Question about Yamaha TT-R 125 E Motorcycles

2 Answers

I have a Yamaha 250 4X4 Timberwolf, haven't had it very long but have taken it out two times so far. The last time was about 2 months ago when i went thru mud and water. I cleaned the unit up as good as I could and it has been in the garage since. Tried to get it out a couple of days ago to find all brakes appeared to be locked down. I finially got the front ones broken loose but cant get the drums off. The back one has been much tuffer. I did get it to move some but now it is locked down and no movement at all. I cant get the drum off of this one as well. Any thoughts on how I can get the drums off? I worked on many cars with this situation but this 4X4 is a bit more difficult. Any help would be great.

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Set the adjustment5 lever to zero tension and then tap the outer brake hub with a mallet while gently prying on the hub, the brake shoes will eventually come unstuck. Once you get the hub off have it cleaned on a lathe and replace shoes if needed, most of the time not needed, then if you will notice the rubber gasket around your brake backing plate is horribly filthy, clean it really goo and smear a litlle grease on to keep it lubed up. the reson your brakes stuck was because the mud and water got past your rubber gasket. DO NOT PRY ON THE GASKET! reassemble and have fun.

Posted on Oct 27, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Timberwolf 250 once the 4 wheeler get hot starts to back fire will not re start

Posted on May 04, 2011

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: what is valve clearance for a 250 yamaha timberwolf

what an *******. If I had a manual or my library had one I wouldnt be asking the question. If I need help fixing something dont tell me to go jump in a lake just dont answer

Posted on Nov 08, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1999 Yamaha Timberwolf 250 will not turn over. Took it to someone they said it was stator. Replaced stator and spark plug still wont turn. There's no noise anywhere.


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary.
4. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
5. Tip over sensor needs a reset.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand or clutch pull in switch/sensor.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
1994 Yamaha Timberwolf 4x4 Electric Start Problems
no fire 96 timberwolf
http://www.mikekekich.com/92-98%20Timberwolf%202WD%20Service%20Manual.pdf
OEM parts for Yamaha
Yamaha YFB250K Timberwolf Owner Manual

Jan 13, 2017 | Yamaha Motorcycles

1 Answer

Reset timing on 1995 250 Yamaha 4wheeler


Hi, Dessie sorry you can't find the first and best tool you ever bought for your Yamaha despair not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha timberwolf 250 setting timing and valve setting
YouTube How To Set Cam Timing
ATV Connection
http://www.yamaha-motor.com/assets/service/manuals/1999/lit-11626-12-45_339.pdf

Apr 14, 2016 | Yamaha Motorcycles

1 Answer

Yamaha Timberwolf. How can I find model number to order parts


If you can tell me your vin - or your year I can tell you what model you have. But - if you go onto any parts site - such as cheapcycle.com or partsmonster - you name it - you won't need your 'model' # - just your year. You'd click - Yamaha OEM Parts, then ATV then Year - 1992 - 1998 was the Timberwolf - a lot of parts from the 99 - 04 Bear Tracker will work (just about only changed the plastics and carb in 99 - 04) same engine/transmission/rear end, etc. the brakes also went from drum to disc - but you'd click on the year - and then look - the timberwolf will be right there the 1992 - 1998 Yamaha Timberwolf 250 - I can't remember if they offered a timberwolf 350. If you can tell me the vin or year - like I said - I'll reply with your exact model # - but you can buy and order most parts just by model name and year 95 Timberwolf.

Dec 29, 2015 | ATVs

1 Answer

Yamaha Timberwolf. How do I find model number to order parts?


I apologize - my answer to the previous question didn't really clarify your actual question - Your VIN can be found along the frame rail - left hand side - about a foot or so ahead of your left foot guard -

26028714-jbdqfs5232kzbw0rj532ox50-2-0.png

If it's still there - your model number is here:26028714-jbdqfs5232kzbw0rj532ox50-2-2.png

If you can read your VIN - and here's a tip to know you're getting the whole number and it's not rusted away a digit; your second digit should be a (Y) - if you write down your VIN, second digit is Y so you know the placement is right - the 10th digit is the year. And here are the breakdowns for that 10th Digit:

(For all Yamahas - not just the Timberwolf):
88 - J, 89 - K, 90 - L, 91 - M, 92 - N, 93 - P, 94 - R, 95 - S, 96 - T, 97 - V, 98 - W, 99 - X, 2000 - Y, 01 - 1, 02 - 2, 03 - 3

From 1992 - 1998 the Yamaha 250 4-stroke, shaft drive, trail bike was the Timberwolf.

From 1999 - 2004 the Yamaha 250 4-stroke, shaft drive, trail bike was the Bear Tracker.

*****SAME ENGINE, SAME TRANSMISSION, SAME REAR END, TIRE SIZE, PULL START - THINGS THEY DEFINITELY CHANGED IN 1999 WHEN THEY STARTED CALLING THEM THE BEAR TRACKER: - PLASTICS BECAME A LITTLE LONGER I BELIEVE; AND THE SEAT WITHOUT A DOUBT BECAME LONGER. THE CARB WENT TO A CONSTANT VACUUM - INSTEAD OF THE SLIDE CARB WHERE THE THROTTLE CABLE WENT THROUGH THE CAP LIKE THE TIMBERWOLF. HARD TO REMEMBER - BUT I THINK THE TIMING CHAIN TENSIONER BECAME UNADJUSTABLE - AND NOT MUCH ELSE CHANGED. IN 99 THEY EVEN KEPT THE BRAKING SYSTEM THE SAME. SOMETIME AROUND 2000, 01 OR SO THE BRAKE SYSTEM CHANGED FOR THE FRONT WHEN YAMAHA WENT TO DISC BRAKES. HOPE THIS HELPS. ANYTHING ELSE YOU NEED TO KNOW ABOUT YOUR TIMBERWOLF JUST LET ME KNOW - I'VE OWNED, REBUILT, BOUGHT, SOLD, TRADED A TON - I'VE CURRENTLY GOT A 99 BEAR TRACKER THAT IS THE MOST DEPENDABLE 250 4 STROKE I'VE EVER OWNED AND A 1996 YAMAHA WOLVERINE 350 4X4 - I'VE REBUILT THEM FROM THE BOTTOM TO THE TOP. THOSE BIKES ARE GOLDEN IF YOU TAKE CARE OF THEM AND DO A LITTLE ROUTINE MAINTENANCE. ALL THE BEST - JUSTIN MCCARTNEY

THE 99 I MENTIONED THAT I STILL HAVE:
26028714-jbdqfs5232kzbw0rj532ox50-2-5.jpg

A 98 I BOUGHT WITH THE ENGINE IN A MILK CRATE THAT I BOUGHT, REBUILT & SOLD:
26028714-jbdqfs5232kzbw0rj532ox50-2-9.png

A 2004 I BOUGHT, REBUILT AND SOLD:
26028714-jbdqfs5232kzbw0rj532ox50-2-14.jpg
All the best - let me know if you're ever in a jam with yours; not too much I haven't seen, fixed or had to deal with.

Dec 29, 2015 | ATVs

1 Answer

'92 yamaha timberwolf valve adjustment


Here's the info you're looking for.

1992-1998 Yamaha Timberwolf 2WD and 4WD
Intake: 0.05 - 0.09 mm (0.002 ~ 0.004 in)
Exhaust: 0.11 - 0.15 mm (0.004 ~ 0.006 in)

Jun 20, 2014 | RTO 200cc Full Size Four Wheeler ATV

1 Answer

250 timberwolf


consult manual this is a little involved need to follow instructions very carefully. Damage to valve can occure when done wrong.

Mar 31, 2014 | Yamaha Timberwolf 250 2wd 97 Airbox Air...

2 Answers

Yamaha timberwolf 250


My 1994 Yamaha Timberwolf starts but won't idle properly. Sometimes when it quits it backfires. What could the problem be?

Aug 13, 2009 | 1996 Yamaha FZX 250 Zeal

1 Answer

98 Timberwolf will not idle and has a rolling rattle sound in crank case sound dose not change when you throttle it up


It needs a doctor - it's a '98 two stroke - when was the last time the seals and bearings were replaced?

Jun 28, 2009 | 2003 Yamaha YZ 250

2 Answers

Setting Timberwolf 250 timing


I think your bike has CDI ignition which means the ignition timing is fixed and cannot be changed. Are you having a problem of some sort?

Apr 23, 2009 | 1990 Yamaha TZR 250

1 Answer

Fuji FinePix S5000


This appears to be loose connector to the motherboatd from the screen.
Try gentle squeezing of the casing near the bottom of the body
This may do the trick- otheriwise it is a workshop job and frankly not worth the cost - the money would be better spent on a more uptodate camera.

Nov 27, 2007 | Fuji FinePix S5000 Digital Camera

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

430 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

dhnguyen

Level 2 Expert

281 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1144 Answers

Tony

Level 3 Expert

2600 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...