 belt"

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need torque specs for 02 yz 250f


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
YZ 250 Torque Specs
Part 23 Assembling 4 stroke Clutch Hub and primary Drive YZ250F example
YAMAHA YZ250F Owner Service Manual
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-yz-owners-manuals

Jul 22, 2012 | Yamaha YZ 250 F Motorcycles

2 Answers

I need the torque specs for a 6 cyl 2004 Dodge Dakota 2 wheel drive- front wheel hub. In inch-lbs if possible.


Spindle nut. Tighten the nut to 185 ft. lbs. (251 Nm). Inch pounds is not an option, this critical torque spec is FT lbs.

Apr 26, 2011 | 2004 Dodge Dakota

1 Answer

Tork specs for clutch 71 sportster XL


The clutch hub nut, the large nut holding the inner and outer clutch hubs on, torques to 110-150 foot pounds. The mainshaft nut that holds the front final drive chain sprocket on torques to 35-65 foot pounds. Engine sprocket nut torques to 150-165 foot pounds. Use two lines of Loctite 271 (high strength, red) on the sprocket shaft. The six small 1/4" nuts that go on the outside of the clutch have no torque specs. The manual says to "tighten nuts until releasing disc bottoms on spacers". Torque them like you would any other 1/4" nut, about 10-14 foot pounds. They should be nylock or self locking type nuts. If not, you can use a drop of Loctite 242 (medium strength,blue) on each threaded stud.

Dec 12, 2009 | 1979 Harley Davidson XLS 1000

3 Answers

Torque on a 2000 dodge neon spindle nut the nut on the front passenger side hub


If you are looking for the spec on the large nut for the CV axle to hub it is 180 ftlbs

Oct 06, 2009 | 2000 Dodge Neon

1 Answer

Need the torque specs on clutch for a 85 FLHTC


The torque specs are the same as with any Evolution engine. The compensator sprocket 150-165 foot pounds.
Clutch hub nut (left handed threads) 60-80 foot pounds.

Use Loctite 271 on threads. Two lines in nut on Compensator and one line in clutch hub nut.

Jul 27, 2009 | Harley Davidson FLHTC - FLHTCI Electra...

1 Answer

Need the torques specs for the 2 nuts on the clutch on a harley


50 ft lbs and it is a left is tight nut...don't worry about adjuster nut on clutch just good ole tight will work on that one. compensating nut ( one in front) is 150 ft lbs.

Jul 24, 2009 | 2002 Harley Davidson FXD Dyna Super Glide

1 Answer

Need the 2000 Buick LeSabre rear wheel Hub nut torque spec.


Those are not nuts, they are bolts. The torque spec for those bolts is 52ft.lbs

Jul 12, 2009 | 2000 Buick LeSabre

2 Answers

Front Hub Bearing Torque specs to complete replacement


THE LUG NUT TORQUE SPEC - 140FT/LBS\
CALIPER MOUNT - 80FT/LBS
CALIPER BRACKET 129FT/LBS
AXLE NUT 177FT/LBS

Apr 24, 2009 | 2003 Chevrolet Silverado 1500

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

4514 Answers

Gills Lango

Level 2 Expert

195 Answers

Mike

Level 3 Expert

4336 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...